[New VP10 Alert] The Blizzard of Ozz

[lafester]

Strange how only some of us have the LUT error. 

[GraveD]

22 hours ago, lafester said:

Strange how only some of us have the LUT error. 

 

@lafester

I tried playing around with the script (I'm an amateur) and couldn't fix it. 
I'm guessing it's got something to do with the PupPack but well beyond my experience. 

It's a pity, as it was selected as a challenge table in a vpin competition I'm in and I can't even get it to load up....

 

[JimBeamer]

On 12/1/2025 at 7:26 PM, Runner said:

 

You need to use the vpinball64.exe otherwise the 32 bit version runs out of memory.  If you do this, you will also need the dmddevicePUP64.dll in your vpinmame folder if not already there.  Update your Baller install or manually update your player to 1.5 manually from this link https://www.nailbuster.com/wikipinup/doku.php?id=pinup_player_install.  This table requires pinupplayer 1.5 to run anyways so this will be a much needed upgrade.

 

Obviously, always backup the files you are replacing.

Thank you very much, that was the right tip. vpin64.exe wasn't working for me. Only after updating DirectX i was able to start vpin64 and the table ran perfectly. The table is brilliant, excellent work, thank you very much.

[GraveD]

On 12/2/2025 at 8:54 AM, GraveD said:

@ZandysArcade

I was playing around with this and can't get past these LUT errors. 
There's a couple of us here with same issue. 

@djbootleggah @jisoria

Any ideas?

@djbootleggah @jisoria

 

I got it working by commenting out line 539

 

 

[lafester]

On 11/29/2025 at 12:04 PM, Bigbadwolf4life said:

I'm having issues getting the table to coin up.

Same here, I had to use the keyboard. I would prefer to put it on free play if possible. 

 

Line 409 is for Freeplay

Edited December 5, 2025 by lafester

[Meshuggah]

I played for a few minutes after installing and get this error

[rkader]

Hello,

ver 1.0.2 of the table.

 

I just ended a game with 2 players . Both did enough points to write the initials. Then it asked a 3rd time to insert initials and:

Runtime error
-------------
Line: 3884
Description unavailable

Also, I can't turn the VRRoom off even if I save the ini as Vrroom Off and restart the table.
 

Edited December 11, 2025 by rkader

[AquaticPlayToy]

 

I'm getting this error running the latest version 1.03.  I can play the table for about a minute before this pops up.  Previous versions of table worked fine.  Is this happening to anyone else?

[georgedoors]

On 12/3/2025 at 9:38 PM, GraveD said:

@djbootleggah @jisoria

 

I got it working by commenting out line 539

 

 

as a newbie to visual pinball and sorry for sounding done but what does this 'commenting out' mean?

This previously worked for me but now since the update it gives the LUT error and does the same now with the older 1.02 version

[Cliffy]

Just now, georgedoors said:

as a newbie to visual pinball and sorry for sounding done but what does this 'commenting out' mean?

This previously worked for me but now since the update it gives the LUT error and does the same now with the older 1.02 version

an apostrophe (') comments out a line. 

[georgedoors]

12 minutes ago, Cliffy said:

an apostrophe (') comments out a line. 

thank you cliffy that worked

[DaCockyOne]

Hello i get an error line 11241 - Set ObjFile = ObjFso.OpenTextFile(pupPackScreenFile)

Any ideas on how to fix please?

[AquaticPlayToy]

 

I've did further troubleshooting on this error I'm receiving in 1.03a.  It only happens when there is more than 1 player.  I can play a complete game if only 1 player is selected, but if I play with 2 or more players I'll randomly get the provided error.  Last time it happened I nudged the table I don't believe I activated anything and this popped up.  Playing 1 player is an amazing experience and I thank you very much for this table.  Just wanted to provided some info.

[Xxkeithxx25]

Line 12511
Hello I have been getting this error when running the table. Any help would be appreciated. 

Edited December 21, 2025 by Xxkeithxx25

[Xxkeithxx25]

I was reading the above topic about it only giving that error on two player mode. I was thinking the same thing until I actually got the error twice in single player mode. 

[AquaticPlayToy]

Interesting.  I've been playing the 1.02 version as it seems to perform better.  Would really like a fix to this table because otherwise it's an amazing experience.  Much appreciation to the author for this original masterpiece.

[queequeg]

Table is great, and runs great...

 

...except for DOF?  My feedback devices aren't triggering for this table (and only this table), and I can't figure out why.  I've (of course) enabled plugins in the backglass settings, but no dice?

Has anybody encountered this before? Is there some other setting to enable plugins in the B2S settings?

[anthonyd]

 

All of a sudden, I am getting line 11241 Set ObjFile = ObjFso.OpenTextFile(pupPackScreenFile) error, anyone know how to fix.

[jrockrat]

On a 2 player game and the 2nd player constantly freezes up the table during the first ball. Maybe around 10-20 seconds of play or so. 
I get a Runtime Error "Line 1 Wrong number of arguments or invalid property assignment: 'PlayModeVideo'

This happens when launching from Popper and also just launching from VPX.

Using VPX 10.8.0 Final. 

Blizzard of Ozz version 1.0.3a

Any ideas on a fix? 

 

Note - Went back to 1.0.2 and 2 player works fine.
 

Edited December 28, 2025 by jrockrat
update with more info

[rbarr110]

I have the table installed and running.  Table looks great. However I get no ball after "adding coin".  Plunger is working. All my other installed tables run fine.  Any suggestions?

 

UPDATE:  After a re-install it works fine now.

Edited December 29, 2025 by rbarr110

[manu85]

 

 

Hello, I installed the table with the pupDmd but I have no scores or any information about the DMD. Can you tell me why? Thank you for your help and sorry for my English.

 

 

[Lump2085]

 I can only download the first folder the other 2 are bloc comes up error bloc for some reason?

I still have 17 files available under my log in ??

[Quick420]

I get it to run, mr crowly playing can add coins but as soon as I hit the 1 key I get the windows ding sound and it locks up. Sorry to be abother but I'm a noob to this program and am learning as fast as I can, thanks for any help I may receive. I got H-House to work well and Leprachaun works well as well as MS-Frankenstein, no luck with Blizzard Of Ozz yet.

[Wojima]

Is there a way to turn up the in game music? The sounds and game speech is fine but I can barely hear the songs

[InKaTech]

Hello!

 

I'm relatively new to VPX again after a long break. Unfortunately, I'm having trouble getting this wonderful table to work. I have a dual-screen setup. I ran the corresponding batch file and put the music in the music folder. The PUP pack is in the correct “PinupSystem” folder. However, I only get the full-screen backglass displayed, without DMD or FullDMD. What am I doing wrong? Other tables (e.g., Hellraiser, Forest Gump, Minions) work fine. When I close the Ozzy table, I see the Full DMD flash briefly on the backglass, which I don't see before using Alt + Tab. Unfortunately, I always have headaches when installing PUP tables and would like to understand it completely. Hoping for help, many thanks to this fantastic group,

 

with best regards

Ingo