outhere Posted September 29, 2018 Share Posted September 29, 2018 7 hours ago, CaptainYell0wJacket99 said: The log is an exert from my DirectOutput.log. Yes. the Teensy is showing as port 6 when plugged/unplugged. I didn't see that in any of the logs above Link to comment Share on other sites More sharing options...
outhere Posted September 29, 2018 Share Posted September 29, 2018 In one of your logs you state this I started DOF and opened my ACDC Luci table and then closed everything You should not have to start dof separate, it will start automatically when you play a game If you go to the VP editor Load the game and start a game from there and then close it, What does the log say then? Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 So maybe I'm misunderstanding the steps....My impression was that I needed to start DOF (or have Windows do so as part of WIn startup) before launching my front end (Pinup Popper) and tables. I don't have it set to start and win startup yet so I start it manually. The last error I showed above was from when I started DOF for the first time after Win startup. I can generate a log for either scenario (with or without launching a table), but figured if I'm getting the error at initial startup of DOF, then I need to address that before bothering to attempt with a table. Please let me know if my assumptions are incorrect. Sorry for the confusion. Link to comment Share on other sites More sharing options...
outhere Posted September 29, 2018 Share Posted September 29, 2018 21 minutes ago, CaptainYell0wJacket99 said: So maybe I'm misunderstanding the steps....My impression was that I needed to start DOF (or have Windows do so as part of WIn startup) before launching my front end (Pinup Popper) and tables. I don't have it set to start and win startup yet so I start it manually. The last error I showed above was from when I started DOF for the first time after Win startup. I can generate a log for either scenario (with or without launching a table), but figured if I'm getting the error at initial startup of DOF, then I need to address that before bothering to attempt with a table. Please let me know if my assumptions are incorrect. Sorry for the confusion. Let's try this do a fresh boot of the computer and then go to the VP editor Load the game and start the game then close it, then post the log... Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 15 minutes ago, outhere said: Let's try this do a fresh boot of the computer and then go to the VP editor Load the game and start the game then close it, then post the log... I just rebooted and ran VP editor, loading and running the ACDC Luci table. It did not create the DirectOutput.log file because DOF is not currently setup to start with Windows boot. I would need to manually start DOF before loading VP editor. I ran VP editor again after starting DOF and here is the log (Log includes start up of DOF and then loading and running of ACDC table. DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55 MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput 2018.09.29 10:39:27.711 DirectOutput Logger initialized 2018.09.29 10:39:27.615 Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok 2018.09.29 10:39:27.617 Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok 2018.09.29 10:39:27.618 Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok 2018.09.29 10:39:27.618 Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok 2018.09.29 10:39:27.619 Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok 2018.09.29 10:39:27.619 Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok 2018.09.29 10:39:27.620 Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok 2018.09.29 10:39:27.695 Finishing framework 2018.09.29 10:39:27.696 Finishing cabinet 2018.09.29 10:39:27.697 Debug: Finishing output controllers 2018.09.29 10:39:27.697 Debug: Output controllers finished 2018.09.29 10:39:27.697 Cabinet finished 2018.09.29 10:39:27.697 DirectOutput framework finished. 2018.09.29 10:39:27.697 Bye and thanks for using! 2018.09.29 10:39:27.699 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml" 2018.09.29 10:39:27.712 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml 2018.09.29 10:39:27.712 Loading Pinball parts 2018.09.29 10:39:27.712 Loading cabinet 2018.09.29 10:39:27.712 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml 2018.09.29 10:39:27.782 1 output controller defnitions and 3 toy definitions loaded from cabinet config. 2018.09.29 10:39:27.782 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig. 2018.09.29 10:39:27.783 Cabinet auto configuration started 2018.09.29 10:39:27.866 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log) 2018.09.29 10:39:27.873 Opening 32-bit LedWiz driver... 