Jump to content

Road Kings (Williams 1986) V1.0 Dt Wsvp99X


Stevoz

Recommended Posts

index.php?app=downloads&module=display&section=screenshot&id=3082

File Name: Road Kings (Williams 1986) v1.0 DT WSVP99x

File Submitter: Stevoz

File Submitted: 22 Nov 2014

File Category: VPU Patching System - Table Modifications (DT)

Original Table Author: sliderpoint

Original Table Version: Road Kings (Williams 1986) SPv1 FS VP99x PM5 1

Original Table Download:

Thank you sliderpoint for the funtastic table and the permission to mod your table.

Thank you freneticamnesic for fixing a transparency issue with the left rail image.

Changes I have done.

- added new Backdrop

- changed the values to create a desktop version

- adjusted rails and side walls

Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod.

http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/

Download the original Table: Road Kings (Williams 1986) SPv1 FS VP99x PM5 1 @ http://vpuniverse.com/forums/files/file/3054-road-kings-williams-1986-spv1-fs-vp99x-pm5/

This is the VP9.9x mod use this file as the Original Table

Road Kings (Williams 1986) SPv1 FS VP99x.vpt

To Apply a patch:

a. If you do not already have the table that the patch was created for; you will need to download that file.

Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on.

b. Make sure that you are on the "Apply Patch" tab located at the top of the window.

c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for.

d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table.

e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt.

f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe.

If you have made any changes to the original table release then this patch will not work.

Click here to download this file

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
  • Create New...