coolball Posted July 7, 2014 Share Posted July 7, 2014 File Name: 24_v1.12_DT.zip File Submitter: coolball File Submitted: 07 Jul 2014 File Category: VPU Patching System - Table Modifications (DT) Original Table Author: freneticamnesicOriginal Table Version: 24 (Stern)(2009)(freneticamnesic)(FS)(VP990) 1.12 Original Table Download: Desktop Patch for 24 (Stern)(2009)(freneticamnesic)(FS)(VP990) 1.12 by freneticamnesic (coolball for the Desktop-Patch) Thank you freneticamnesic for the fantastic table and the permission to mod your table. Changes i´ve done - added new Backdrop - change the values to create a desktop version - adjusts the flashers Download and use the VPU Patching System - VPPatch - 32bit & 64bit 1.02 to create the Mod http://vpuniverse.com/forums/files/file/2581-vpu-patching-system-vppatch-32bit-64bit/ Download the original Table: "24 (Stern 2009) freneticamnesic v1.12.rar" / http://vpuniverse.com/forums/files/file/2876-24-stern2009freneticamnesicfsvp990/ Use the Mod: "24_v1.12_DT.dif" Have fun To Apply a patch: a. If you do not already have the table that the patch was created for; you will need to download that file. Read the "ReadMe.txt" file that comes with the patch download. The file should contain a link to the original file that the patch is based on. b. Make sure that you are on the "Apply Patch" tab located at the top of the window. c. Under "Original Table (Unmodified)". Click on "Choose" and then select the Original Unmodified Table that the patch was created for. d. Under "New Table Patch" click on "Choose" and select the patch file (.dif) that you want to apply to the table. e. Under "New Table File Name". Type in the name that you want to call your new table. Make sure that the file name ends in .vpt. f. Click "Apply Patch" - You will get a pop-up window indicating the location where your new file was created. This should be in the "mods" folder located in the same folder as the VPPatchXX.exe. If you have made any changes to the original table release then this patch will not work. Click here to download this file Link to comment Share on other sites More sharing options...
Content Provider freneticamnesic Posted July 7, 2014 Content Provider Share Posted July 7, 2014 Very cool, I just noticed how high up I managed to place the gate on the left ramp from this angle. Whoops! Link to comment Share on other sites More sharing options...
coolball Posted July 7, 2014 Author Share Posted July 7, 2014 Oh yes, now I see it too. The gate is ready for takeoff Link to comment Share on other sites More sharing options...
coolball Posted July 7, 2014 Author Share Posted July 7, 2014 OK, the gate is on the way back to earth. Link to comment Share on other sites More sharing options...
Content Provider Rascal Posted July 7, 2014 Content Provider Share Posted July 7, 2014 Ok, now I see why the rotten orange slices looked like they were real low, there was plastics hiding the bumper bodys. You see, there is more depth in Desktop versions. Nice job coolballs. Now I'll just wait a little bit until all the bugs are chased out and I'll make a HV conversion of this baby. Link to comment Share on other sites More sharing options...
Content Provider freneticamnesic Posted July 7, 2014 Content Provider Share Posted July 7, 2014 bug 1: I have been made aware (because I'm blind/cannot read) that the apron says INSTALT INFO......oooPLAYER1ooo made a passing reference to this recently and I had no idea what he was talking about. Shadowsclassic send me a message about it and I finally saw it... It's an image change, I think anyone can do, just go to the image manager for this table and find Apron and "Reimport From" and choose this image: https://app.box.com/s/ojvsqx481nrw2s1gz06z Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.