2018.09.29 10:39:27.873 Detected and added LedWiz Nr. 1 with name LedWiz 01 2018.09.29 10:39:27.873 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1 2018.09.29 10:39:27.876 Cabinet auto configuration finished 2018.09.29 10:39:27.876 Autoconfig complete. 2018.09.29 10:39:27.876 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml 2018.09.29 10:39:27.876 Cabinet loaded 2018.09.29 10:39:27.876 Loading table config 2018.09.29 10:39:27.876 No TableFilename specified, will use empty tableconfig 2018.09.29 10:39:27.876 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx 2018.09.29 10:39:27.877 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini 2018.09.29 10:39:27.880 Min DOF Version is 0.8 for file directoutputconfig.ini 2018.09.29 10:39:28.135 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini 2018.09.29 10:39:28.137 Min DOF Version is 0.8 for file directoutputconfig30.ini 2018.09.29 10:39:28.365 2 directoutputconfig.ini or ledcontrol.ini files loaded. 2018.09.29 10:39:28.366 Config for RomName doflinx exists in LedControl data. Updating cabinet and config. 2018.09.29 10:39:28.382 Table config loading finished: romname=doflinx, tablename=doflinx 2018.09.29 10:39:28.383 Pinball parts loaded 2018.09.29 10:39:28.383 Starting processes 2018.09.29 10:39:28.383 Initializing cabinet 2018.09.29 10:39:28.384 Debug: Initializing output controllers 2018.09.29 10:39:28.384 Warning: The specified Com-Port COM6 was not found. Available com-ports: COM5 2018.09.29 10:39:28.384 Warning: Settings for TeensyStripController LedStripController are not correct. Cant initialize. 2018.09.29 10:39:28.384 Debug: Initializing LedWiz Nr. 01 2018.09.29 10:39:28.385 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.29 10:39:28.386 Debug: Output controllers initialized 2018.09.29 10:39:28.386 Updater thread for LedWiz 01 started. 2018.09.29 10:39:28.389 Cabinet initialized 2018.09.29 10:39:28.390 Loading shape definition file: C:\DirectOutput\config\DirectOutputShapes.xml 2018.09.29 10:39:28.422 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:39:28.423 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixPlasmaEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:39:28.424 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:39:28.430 Framework initialized. 2018.09.29 10:39:28.430 Have fun! 2018.09.29 10:39:28.440 Initializing cabinet 2018.09.29 10:39:28.440 Debug: Initializing output controllers 2018.09.29 10:39:28.440 Debug: Output controllers initialized 2018.09.29 10:39:28.440 Cabinet initialized 2018.09.29 10:39:28.450 Opening 32-bit LedWiz driver... 2018.09.29 10:39:28.450 Debug: Initializing LedWiz Nr. 01 2018.09.29 10:39:28.450 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.29 10:39:28.450 Opening 32-bit LedWiz driver... 2018.09.29 10:39:29.698 Debug: Disposing LedWiz instance 01. 2018.09.29 10:39:30.433 Finishing framework 2018.09.29 10:39:30.433 Finishing cabinet 2018.09.29 10:39:30.434 Debug: Finishing output controllers 2018.09.29 10:39:30.434 TeensyStripController LedStripController finished and updater thread stopped. 2018.09.29 10:39:30.434 Debug: Finishing LedWiz Nr. 01 2018.09.29 10:39:30.434 Updater thread for LedWiz 01 terminated. 2018.09.29 10:39:30.446 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.29 10:39:30.446 Debug: Output controllers finished 2018.09.29 10:39:30.446 Cabinet finished 2018.09.29 10:39:30.446 DirectOutput framework finished. 2018.09.29 10:39:30.446 Bye and thanks for using! 2018.09.29 10:39:30.446 Initializing cabinet 2018.09.29 10:39:30.446 Debug: Initializing output controllers 2018.09.29 10:39:30.446 Debug: Output controllers initialized 2018.09.29 10:39:30.446 Cabinet initialized 2018.09.29 10:39:30.456 Opening 32-bit LedWiz driver... 2018.09.29 10:39:30.456 Debug: Initializing LedWiz Nr. 01 2018.09.29 10:39:30.457 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.29 10:39:30.457 Updater thread for LedWiz 01 started. 2018.09.29 10:39:30.457 Opening 32-bit LedWiz driver... 2018.09.29 10:39:30.704 Debug: Disposing LedWiz instance 01. 2018.09.29 10:39:32.704 Debug: Disposing LedWiz instance 01. 2018.09.29 10:40:22.215 ArtNet finished and updater thread stopped. 2018.09.29 10:40:22.215 PinControl finished and updater thread stopped. 2018.09.29 10:40:22.215 Debug: Finishing LedWiz Nr. 01 2018.09.29 10:40:22.215 Updater thread for LedWiz 01 terminated. 2018.09.29 10:40:22.227 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.29 10:40:22.227 ArtNet finished and updater thread stopped. 2018.09.29 10:40:22.227 PinControl finished and updater thread stopped. 2018.09.29 10:40:22.227 Finishing cabinet 2018.09.29 10:40:22.227 Debug: Finishing output controllers 2018.09.29 10:40:22.227 Debug: Output controllers finished 2018.09.29 10:40:22.227 Cabinet finished 2018.09.29 10:40:22.232 Debug: Disposing LedWiz instance 01. 2018.09.29 10:40:22.233 Debug: Disposing LedWiz instance 01. Link to comment Share on other sites More sharing options...
