DOF R3++ detects Pinscape Pico but no outputs are triggered (Windows 10, VPX 10.8 x64)

[repulp565]

Hi everyone,

I'm trying to get DOF R3++ working with a Pinscape Pico and I'm out of ideas.

 

My setup

Windows 10

Visual Pinball X 10.8 x64

B2S Server x64 (latest)

DirectOutput Framework R3++

Pinscape Pico (latest firmware)

 

Hardware

I have two MOSFET outputs connected to the Pinscape Pico:

Output #1 = Shaker

Output #2 = Gear motor

Both outputs work perfectly when tested from the Pinscape Pico Config Tool, so the hardware and wiring are confirmed working.

 

DOF Config Tool

In the DOF Config Tool I assigned:

P001 = Shaker

P002 = Gear

Generated the configuration and copied all generated files to:

C:\DirectOutput\Config

What happens

DOF starts correctly.

The DirectOutput log shows:

Pinscape Pico initialized

Output controllers initialized

Cabinet initialized

Framework initialized

"Have fun! :)"

 

No initialization errors are reported.

However, no outputs are ever activated during gameplay.

I also tried the DirectOutput test/monitor, and no toys appear there either.

 

Important

I am not using a custom Cabinet.xml. From what I understand, a simple Pinscape Pico setup with standard outputs should not require one.

Tables tested

I tested several ROM tables (Apollo 13, Cactus Canyon, Leprechaun King, etc.) with the same result.

Question

 

Has anyone successfully used Pinscape Pico with DOF R3++?

 

Is there any additional configuration required for Pinscape Pico that differs from the original KL25Z Pinscape?

Could this be related to VPX x64 or the latest B2S Server?

 

Any help would be greatly appreciated.

Thanks!

Cabinet.xml directoutputconfig51.ini GlobalConfig.xml GlobalConfig_B2SServer.xml DirectOutput.log

Edited 15 hours ago by repulp565