DOF Addressable LED issues *Solved*

[gtm87]

***Solved***  My existing cab config was a different port on the old PC. Updated it to the correct port, regenerated a file and back in business.

 

 

Hello, I recently upgraded my pincab to a new PC running windows 11 and I am stuck with getting my addressable LEDS to work. My toys (contactors) and my RGB button lights which are running off a PACLED board are working fine.  I am running DOF Current version: 5 November 2024 (v3.2 Beta 3)  

 

My addressable LEDs are on a Wimos and Pinmos board.  When flashing the board, or turning on my PC, my addressable LEDS do light up so I know they are functional.  I did load my cab file into the Arnoz tool.

 

I followed the MRJ install and additional steps for addressable lights, and then troubleshooting steps.

Confirmed DOF is active in B2s, etc.  

 

I enabled a log, and have attached it.  If someone could point me in the right direction that would be great.  Thank You!

DirectOutput.log

Edited January 5, 2025 by gtm87