outhere Posted September 29, 2018 Share Posted September 29, 2018 How are you manually starting DOF ? - In your GlobalConfig_B2SServer.xml Change this line <LogFilePattern>.\DirectOutput.log</LogFilePattern> TO <LogFilePattern>C:\DirectOutput\DirectOutput.log</LogFilePattern> Then try this again Let's try this do a fresh boot of the computer and then go to the VP editor Load the game and start the game then close it, then post the log... Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 Something is definitely amiss. I restarted my PC again and did the exact same thing and this is the log now. Main difference is that the first time I restarted, my LED strip was not lit and no COM port was showing in Devices and Printers. In the second test/restart, I unplugged the Teensy and replugged it back in. It immediately lit up and shows COM6. Here is the second log file. Any ideas. I'm wondering if there is a COM port issue with my Jeb Plunger or something else??? DirectOutput Version 3.1.6656.21457, built 2018.03.23 11:55 MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput 2018.09.29 10:47:02.249 DirectOutput Logger initialized 2018.09.29 10:47:02.160 Pre-loading DLL Ciloci.Flee.dll from C:\DirectOutput\Ciloci.Flee.dll : ok 2018.09.29 10:47:02.162 Pre-loading DLL Extensions.dll from C:\DirectOutput\Extensions.dll : ok 2018.09.29 10:47:02.163 Pre-loading DLL FTD2XX32.dll from C:\DirectOutput\FTD2XX32.dll : ok 2018.09.29 10:47:02.163 Pre-loading DLL Newtonsoft.Json.dll from C:\DirectOutput\Newtonsoft.Json.dll : ok 2018.09.29 10:47:02.164 Pre-loading DLL PacDrive32.dll from C:\DirectOutput\PacDrive32.dll : ok 2018.09.29 10:47:02.164 Pre-loading DLL Q42.HueApi.ColorConverters.dll from C:\DirectOutput\Q42.HueApi.ColorConverters.dll : ok 2018.09.29 10:47:02.165 Pre-loading DLL Q42.HueApi.dll from C:\DirectOutput\Q42.HueApi.dll : ok 2018.09.29 10:47:02.233 Finishing framework 2018.09.29 10:47:02.234 Finishing cabinet 2018.09.29 10:47:02.234 Debug: Finishing output controllers 2018.09.29 10:47:02.234 Debug: Output controllers finished 2018.09.29 10:47:02.234 Cabinet finished 2018.09.29 10:47:02.234 DirectOutput framework finished. 2018.09.29 10:47:02.234 Bye and thanks for using! 2018.09.29 10:47:02.236 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml" 2018.09.29 10:47:02.249 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml 2018.09.29 10:47:02.249 Loading Pinball parts 2018.09.29 10:47:02.249 Loading cabinet 2018.09.29 10:47:02.250 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml 2018.09.29 10:47:02.320 1 output controller defnitions and 3 toy definitions loaded from cabinet config. 2018.09.29 10:47:02.320 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig. 2018.09.29 10:47:02.321 Cabinet auto configuration started 2018.09.29 10:47:02.344 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log) 2018.09.29 10:47:02.351 Opening 32-bit LedWiz driver... 2018.09.29 10:47:02.351 Detected and added LedWiz Nr. 1 with name LedWiz 01 2018.09.29 10:47:02.352 Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1 2018.09.29 10:47:02.354 Cabinet auto configuration finished 2018.09.29 10:47:02.354 Autoconfig complete. 2018.09.29 10:47:02.354 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml 2018.09.29 10:47:02.354 Cabinet loaded 2018.09.29 10:47:02.354 Loading table config 2018.09.29 10:47:02.354 No TableFilename specified, will use empty tableconfig 2018.09.29 10:47:02.354 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx 2018.09.29 10:47:02.355 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini 2018.09.29 10:47:02.359 Min DOF Version is 0.8 for file directoutputconfig.ini 2018.09.29 10:47:02.617 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini 2018.09.29 10:47:02.619 Min DOF Version is 0.8 for file directoutputconfig30.ini 2018.09.29 10:47:02.848 2 directoutputconfig.ini or ledcontrol.ini files loaded. 2018.09.29 10:47:02.849 Config for RomName doflinx exists in LedControl data. Updating cabinet and config. 2018.09.29 10:47:02.865 Table config loading finished: romname=doflinx, tablename=doflinx 2018.09.29 10:47:02.866 Pinball parts loaded 2018.09.29 10:47:02.866 Starting processes 2018.09.29 10:47:02.866 Initializing cabinet 2018.09.29 10:47:02.866 Debug: Initializing output controllers 2018.09.29 10:47:02.868 TeensyStripController LedStripController intialized and updater thread started. 2018.09.29 10:47:02.868 Debug: Initializing LedWiz Nr. 01 2018.09.29 10:47:02.869 TeensyStripController LedStripController updater thread started. 2018.09.29 10:47:02.869 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.29 10:47:02.869 Debug: Output controllers initialized 2018.09.29 10:47:02.870 Updater thread for LedWiz 01 started. 