help please with zeb board and shaker in dof

[World-of-Virtual-pinball]

Can anybody please help as im pulling my hair out...i have purchased a shaker motor along with a plunger ki from zeb board. i have followed all the set up but my shaker doesn't run, im trying it with the medieval madness table

the shaker is connected to port 2 on the output board and ive created the files from the dofconfig tool here. i have directoutput on c: drive and visual pinball has a short cut to point to this.

if anybody could please help id be most greatfull ( please let me know what files i need to show )  ihave uploaded my setting for you which may help.

Many thanks in advance.

directoutput.rar

[World-of-Virtual-pinball]

progress but still have this error can anybody assist ??

 

2018.02.02 00:28:16.499    DirectOutput Logger initialized
2018.02.02 00:28:16.500    DirectOutput Version 0.9.5812.27024 as of 2015.11.30 15:00
2018.02.02 00:28:16.500    Global config loaded from: C:\DIRECTOUTPUT\GlobalConfig_B2SServer.xml
2018.02.02 00:28:16.500    Loading Pinball parts
2018.02.02 00:28:16.500    Loading cabinet
2018.02.02 00:28:16.502    Will load cabinet config file: C:\directoutput\config\cabinet.xml
2018.02.02 00:28:16.594    1 output controller defnitions and 1 toy definitions loaded from cabinet config.
2018.02.02 00:28:16.594    Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2018.02.02 00:28:16.595    Cabinet auto configuration started
2018.02.02 00:28:16.619    Debug: Ledwiz devicelist content. Handles: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, Num devices: 0
2018.02.02 00:28:16.620    Debug: Disposing LedWiz instance -01.
2018.02.02 00:28:16.621    Cabinet auto configuration finished
2018.02.02 00:28:16.621    Autoconfig complete.
2018.02.02 00:28:16.621    Cabinet config loaded successfully from C:\directoutput\config\cabinet.xml
2018.02.02 00:28:16.621    Cabinet loaded
2018.02.02 00:28:16.621    Loading table config
2018.02.02 00:28:16.622    Warning: No table config file found. Will try to load config from LedControl file(s).
2018.02.02 00:28:16.622    Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName cc_13
2018.02.02 00:28:16.635    No directoutputconfig.ini or ledcontrol.ini files found.
2018.02.02 00:28:16.636    No config for table found in LedControl data for RomName cc_13.
2018.02.02 00:28:16.637    Table config loading finished
2018.02.02 00:28:16.637    Pinball parts loaded
2018.02.02 00:28:16.637    Starting processes
2018.02.02 00:28:16.637    Initializing cabinet
2018.02.02 00:28:16.637    Debug: Initializing output controllers
2018.02.02 00:28:16.640    FT245RBitbangController Zebsboards 1 with serial number ZBPLUNGE01 has been initialized and the updater thread has been started.
2018.02.02 00:28:16.640    Debug: Output controllers initialized
2018.02.02 00:28:16.643    Cabinet initialized
2018.02.02 00:28:16.647    Loading shape definition file: C:\DIRECTOUTPUT\DirectOutputShapes.xml
2018.02.02 00:28:16.660    Connection to FTDI chip ZBPLUNGE01 established.
2018.02.02 00:28:16.702    Framework initialized.
2018.02.02 00:28:16.702    Have fun!
2018.02.02 00:28:49.260    Finishing framework
2018.02.02 00:28:49.262    Finishing cabinet
2018.02.02 00:28:49.263    Debug: Finishing output controllers
2018.02.02 00:28:49.368    Connection to FTDI chip ZBPLUNGE01 closed.
2018.02.02 00:28:49.368    FT245RBitbangController Zebsboards 1 with serial number ZBPLUNGE01 has been finished and the updater thread has been terminated.
2018.02.02 00:28:49.368    Debug: Output controllers finished
2018.02.02 00:28:49.368    Cabinet finished
2018.02.02 00:28:49.368    DirectOutput framework finished.
2018.02.02 00:28:49.368    Bye and thanks for using!

[World-of-Virtual-pinball]

YAY sorted !!!!!! i found i needed to manually alter the globalconfig location and add \config and also alter the output port to 3 and its working all i can say is a massive THANKS!!!! To everyone that has helped me get through this and get my shaker working in Visual Pinball :-).

So onto to the next project getting it working in FP and FX2 and 3....any takers ??

Ian.