sushko Posted April 15, 2015 Posted April 15, 2015 Hi I have One ledwiz and one sainsmart. I have directoutput working and ledwiz not the sainsmart. I don't have a cabinet xml and don't know how the make one. I go to the web sight with the config tool and it makes two ini files. I will attach the files and my DOF Log. I think I am running in legacy mode because it looks like it is running off the ini files. Thanks Rich directoutputconfig(4).zip
sushko Posted April 16, 2015 Author Posted April 16, 2015 Yes I did but when I reopen it never keeps the setting. It does make the log file so that part works
randr Posted April 16, 2015 Posted April 16, 2015 You have something set as blocked make sure all exe's are unblocked as well as all dll's. cabinet. xml should save. You save it in config folder
sushko Posted April 16, 2015 Author Posted April 16, 2015 I checked it out I don't have anything blocked. Should the program make the cabinet. xml ? If I put the ini files in config folder the ledwiz works but not the sainsmart. I am not sure about this but if you are using the ini files it puts in legacy mode. So if I had a cabinet. xml I would not need the ini files.
randr Posted April 16, 2015 Posted April 16, 2015 On dof site you add sainsmart...then you input manually your serial number of sainsmart in cabinet xml
sushko Posted April 16, 2015 Author Posted April 16, 2015 Ok two questions How do I get serial number and how do I make the cabinet xml also thank you for your help
randr Posted April 16, 2015 Posted April 16, 2015 Link to my support files. https://www.dropbox.com/sh/nd0ei4zyx0wips2/AADatlirTe0l4uUBgLNlrieMa?dl=0 Copy the cabinet xml into your config folder edit it to match your locations/serial number. Run files in find serial number folder to get your serial
sushko Posted April 16, 2015 Author Posted April 16, 2015 Yes Yes Yes got it up and running thank you so much for all your help.
sushko Posted April 16, 2015 Author Posted April 16, 2015 It was the serial number in the cabinet.xml Thanks again now i can get some sleep. Good Night
sushko Posted April 27, 2015 Author Posted April 27, 2015 Okay moving forward I want to add two more sainsmart relay boards to the set up. Do I just copy paste the sainsmart part 2x from the cabinet xml and add the serial numbers.
sushko Posted April 29, 2015 Author Posted April 29, 2015 Hi is there anyone who can help me get three sainsmart and led wiz working. I can only get one sainsmart working if I change the serial number with the first one the other controler works it must be my cabinet.xml. Thanks Rich
Recommended Posts
Archived
This topic is now archived and is closed to further replies.