Jump to content

DOF not working. Posting Log.

Retromatic

By Retromatic
in Visual Pinball Support

 Share

Recommended Posts

Retromatic

Retromatic

Posted
Posted

I feel like I have followed the directions for installing DOF but it is not communicating with my pin one board.

 

Right now I'm just trying to get the solenoids firing. They fire through the CSD config tool so I know they are working.

 

DOF is loading into B2S fine.

Not sure of the issues from there.....I'm sure it's probably something simple.

 

DirectOutput Version 3.1.7776.42172, built 2021.04.16 23:25
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2024.07.19 20:34:40.760    DirectOutput Logger initialized
2024.07.19 20:34:40.728    Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"
2024.07.19 20:34:40.760    Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2024.07.19 20:34:40.760    Loading Pinball parts
2024.07.19 20:34:40.760    Loading cabinet
2024.07.19 20:34:40.761    Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2024.07.19 20:34:40.796    0 output controller defnitions and 0 toy definitions loaded from cabinet config.
2024.07.19 20:34:40.796    Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2024.07.19 20:34:40.797    Cabinet auto configuration started
2024.07.19 20:34:40.816    PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2024.07.19 20:34:40.822    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.823    LedWiz-like device at VID=3727, PID=37383, product string=Clev Soft PinOne, manufacturer string=0x0e8f
2024.07.19 20:34:40.824    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.825    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.825    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.826    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.827    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.828    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.829    LedWiz-like device at VID=3727, PID=37383, product string=Clev Soft PinOne, manufacturer string=0x0e8f
2024.07.19 20:34:40.830    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.831    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.832    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.832    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.833    LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2024.07.19 20:34:40.838    Cabinet auto configuration finished
2024.07.19 20:34:40.838    Autoconfig complete.
2024.07.19 20:34:40.838    Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml
2024.07.19 20:34:40.838    Cabinet loaded
2024.07.19 20:34:40.838    Loading table config
2024.07.19 20:34:40.839    Warning: No table config file found. Will try to load config from LedControl file(s).
2024.07.19 20:34:40.839    Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName trek_201
2024.07.19 20:34:40.841    Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig11.ini
2024.07.19 20:34:40.850    Min DOF Version is 0.8 for file directoutputconfig11.ini
2024.07.19 20:34:40.850    Resolving Tables Variables
2024.07.19 20:34:40.851    Resolving Global Variables
2024.07.19 20:34:41.003    Failed: AMBER
2024.07.19 20:34:41.003    Warning: Cant parse the trigger part AMBER of the ledcontrol table config setting Amber Blink fu500 fd550.
2024.07.19 20:34:41.004    EXCEPTION: Could not parse setting Amber Blink fu500 fd550 in column data Amber Blink fu500 fd550.
2024.07.19 20:34:41.004    EXCEPTION: Thread: 
2024.07.19 20:34:41.004    EXCEPTION: Message: Exception --> Cant parse the part AMBER of the ledcontrol table config setting Amber Blink fu500 fd550.
2024.07.19 20:34:41.006    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2024.07.19 20:34:41.006    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2024.07.19 20:34:41.006    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2024.07.19 20:34:41.006    EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2024.07.19 20:34:41.007    Warning: Previous exceptions occured in the line bigtown,S48,E103,W13|W15|W16 60 I48,E105,0,S46,0,S37,W14|W17|W18 60 I48,W18|S17 60 I48,0,E445 m200,S8 I60,0,0,0,0,0,0,0,0,0,0,0,0,ON,Amber Blink fu500 fd550,Blink fu500 fd600,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 of the ledcontrol file
2024.07.19 20:34:41.286    Failed: STEEL_BLUE
2024.07.19 20:34:41.286    Warning: Cant parse the trigger part STEEL_BLUE of the ledcontrol table config setting Steel_blue Blink fu500 fd550.
2024.07.19 20:34:41.287    EXCEPTION: Could not parse setting Steel_blue Blink fu500 fd550 in column data Steel_blue Blink fu500 fd550.
2024.07.19 20:34:41.287    EXCEPTION: Thread: 
2024.07.19 20:34:41.287    EXCEPTION: Message: Exception --> Cant parse the part STEEL_BLUE of the ledcontrol table config setting Steel_blue Blink fu500 fd550.
2024.07.19 20:34:41.287    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2024.07.19 20:34:41.287    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2024.07.19 20:34:41.287    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2024.07.19 20:34:41.287    EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2024.07.19 20:34:41.287    Warning: Previous exceptions occured in the line lastlap,S48,E103,W13|W15|W16 60 I48,E105,0,S46,E104,S37,W14|W17|W18 60 I48,W18|S17 60 I48,0,E445 m200,S8 I60,0,0,0,0,0,0,0,0,0,0,0,0,ON,Steel_blue Blink fu500 fd550,Blink fu500 fd600,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 of the ledcontrol file
2024.07.19 20:34:41.314    Failed: 117
2024.07.19 20:34:41.314    Warning: Cant parse the trigger part 117 of the ledcontrol table config setting 117.
2024.07.19 20:34:41.314    EXCEPTION: Could not parse setting 117 in column data E104/117.
2024.07.19 20:34:41.315    EXCEPTION: Thread: 
2024.07.19 20:34:41.315    EXCEPTION: Message: Exception --> Cant parse the part 117 of the ledcontrol table config setting 117.
2024.07.19 20:34:41.315    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2024.07.19 20:34:41.315    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2024.07.19 20:34:41.315    EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2024.07.19 20:34:41.315    EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2024.07.19 20:34:41.315    Warning: Previous exceptions occured in the line men_in_black,E101,E103,E119,0,0,E102/E123,E104/117,E107,E109,E110,0,E108 I16/E124 I16/E136 I16,E122 I60,0,0,0,0,0,0,0,0,0,0,0,0,ON,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 of the ledcontrol file
2024.07.19 20:34:41.798    1 directoutputconfig.ini or ledcontrol.ini files loaded.
2024.07.19 20:34:41.801    Config for RomName trek_201 exists in LedControl data. Updating cabinet and config.
2024.07.19 20:34:41.811    Table config loading finished: romname=trek_201, tablename=Star Trek 25th Anniversary (Data East 1991)
2024.07.19 20:34:41.812    Pinball parts loaded
2024.07.19 20:34:41.812    Starting processes
2024.07.19 20:34:41.812    Initializing cabinet
2024.07.19 20:34:41.812    Debug: Initializing output controllers
2024.07.19 20:34:41.812    Debug: Output controllers initialized
2024.07.19 20:34:41.812    Cabinet initialized
2024.07.19 20:34:41.815    Loading shape definition file: C:\DIRECTOUTPUT\DirectOutputShapes.xml
2024.07.19 20:34:41.854    Framework initialized.
2024.07.19 20:34:41.855    Have fun! :)
2024.07.19 20:35:34.327    Finishing framework
2024.07.19 20:35:34.328    Finishing cabinet
2024.07.19 20:35:34.328    Debug: Finishing output controllers
2024.07.19 20:35:34.328    Debug: Output controllers finished
2024.07.19 20:35:34.328    Cabinet finished
2024.07.19 20:35:34.328    DirectOutput framework finished.
2024.07.19 20:35:34.328    Bye and thanks for using!
 

