Popper new install: lots of questions

[Stuart]

I just updated my virtual pinball to a 4K 120hz LG screen and updated the computer to a 4090 graphic card. Asus Z790-E motherboard.  PinOne controller from Cleavland Software. Added SSF as well.

https://www.vpforums.org/index.php?showtopic=56491

 

Originally built in 2015 and used Pinball X as a front end.  

This time I decided to try Pinup Popper.

New install of windows 11

Baller installer used.

VPX games seem to work fine.

The included retroflair game will not get past starting playfield screen from Future pinball.  The loading bar does not move

 

starting pinup popper front end

I get the 2 included games but only the playfields show up no backglass or DMD while scrolling through the "wheel"

The wheel is an arc.  I thought that was an option and it should be straight across (no big deal it looks fine just checking)

 

If I select and play the leprechaun game it loads the backglass and DMD and plays fine.  Once I exit I get a stationary playfield screen usually the retroflair game and it does not change as you scroll through the wheel.

 

If I chose system exit the playfield remains on the screen and on moving the mouse I get an error window that says Pinup Display not responding.

 

If I try to run Retroflair from Pinup popper it does load and I get a playufield and baclklglass but buttons or keyboard do not start the game even though appropriate entries were made in future pinball.

 

Hopefully just some m,essed upo settings

 

Thanks,

Stuart