pin2dmd 192x64 activation problem

[colditz]

Hi everyone , i have a problem with a pin2dmd .

is it normal that when i switch it on the only file appear on the sd is the .dat?

i remember 128x32 produce a file named with the serial code 

[lucky1]

If it is not already activated it should be like this.

[colditz]

excuse me lucky , usually when i switch on a not activated 128x32 i found a file named E244514544354 or similar , that is the uid of the display , i can use that to require activation without mounting led panel ( for example because not still delivered from china)

[lucky1]

I just checked with my spare board and it worked exactly as expected. It generated a file with the UID as name. 

For XL it is X244514544354 or similar.
Maybe your board is not working. Does the red LED turn on when no SD card is inserted and the board is powered up ?

[colditz]

sì, senza sd il led rosso si accende,    con sd il led non si accende

 

sembra corretto ma non c'è il file generato con xl3522346466 

 

forse qualcosa non funziona ma non riesco a capire cosa

 

anche il display precedente acquistato da pinballcenter aveva problemi (il lettore SD non funzionava) ma ho risolto usando lo strumento pin2dmd e l'attivazione dal PC

[colditz]

yes, without sd the red led lights up,

with sd the led doesn't light up

it seems correct but there is no file generated with xl3522346466 maybe something is not working but I can't figure out what even the previous display purchased from pinballcenter had problems (the SD reader didn't work) but I solved it using the pin2dmd tool and activation from the PC

[lucky1]

You can also get the UID by using the pc tool.