dpannell2 Posted August 24, 2018 Posted August 24, 2018 I ordered some parts a while ago to build a few displays for my machines. I decided to make up a few extra displays with the parts I have left. I've sold a few here and I have a few left. PM me if you have any interest. The displays have the SD card reader, no wifi. I also have some shields and power supplies and frames. While they last...
cb3 Posted August 26, 2018 Posted August 26, 2018 Dan got me setup with three devices and they were all TOP NOTCH QUALITY and LOOK AMAZING! He ships fast and also helps with setup if you need, I highly recommend him if you need a pin2dmd!
tiim Posted August 30, 2018 Posted August 30, 2018 I just received a completed kit from Dan. He shipped it quickly and was there for me when I had questions. I'm new to this forum, but I can say I'm sure glad I found it! Tiim
EddCase Posted August 31, 2018 Posted August 31, 2018 Dan Shipped to me and was wonderful at answering all my questions. I cannot praise him enough. It did seem to go missing for a while and he offered to send me out a replacement. Thankfully it started showing up on tracking again. This was shipped to the UK. Thanks again Dan really quality soldering job and everything works flawlessly
delt31 Posted October 5, 2018 Posted October 5, 2018 Another happy customer - I received the pin2dmd in no time works perfect thanks!
dpannell2 Posted October 20, 2018 Author Posted October 20, 2018 Thanks everyone for the feedback, much appreciated. I still have some complete displays and parts left. Please send a PM if you need something.
outhere Posted October 28, 2018 Posted October 28, 2018 I paid for it on August 24th had it in hand on August 27, very fast shipping I now have it installed and works perfectly, very helpful with questions
adamcian Posted November 16, 2018 Posted November 16, 2018 Ordered my DMD from Dan after a quick DM convo and got it within 2-3days, SUPER well packed and ready to rock once I activated it with Lucky1. Worked right away and have been working through the config side since getting it ready for my VPin cab:
dpannell2 Posted November 21, 2018 Author Posted November 21, 2018 Hi Adam, Glad you got it running. Please post some pics once you get it up and running in your cabinet.
Content Provider malenko Posted January 1, 2019 Content Provider Posted January 1, 2019 Its great to order something and get it a few days later. I really appreciate the fast shipping dpannell2
dpannell2 Posted January 3, 2019 Author Posted January 3, 2019 Hi Malenko, Thanks for the nice feedback. Thanks for all the great colorization work you have done. I'm looking forward to seeing your next project!
Gwen Posted January 5, 2019 Posted January 5, 2019 I ordered a pin2dmd from Dan and had it installed in my cabinet just a few days later (and I live across the continent from Dan). I have to say the build work is extremely professional and I have had no problems at all with it! It took me a day or so working on configuring the software to run with all the different pinball apps I'm using but the results are just beautiful. I will post a few photos and maybe a video of my cab with the pin2dmd running in a few days. I am currently doing a bit of work on finishing detailing on the cabinet and would rather get the images when it's finished. Thanks again Dan, great job! Gwen
Thalamus Posted January 5, 2019 Posted January 5, 2019 I live in Europe and the day after I've picked up the parcel. Dan contacted me asking if everything was ok. For anyone that is looking for a pre-built Pin2dmd. You will be very lucky if Dan is still making these. Both looked and feels like a professional build. That's all I have to say about the matter.
dpannell2 Posted January 5, 2019 Author Posted January 5, 2019 6 hours ago, Gwen said: I ordered a pin2dmd from Dan and had it installed in my cabinet just a few days later (and I live across the continent from Dan). I have to say the build work is extremely professional and I have had no problems at all with it! It took me a day or so working on configuring the software to run with all the different pinball apps I'm using but the results are just beautiful. I will post a few photos and maybe a video of my cab with the pin2dmd running in a few days. I am currently doing a bit of work on finishing detailing on the cabinet and would rather get the images when it's finished. Thanks again Dan, great job! Gwen Thanks Gwen, Glad you got it installed. I would love to see some pics once you get everything sorted with your build.
Gwen Posted January 9, 2019 Posted January 9, 2019 Ok I finally shot some photos of the cabinet as promised. You can see the brass inlay work I did earlier this week on the lockdown bar in the last photo. That took several days and a lot of freaking work. I still need to re-stain the lockdown bar darker. I also replaced my dmd monitor with the PIN2DMD with which I am extremely happy ? Gwen
Content Provider NetzZwerg Posted January 9, 2019 Content Provider Posted January 9, 2019 That looks really great and unique!
Gwen Posted January 9, 2019 Posted January 9, 2019 8 hours ago, NetzZWerg said: That looks really great and unique! Thanks ?
dpannell2 Posted January 9, 2019 Author Posted January 9, 2019 Very cool! Love that backbox and lockdown bar. You are an artist!
zeenon Posted January 21, 2019 Posted January 21, 2019 Just another vote for Dan if you're in the market for a pin3dmd in the US. I ordered Friday and it was on my door step by Monday. Dan answered all my questions and checked in to make sure every thing was working!!! Z
dpannell2 Posted January 27, 2019 Author Posted January 27, 2019 Thank You Bill, it looks great in your cabinet. The spider man colorization looks especially good. I need to get that one on my machine.
slippifishi Posted February 16, 2019 Posted February 16, 2019 And another satisfied UK purchaser here - thanks Dan! Excellent quality unit and no problems getting it set up and working fine with 220v, no further modification required! I will be using it mostly with my desktop for real time previews and play testing, but I may eventually migrate it to my pincab, who knows...
dpannell2 Posted February 20, 2019 Author Posted February 20, 2019 Hey Slippi, Glad to hear that things are running well for you. Thank you for the post and for all the colorization work you have been doing!
nitroman28 Posted February 23, 2019 Posted February 23, 2019 Can these be used in a real pin like Metallica?
Content Provider lucky1 Posted February 23, 2019 Content Provider Posted February 23, 2019 5 hours ago, nitroman28 said: Can these be used in a real pin like Metallica? yes
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now