Jump to content
DOF Config Tool v3.0 is now live for all users! ×

Harley Davidson_v1.1_pm5_dt.zip

coolball

By coolball
in Desktop - Table Patches

Recommended Posts

coolball

coolball

Posted
Posted

index.php?app=downloads&module=display&section=screenshot&id=3185

File Name: Harley Davidson_v1.1_PM5_DT.zip

File Submitter: coolball

File Submitted: 13 Jan 2015

File Category: VPU Patching System - Table Modifications (DT)

Original Table Author: Edizzle

Original Table Version: Harley Davidson (Sega) (1999)(Edizzle)(V1.1)(FS)(PM5).vpt

Original Table Download:

Desktop Patch for Harley Davidson (Sega) (1999)(Edizzle)(V1.1)(FS)(PM5).vpt by Edizzle (coolball for the Desktop-Patch)

Thank you Edizzle for this nice table and the permission to mod.

Changes i´ve done

- added new Backdrop

- change the values to create a desktop version

- adjusts the flashers

Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod

http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/

Download the original Table: "Harley Davidson (Sega) (1999)(Edizzle)(V1.1)(FS)(PM5).vpt" / http://vpuniverse.com/forums/files/file/3183-harley-davidson-sega-1999edizzlev11fspm5/

Use the Mod: "Harley Davidson_v1.1_PM5_DT.dif"

Have fun

To Apply a patch:

a. If you do not already have the table that the patch was created for; you will need to download that file.

Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.

b. Make sure that you are on the "Apply Patch" tab located at the top of the window.

c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.

d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.

e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.

f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.

If you have made any changes to the original table release then this patch will not work.

Click here to download this file

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

About VPUniverse

VPUniverse is a site dedicated to digital pinball simulations and anything pinball in general. Our primary focus is on Digital Pinball formats including Visual Pinball, Future Pinball, and many more pinball simulators. All content is provided on this site for free to all registered members.

Subscriptions are available that allow additional perks; such as reduced download timers and increased download speeds.

Digital Pinball Network - Beware of frauds!

DPNetwork is a network of sites that are fully supported by the Virtual Pinball Community. Support those people who create the content and download ONLY from the following sites. The people that create the content for this hobby post only on the following sites. Any site not listed here; is NOT a vetted site. Always know what you are downloading and from where you are downloading from.

Trusted Sites:

Site Content & Disclaimer

All of the content on this site is created by our community members. All content on this site are done in tribute to the original creations. Because our community members upload this content for free use; does not give ANYONE permission to re-host files, re-distribute, package, or sell any cabinets or drives with community created content.

By downloading from this site; you agree to not re-host community content, package or re-distribute in any form the content from this site. If you are caught; your membership on VPUniverse.com will be banned without refund.

Contact

VPUniverse Discord

×
×
  • Create New...