dawen Posted June 17, 2016 Posted June 17, 2016 I have tried to find diner with physmod 5 since my cab only runs pm5 and its my wifes favorite table but havent seen one. Anyone who knows if it is existing or if it is hard to convert an old table to pm5?
Content Provider gtxjoe Posted June 17, 2016 Content Provider Posted June 17, 2016 General approach here. You can be testing a table in 5 minutes. If you have questions or run into issue, ask for help http://www.vpforums.org/index.php?showtopic=33252&p=327707
dawen Posted June 18, 2016 Author Posted June 18, 2016 Thanks I have tried that now but it will not release any ball to the plunger when I start the game... can´t find anything wrong, the ball relase kicker seems to be set to the same value like on all other pm5 tables,, hit height 40 can't find anything about force on that kicker....
Content Provider gtxjoe Posted June 18, 2016 Content Provider Posted June 18, 2016 Share a link to your table and we can take a pook
dawen Posted June 18, 2016 Author Posted June 18, 2016 You can find my try here... I really don´t get what I did wrong. https://www.dropbox.com/s/k8pxbnuwo2ei0ga/Diner_FS_B2S.vpt?dl=0
jbg4208 Posted June 21, 2016 Posted June 21, 2016 Ok, the ball is catching on the apron, if you make it non collideable it will work. Also you need to move the plunger up so it can connect with the ball. Had a few quirky times with the ball would go crazy and roll up the walls and hang there going back and fourth.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.