2018.09.29 10:47:02.873 Cabinet initialized 2018.09.29 10:47:02.874 Loading shape definition file: C:\DirectOutput\config\DirectOutputShapes.xml 2018.09.29 10:47:02.906 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:47:02.906 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:47:02.906 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:47:02.906 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.29 10:47:02.906 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.29 10:47:02.906 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:64, Width:1, Height:8) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:72, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:51, Right:0, Bottom:62, Width:1, Height:12) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixPlasmaEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:100), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:71, Width:1, Height:72) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:25, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:18, Right:0, Bottom:36, Width:1, Height:19) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:50, W:100, H:25), Matrix(W:72, H:1), ResultArea(Left: 0, Top:36, Right:0, Bottom:54, Width:1, Height:19) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:50, Right:0, Bottom:61, Width:1, Height:12) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixFlickerEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:72, H:1), ResultArea(Left: 0, Top:61, Right:0, Bottom:71, Width:1, Height:11) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:50), Matrix(W:72, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:36, Width:1, Height:37) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:47:02.907 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:20), Matrix(W:72, H:1), ResultArea(Left: 0, Top:57, Right:0, Bottom:71, Width:1, Height:15) 2018.09.29 10:47:02.913 Framework initialized. 2018.09.29 10:47:02.913 Have fun! 2018.09.29 10:47:02.919 Initializing cabinet 2018.09.29 10:47:02.919 Debug: Initializing output controllers 2018.09.29 10:47:02.919 Debug: Output controllers initialized 2018.09.29 10:47:02.919 Cabinet initialized 2018.09.29 10:47:02.923 Opening 32-bit LedWiz driver... 2018.09.29 10:47:02.923 Debug: Initializing LedWiz Nr. 01 2018.09.29 10:47:02.923 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.29 10:47:02.923 Opening 32-bit LedWiz driver... 2018.09.29 10:47:03.377 EXCEPTION: TeensyStripController LedStripController updater thread could not connect to the controller. Thread will quit. 2018.09.29 10:47:03.377 EXCEPTION: Thread: TeensyStripController LedStripController updater thread 2018.09.29 10:47:03.377 EXCEPTION: Message: IOException --> The semaphore timeout period has expired. 2018.09.29 10:47:03.377 2018.09.29 10:47:03.377 2018.09.29 10:47:03.386 EXCEPTION: Stacktrace: at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str) 2018.09.29 10:47:03.386 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.EndWrite(IAsyncResult asyncResult) 2018.09.29 10:47:03.386 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.Write(Byte[] array, Int32 offset, Int32 count, Int32 timeout) 2018.09.29 10:47:03.386 EXCEPTION: Stacktrace: at System.IO.Ports.SerialPort.Write(Byte[] buffer, Int32 offset, Int32 count) 2018.09.29 10:47:03.386 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.AdressableLedStrip.TeensyStripController.ConnectToController() 2018.09.29 10:47:03.386 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.OutputControllerCompleteBase.UpdaterThreadDoIt() 2018.09.29 10:47:03.386 EXCEPTION: Targetsite: Void WinIOError(Int32, System.String) 2018.09.29 10:47:04.196 Debug: Disposing LedWiz instance 01. 2018.09.29 10:47:04.918 Finishing framework 2018.09.29 10:47:04.919 Finishing cabinet 2018.09.29 10:47:04.919 Debug: Finishing output controllers 2018.09.29 10:47:04.920 TeensyStripController LedStripController finished and updater thread stopped. 2018.09.29 10:47:04.920 Debug: Finishing LedWiz Nr. 01 2018.09.29 10:47:04.920 Updater thread for LedWiz 01 terminated. 2018.09.29 10:47:04.931 LedWiz Nr. 01 finished and updater thread stopped. 2018.09.29 10:47:04.931 Debug: Output controllers finished 2018.09.29 10:47:04.931 Cabinet finished 2018.09.29 10:47:04.931 DirectOutput framework finished. 2018.09.29 10:47:04.931 Bye and thanks for using! 2018.09.29 10:47:04.931 Initializing cabinet 2018.09.29 10:47:04.931 Debug: Initializing output controllers 2018.09.29 10:47:04.931 Debug: Output controllers initialized 2018.09.29 10:47:04.931 Cabinet initialized 2018.09.29 10:47:04.936 Opening 32-bit LedWiz driver... 2018.09.29 10:47:04.936 Debug: Initializing LedWiz Nr. 01 2018.09.29 10:47:04.936 LedWiz Nr. 01 initialized and updater thread initialized. 2018.09.29 10:47:04.936 Opening 32-bit LedWiz driver... 2018.09.29 10:47:04.936 Updater thread for LedWiz 01 started. 2018.09.29 10:47:05.202 Debug: Disposing LedWiz instance 01. 2018.09.29 10:47:07.202 Debug: Disposing LedWiz instance 01. Link to comment Share on other sites More sharing options...
