legs

[Martafix]

Hi,

I'm going to build my first vpincab and I'm looking for cabinet plans. I want to use a LG oled 42'' or 48'' TV so I'm trying to design in sketchup the plans.

One question if anyone can help me: I saw many palns and I havent understand the height from the bottom for the bolts of the legs: I've seen that sometimes front and rear legs are at the same height, but other times front and rear are at different height. Can anyone tell me where the holes to fix the legs must be done?

Thanks

[gtxjoe]

On modern pins, the legs are offset. In front the legs go up 9” from the bottom. 7” in the back.  The easy way to do this is using the inside leg brackets. In front, rest the inside bracket on the bottom of the cabinet with the bolt holes up. In the back, flip the bracket so holes are closer to the bottom of the cab

[Martafix]

On 4/8/2025 at 12:35 AM, gtxjoe said:

On modern pins, the legs are offset. In front the legs go up 9” from the bottom. 7” in the back.  The easy way to do this is using the inside leg brackets. In front, rest the inside bracket on the bottom of the cabinet with the bolt holes up. In the back, flip the bracket so holes are closer to the bottom of the cab

Thanks for the answer...Is there any reason why they are offset?

[Martafix]

2 minutes ago, Martafix said:

Thanks for the answer...Is there any reason why they are offset?

Sorry, I write another post, I don't find where to edit the previous!

Is it better the new way with offset or the old with legs at the same hight (what was the height from the bottom for all 4 legs?) And in the two ways what must be the inclination of the playfield monitor?

Thanks