ActiveSQL PlayList not populating despite ActiveList working?

[clemon79]

Hi folks!

 

Got a weird one here: I am trying to set up PinballFX with Popper on my cabinet. I've been following the directions at https://www.nailbuster.com/wikipinup/doku.php?id=pinball_fx_stream, but when I get to the point where it's time to build the playlist, the playlist isn't building. The ActiveList, as you see in the screenshots attached, is populating fine, but the PlayList itself is not automatically adding those tables like it's supposed to be.

 

This SHOULD be working (it's practically identical to my FX3 setup) so I feel like "just turn off the ActiveSQL and add them by hand" isn't a good solution. Wat do?

 

Thanks for any help!

Edited September 2, 2025 by clemon79

[Krusheen]

Have you tried in Popper scrolling over to see if they are there but just don't appear like it.  I recently had a similar issue where when I would go into the Pinbal FX section in Popper it looked like there were no tables but when I used the buttons to navigate to the right it was selecting empty space. 

 

The issue in my instance was that the wheel images were missing.  The tables displaying in the ActiveList tab means they are in the playlist.