outhere Posted September 29, 2018 Share Posted September 29, 2018 Try unplugging other things that might be using com port 6 or interfering with it... Also try using a different USB port.. This here still makes absolutely no sense Where it says doflinx That is The spot where the rom name for the game you are loading is supposed to be I have no idea why it's putting that in their 2018.09.28 11:05:51.405 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx - The only time your LED strips should be lit is during a game or sometimes a frontend lights him up Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 35 minutes ago, outhere said: How are you manually starting DOF ? - In your GlobalConfig_B2SServer.xml Change this line <LogFilePattern>.\DirectOutput.log</LogFilePattern> TO <LogFilePattern>C:\DirectOutput\DirectOutput.log</LogFilePattern> Then try this again Let's try this do a fresh boot of the computer and then go to the VP editor Load the game and start the game then close it, then post the log... I'm running C:\DirectOutput\DOFLinx.exe. Link to comment Share on other sites More sharing options...
outhere Posted September 29, 2018 Share Posted September 29, 2018 That is the wrong DOF for Visual Pinball Let get it working in vp 1st Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 11 minutes ago, outhere said: That is the wrong DOF for Visual Pinball Let get it working in vp 1st Well, some good news. I removed the usb device in devices and printers and reconnected. It is now working just fine with VP. Haven't tested with FX3 or FP but will do so now. Thanks for all your help. Will let you know if I run into more problems. Link to comment Share on other sites More sharing options...
CaptainYell0wJacket99 Posted September 29, 2018 Share Posted September 29, 2018 Did some further testing and VP, FX3 and FP are all working now I've rebooted several times and the teensy seems to be connecting to the port now. Other than removing the device in Devices & Printers, I can't think of anything else I've done to get it working. Thanks again, Outhere for your help. Much appreciated! Link to comment Share on other sites More sharing options...
outhere Posted September 30, 2018 Share Posted September 30, 2018 That's great glad to see it's working Link to comment Share on other sites More sharing options...
Content Provider zedrummer Posted December 23, 2018 Content Provider Share Posted December 23, 2018 Link to comment Share on other sites More sharing options...
adold Posted February 25, 2019 Share Posted February 25, 2019 So I register the the com port and it is successful. I then copy the dll into the plugins folder of pinball x. When i run the plugins manager it doesnt register the path and then gives me the error to make sure com port is registered... Any thoughts? Thanks Anthony Link to comment Share on other sites More sharing options...
BadBardo Posted August 21, 2021 Share Posted August 21, 2021 hello guys, first of all I want to thank you for your immense contribution, without you I wouldn't have even started building a cabinet. I have a request for you ...i installed pinup popper, 3 monitors, a plunger with the klz25 and everything works great. arrived at this point I would have the desire to install 2 led strips of 144 led on the right and left with an 8x32 led matrix. i haven't installed DOF yet, i have a teensy 3.2 with WS2811 card. I have already tried to install everything following above all the directives of mameinabox .. but I could not make anything work, except the LEDs that once the teensy 3.2 is programmed remain always on. I have serious problems both with the DOF that I think must be installed before the program that controls the teensy 3.2, and with the file cabinet. i am italian and i don't know anything about programming. someone willing, could you make me an xml file for the cabinet and one for the generalconfig? I would like to try the installation of the led strips for one last time Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now