VPX 10.8 no mouse cursor on playfield or backglass, DMD is visible.

[kenzeiger]

I posted this in general area by mistake.  Hopefully this is the correct choice.  

 

In 10.8 both 32bit and 64bit I have lost visual mouse cursor.  Working in 10.74 but I have added 9 tables in 10.8 all working fine just lost ability to make changes.  I have turned off and on the use mouse inside the emulators with no change.  I have also turned off and on the use exclusive full screen mode with no change.   I updated scripts, (I think) with no change.  I can usually figure these issues out but this one has me puzzled?  Please help.  3 screen set up with 1920x1080 playfield and backglass with a 800x480 DMD.  Modified Arcade1up cabinet.

[Cliffy]

1 hour ago, kenzeiger said:

I posted this in general area by mistake.  Hopefully this is the correct choice.  

 

In 10.8 both 32bit and 64bit I have lost visual mouse cursor.  Working in 10.74 but I have added 9 tables in 10.8 all working fine just lost ability to make changes.  I have turned off and on the use mouse inside the emulators with no change.  I have also turned off and on the use exclusive full screen mode with no change.   I updated scripts, (I think) with no change.  I can usually figure these issues out but this one has me puzzled?  Please help.  3 screen set up with 1920x1080 playfield and backglass with a 800x480 DMD.  Modified Arcade1up cabinet.

Does it show up when you hit escape or F1?  If it does this is just how the mouse works now with 10.8. If it doesn't then your scripts folder is out of date

[tmpc]

When in an 10.8 table running i press D and then esc to show the mouse curser on the playfield .

Not sure if that will help your issue.

[AnthonyRavenwood]

On 3/22/2024 at 9:04 PM, tmpc said:

When in an 10.8 table running i press D and then esc to show the mouse curser on the playfield .

Not sure if that will help your issue.

Yesssssss!!!! This finally fixed it, thank you!

[Cesar]

On 22/3/2024 at 22:04, tmpc said:

Cuando estoy en una mesa 10.8, presiono D y luego esc para mostrar el cursor del mouse en el campo de juego.

No estoy seguro de si esto ayudará a resolver tu problema.

Thank you so much for your explanation, it was very helpful. It worked!!!

[Killmanwar]

On 3/23/2024 at 2:04 AM, tmpc said:

When in an 10.8 table running i press D and then esc to show the mouse curser on the playfield .

Not sure if that will help your issue.

❤️