ringorian Posted January 11, 2014 Posted January 11, 2014 Thanks for adding custom fields in the Table Configs ! Always when i play a real pin i think the feedback for Slingshots and Bumpers ist not real with only contactors, so now i can map these 5 Solenoids on Custom Output and drive a second shaker which is under my custom wooden "Lockbar" with it. Its a mabuchi motor which i had over from my ivibe cushion. Works nice ! Some pics where and how its mounted
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 Interesting, what is the shaker reference?
ringorian Posted January 11, 2014 Author Posted January 11, 2014 Interesting, what is the shaker reference? Must be this. http://www.mabuchi-motor.co.jp/cgi-bin/catalog/e_catalog.cgi?CAT_ID=rs_365sh Send me your adress and i will send you one incl. the red case for all your effort in configs. have 3 or so left i think. Should be affordable since germany belgium shouldnt be so expensice to ship ..
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 will sent you a pm, thanks so how do you wire it on your ledwiz? a custom field just for it or you combine it with the slings contactors?? you use them on 24v?
ringorian Posted January 11, 2014 Author Posted January 11, 2014 will sent you a pm, thanks so how do you wire it on your ledwiz? a custom field just for it or you combine it with the slings contactors?? you use them on 24v? Ok. Its a custom field where i put in manually the solenoids for slings and bumpers. Cross Connecting them to slings and bumpers is to much maybe. I drive it with 12 v direct on ledwiz output.
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 For the slings it is not a lot, only slings sols are usually mapped, but bumpers yes.. How many you have on your cab?
ringorian Posted January 11, 2014 Author Posted January 11, 2014 At the moment i have 9, one is cross mapped, so ten. Do you have any database/tool with which you can fill a custom field for every table in the ledwiz tool ?
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 so you would need 9 custom fields??? there's no tool that fills automatically, i did all of them manually
ringorian Posted January 11, 2014 Author Posted January 11, 2014 so you would need 9 custom fields??? there's no tool that fills automatically, i did all of them manually Nono, i thought you asked about contactors. I only use one custom field which has the mostly 5 sol in mapped on a port to the ledwiz..
Content Provider arngrim Posted January 11, 2014 Content Provider Posted January 11, 2014 so one custom field for 5 shakers??
ringorian Posted January 11, 2014 Author Posted January 11, 2014 Nono, just one lil shaker for one custom field filled with s9/s10/s11/s12/s13 for example.
DJRobX Posted January 26, 2014 Posted January 26, 2014 I use one of the custom fields as an "authentic" shaker port as well. I think there are only 10 or so tables that use a real shaker.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.