Content Provider gtxjoe Posted January 11, 2014 Content Provider Posted January 11, 2014 I am testing "W32 Red Blink 500 5" and it only blinks once when I pulse the sw. Am I doing something wrong?
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 this will red blink 5 times for each on and off of 100 ms, is it what you wanted?
Content Provider gtxjoe Posted January 11, 2014 Author Content Provider Posted January 11, 2014 Yes I expected 50% duty cycle for either 500msec or 500msec*5= 2500msec I just ran another test with longer durations using: 1) W26 Red Blink 10000 10: It behaved5sec on and 5 sec off 2) W26 Red 10000 10: It behaved 1sec on, 1sec off for a total of 10 cycles #2 what I was trying to achieve so I can use that. Is this the correct usage or is there an issue with the Blink call? Thanks again for all the work on the existing table configs!
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 Ah yes, what i said is in fact red 500 5, red blink 500 5 will do a blink of 1 sec on off 5 times, if i'm correct, i don't use that a lot, what i like is for example red blink f500
Content Provider gtxjoe Posted January 11, 2014 Author Content Provider Posted January 11, 2014 Okay, the DirectOutput documentation is wrong since the word Blink is not used - http://directoutput.github.io/DirectOutput/inifiles.html Blink defines blinking with a default interval of 500ms. ... Setting examples W32 Red Blink 500 5 will make a rgbled blink red for 5 times with a interval of 500ms when switch 32 is activated. W32 Red Blink 250 5 F200 same result as previous example but the color will fadin and out in 200 millieconds.
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 yeah this can be very complicated, i remember i tested that one day S48 Red Blink 2000 2 w500 m2000 fu500 fd550
Recommended Posts
Archived
This topic is now archived and is closed to further replies.