flippnswitchez Posted January 29, 2017 Posted January 29, 2017 Was able to get the firmware flashed and drivers installed, but when installation completed, instead of the logo and key, I get the distorted image in the pictures. The power supply being used is a 5v 15A arcade power supply. If the voltage is adjusted any higher or lower the display flickers and becomes even more distorted. Any help with this would be greatly appreciated.
flippnswitchez Posted January 29, 2017 Author Posted January 29, 2017 P2.5 high resolution SMD RGB led modules 128*64pixels,320mm*160mm from AliExpress
Rappelbox Posted January 29, 2017 Posted January 29, 2017 Could you please post a pic of the back, especially the connector and the printed text next to it?!
Rappelbox Posted January 29, 2017 Posted January 29, 2017 These panels won't work, sorry but I have to tell you that! They are 32 scan and you need 16 scan. Try to get new ones from the seller. Additionally you should look for 64x32 panels, because you have to mount 2 in series to get the needed 128x32 resolution. Could you point me to the original item (pm) I'll check if the seller made a wrong description.
flippnswitchez Posted January 29, 2017 Author Posted January 29, 2017 Just tried, it says that I cannot send you a message.
flippnswitchez Posted January 29, 2017 Author Posted January 29, 2017 https://www.aliexpress.com/item/P2-5-high-resolution-SMD-RGB-led-modules-128-64pixels-320mm-160mm/32360888193.html?spm=2114.13010608.0.0.cQ25xy I ordered these so long ago and I'm just now getting around to doing this, so I doubt they'll do anything about it. Been debating on ordering your v3 kit, but was curious about the shipping to the US.
Rappelbox Posted January 29, 2017 Posted January 29, 2017 I doubt that too. And seem like the description is correct. I have new sets available in mid-February and shipping to US is not that expensive on these sets ~20,- USD
Recommended Posts
Archived
This topic is now archived and is closed to further replies.