DOF - few non-rom tables not working

[tvel44]

Hello! I really hope someone can steer me in the right direction-- been tearing my hair out trying to figure this one out...

All my tables load my leds and solenoids/toys except a few select non-ROM games: Die Hard, Stranger Things, MF DOOM, Harry Potter--- I could have sworn these worked in the past. 
Can't for the life of me figure out why now these aren't loading any dof functions.  The tables load fine otherwise-- puppacks and everything else-- just no DOF.

If there something I might be forgetting to do to get these particular tables to work? Any suggestions or ideas?

[tvel44]

This has been solved. A user named classicradios suggested going into the registry and and making sure that ForceDisableB2s was set to 0 and not 1... so I went right ahead and did that-- and EUREKA-- all the tables that didn't have dof before, loaded up perfectly! Hope this might help someone that's facing that same issue. 

[sseiter67]

This is why I love this community. I was having the same problem and was really thinking it was my dof config settings that causing my issues but I couldn't figure out what would cause it. After a little searching on this topic I find this post and yes it also solved my issue. Thanks to all those who support and provide their experiences to this hobby to help us enjoy it

[Nosfay]

Hi, I'm having trouble to use DOF on non-rom based tables aswell.

 

DOF works greats on 32b and 64b tables.

I've searched for "ForceDisableB2s" in registry, it's already at 0. I've set it to 1, same behavior.

 

As en example, here is my log for Futurama table from VPW:

 

---------------------------------------------------------------------------------
DirectOutput Framework - Version 3.2.9219.33016, x64-Release, built 2025.03.29 18:20
DOF created by SwissLizard / MIT License
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, Vroonsh, CSD, and Freezy
https://github.com/mjrgh/DirectOutput
2025.10.27 19:39:40.333	DirectOutput logger initialized
2025.10.27 19:39:40.300	Install folder lookup: assembly: C:\DIRECTOUTPUT\X64\DIRECTOUTPUT.dll, install folder: C:\DIRECTOUTPUT\X64 (ASSEMBLY folder -> original flat install configuration)
2025.10.27 19:39:40.301	Global config file lookup: found in Config folder: C:\DIRECTOUTPUT\X64\Config\GlobalConfig_B2SServer.xml
2025.10.27 19:39:40.305	Loading global configuration from C:\DIRECTOUTPUT\X64\Config\GlobalConfig_B2SServer.xml
2025.10.27 19:39:40.329	Global config successfully loaded from C:\DIRECTOUTPUT\X64\Config\GlobalConfig_B2SServer.xml
2025.10.27 19:39:40.331	Substitution variables: {DllDir}=C:\DIRECTOUTPUT\X64; {InstallDir}=C:\DIRECTOUTPUT\X64; {BinDir}=C:\DIRECTOUTPUT\X64; {TableDir}=C:\Visual Pinball\Tables; {TableName}=Futurama (Original 2024); {RomName}=futurama
2025.10.27 19:39:40.333	Loading Pinball parts
2025.10.27 19:39:40.333	Loading cabinet
2025.10.27 19:39:40.334	Warning: No cabinet config file loaded. Will use AutoConfig.
2025.10.27 19:39:40.334	Cabinet auto configuration started
2025.10.27 19:39:40.462	Detected and added Pinscape Controller (KL25Z) #1 with name Pinscape Controller 01
2025.10.27 19:39:40.463	Added LedWizEquivalent #51 with name Pinscape Controller 01 Equivalent for Pinscape Controller (KL25Z) #1, 5 output ports
2025.10.27 19:39:40.669	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2025.10.27 19:39:40.728	Cabinet auto configuration finished
2025.10.27 19:39:40.728	Cabinet loaded
2025.10.27 19:39:40.728	Loading table config
2025.10.27 19:39:40.728	Warning: No table config file found. Will try to load config from LedControl file(s).
2025.10.27 19:39:40.728	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName futurama
2025.10.27 19:39:40.731	Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig51.ini
2025.10.27 19:39:40.736	Min DOF Version is 0.8 for file directoutputconfig51.ini
2025.10.27 19:39:40.736	Resolving Tables Variables (C:\Visual Pinball\Tables\directoutputconfig51.ini)
2025.10.27 19:39:40.738	Resolving Global Variables (C:\Visual Pinball\Tables\directoutputconfig51.ini)
2025.10.27 19:39:40.892	1 directoutputconfig.ini or ledcontrol.ini files loaded.
2025.10.27 19:39:40.895	No config for table found in LedControl data for RomName futurama.
2025.10.27 19:39:40.895	Table config loading finished: romname=futurama, tablename=Futurama (Original 2024)
2025.10.27 19:39:40.896	Pinball parts loaded
2025.10.27 19:39:40.897	Starting processes
2025.10.27 19:39:40.897	Initializing cabinet
2025.10.27 19:39:40.897	Initializing output controllers
2025.10.27 19:39:40.898	Pinscape "Pinscape Controller 01" initialized and updater thread started.
2025.10.27 19:39:40.898	Output controllers initialized
2025.10.27 19:39:40.900	Cabinet initialized
2025.10.27 19:39:40.900	Pinscape "Pinscape Controller 01" updater thread started.
2025.10.27 19:39:40.900	Pinscape "Pinscape Controller 01" updater thread has connected to Pinscape "Pinscape Controller 01".
2025.10.27 19:39:40.903	Searching for DirectOutputShapes.xml in .ini file location (C:\DIRECTOUTPUT\X64\Config): Success
2025.10.27 19:39:40.903	Loading shape definition file: C:\DIRECTOUTPUT\X64\Config\DirectOutputShapes.xml
2025.10.27 19:39:40.956	Framework initialized.
2025.10.27 19:39:40.956	Have fun! :)
2025.10.27 19:39:53.865	Finishing framework
2025.10.27 19:39:53.866	Finishing cabinet
2025.10.27 19:39:53.867	Finishing output controllers
2025.10.27 19:39:53.868	Pinscape "Pinscape Controller 01" updater thread has disconnected from Pinscape "Pinscape Controller 01" and will terminate.
2025.10.27 19:39:53.869	Pinscape "Pinscape Controller 01" finished and updater thread stopped.
2025.10.27 19:39:53.869	Output controllers finished
2025.10.27 19:39:53.869	Cabinet finished
2025.10.27 19:39:53.869	DirectOutput framework finished.
2025.10.27 19:39:53.869	Bye and thanks for using!

 

It seems it doesn't find "futurama" config, but my configs files are up to date and I find futurama in it:

 

futurama,ON,ON,E120 BLINK 700 F200,E118|E121 BLINK 700 F200,E122|E131 500 I5

 

 

Any help is welcome !