  • 4 months later...
LIP

LIP

Posted
Posted

Salut, pareil pour moi...

 

J'ai remarqué qu'il n' y avait pas de tirets _  dans le gamename du script alors qu'il y en a dans les fichiers DOF .  j'ai essayé de renommer dans les script et dans les fichiers DOF, en vain, ça ne fonctionne toujours pas. (chez moi, c'est la seule table sur 380 où le DOF ne fonctionne pas!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

About VPUniverse

VPUniverse is a site dedicated to digital pinball simulations and anything pinball in general. Our primary focus is on Digital Pinball formats including Visual Pinball, Future Pinball, and many more pinball simulators. All content is provided on this site for free to all registered members.

Subscriptions are available that allow additional perks; such as reduced download timers and increased download speeds.

Digital Pinball Network - Beware of frauds!

DPNetwork is a network of sites that are fully supported by the Virtual Pinball Community. Support those people who create the content and download ONLY from the following sites. The people that create the content for this hobby post only on the following sites. Any site not listed here; is NOT a vetted site. Always know what you are downloading and from where you are downloading from.

Trusted Sites:

Site Content & Disclaimer

All of the content on this site is created by our community members. All content on this site are done in tribute to the original creations. Because our community members upload this content for free use; does not give ANYONE permission to re-host files, re-distribute, package, or sell any cabinets or drives with community created content.

By downloading from this site; you agree to not re-host community content, package or re-distribute in any form the content from this site. If you are caught; your membership on VPUniverse.com will be banned without refund.

Contact

VPUniverse Discord

×
×
  • Create New...