Backglass and DMD not showing with 10.8

[tigermaster]

Hallo, i have some tables that i've saved in 10.6 with "somewhat" working backglass and dmd.

They are NOT VR ROOMS i've just did little modifications to play them in VR

i'm not talking about B2S i mean standard internal backglass and internal DMD recall using textbox with "DMD"

 

if i launch my modded table (eg. 24 (Stern 2009)2.0.1 vpx5) with older visual pinball is all fine (even using the new pinmame folder from 10.8 installation)
if i try with 10.8, both x86 and x64 backglass image is gone along with DMD.

 

dmddevicelog is ok, it means it correctly loads the dmd, the problem is that the entire backglass is invisible so i don't see the dmd too.

what can i do ? i tried every possible combination of checkboxes, capture dmd, disbale b2s, capture backglass, etc.. with no luck.
I've read also on guthub there are some issues with backglass for not VR roooms, is it bugged then ?

vr rooms are ok, also pup works great, i have problems only with the standard visual pinball backglass from my custom saved tables.

 

do you have any clue ? thank you.

 

[tigermaster]

for anyone interested you have to use a flasher now with the "use script DMD" checkbox enabled, the old fashion textbox no longer works.
same for backglass i guess everything must be converted to primitives backglass view is completely ignored.