chernandez Posted August 1, 2014 Posted August 1, 2014 just setup my cab and installed dof2 for 1st time dof is running on tables my strobes, contactors, shaker are working and running smooth but my 5 rgb are not lighting up So if someone can tell what im doing wrong Ive got my ini from dof config tool and it wont pass the ledcontrol tester heres some of it didnt know how to copy whole thing or save a log of it Warning: Cant parse the part CE131 of the ledcontrol table config setting CE131 Orange. EXCEPTION: Could not parse setting CE131 Orange in column data E103 CPurple/E112 CGreen Blink 400 f200/ CE131 Orange. Warning: Previous exceptions occured in the line dipsydoodle,0,0,0,0,E104/E107/E108/E110/E119/E127,E114,E101,E105/E106/E109/E111/E120/E130,E113,E102/E115,E103/E112/E116/E117/E118/E128/E129/E131,E103/E112/E116/E117/E118/E128/E129/E131,E132,E115 300/E132 300,0,0,E104 CYellow/E108 CCyan/E110 CCyan/E113 CCyan/E119 CYellow Blink 400 f200/E125 CWhite/E127 CWhite,E107 CGreen/E108 CLime/E110 CLime/E113 CLime/E121 CWhite/E123 CWhite/E128 CWhite,E103 CPurple/E112 CGreen Blink 400 f200/ CE131 Orange,E105 CGreen/E109 CCyan/E111 CCyan/E114 CCyan/E126 CWhite/E130 CWhite,E106 CYellow/E109 CLime/E111 CLime/E114 CLime/E122 CWhite/E124 CWhite/E129 CWhite,0 of the ledcontrol file
Content Provider arngrim Posted August 1, 2014 Content Provider Posted August 1, 2014 it is fixed, please confirm
chernandez Posted August 1, 2014 Author Posted August 1, 2014 No didnt work or its now on red i attached my directoutputconfig.ini directoutputconfig (6).zip
Content Provider arngrim Posted August 1, 2014 Content Provider Posted August 1, 2014 i see better with the logs like you sent earlier
Content Provider arngrim Posted August 1, 2014 Content Provider Posted August 1, 2014 how you setup your configtool parameters will never work below putting 00 will disable the flasher intensity, they won't lit, let it to FF for full brightness or low down the value until 01, but not 00. i should put the lower value to 01 in the tool, will be fixed at some point
connorsdad Posted August 3, 2014 Posted August 3, 2014 how you setup your configtool parameters will never work below putting 00 will disable the flasher intensity, they won't lit, let it to FF for full brightness or low down the value until 01, but not 00. i should put the lower value to 01 in the tool, will be fixed at some point This caught me out too, is that the default setting? maybe it would be a good idea to default it to FF ?
Content Provider arngrim Posted August 3, 2014 Content Provider Posted August 3, 2014 default is FF or it is an error, will check tonight
Content Provider arngrim Posted August 4, 2014 Content Provider Posted August 4, 2014 i created a test account and default is FF, so it's ok by default
connorsdad Posted August 4, 2014 Posted August 4, 2014 I don't remember changing it to 00, then again I tried so many things to get my setup working with DOF I could have changed it.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.