V1kt0R52 Posted December 17, 2013 Share Posted December 17, 2013 Hi all I've purchased a PacLed64 from ultimarc, installed DOF in the plugins directory of VPinball as recommended. PacLed64 is working fine with the PacLed64 software (script and direct mode). The problem is with DOF...When I launch DirectOutputConfigTester, the script stops and nothing else happens, active/deactive all do nothing... I'm trying with Cirqus Voltaire table. cabinet.xml <?xml version="1.0"?> <Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <OutputControllers> <PacLed64> <Name>PacLed64 1</Name> <Id>1</Id> </PacLed64> </OutputControllers> <Toys> <Lamp> <Name>Start Button</Name> <OutputName>PacLed64 1.01</OutputName> </Lamp> <Lamp> <Name>Launch Button</Name> <OutputName>PacLed64 1.02</OutputName> </Lamp> </Toys> <Colors /> <AutoConfigEnabled>true</AutoConfigEnabled> </Cabinet> Cirqus Voltaire.xml <?xml version="1.0"?> <Table xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <TableName>Cirqus_Voltaire_-_Williams_1997</TableName> <TableElements> <TableElement> <TableElementType>Lamp</TableElementType> <Number>1</Number> <Name>Start Button</Name> <AssignedEffects /> </TableElement> <TableElement> <TableElementType>Lamp</TableElementType> <Number>2</Number> <Name>Launch Button</Name> <AssignedEffects /> </TableElement> </TableElements> <Effects /> <AssignedStaticEffects /> <AddLedControlConfig>true</AddLedControlConfig> </Table> Can someone tell me what i'm doing wrong please? Thanks for any help Link to comment Share on other sites More sharing options...
Content Provider swisslizard Posted December 18, 2013 Content Provider Share Posted December 18, 2013 Hi For a start, it probably easiest if you just use ini files forn the config of the Pacled64. With the durrent DOF release (thing will be a bit defferent in future releases), DOF uses ini files which have numbers between 20-27 for the configuration of Pacled64 units (20 & 21 are Pacled64 unit 1, 22 & 23 are for Pacled64 unit 2 and so on). The Pacled64 units are auto detected by DOF, so there is no need for a cabinet.xml. Try the following: Get rid of your config xml files or move them somewhere where DOF doesn't find them. In the config tool, define 2 more ledwiz units in the "My account" tab. Under "Port assignments" assign the correct toys to the outputs of the extra devices you have created. Generate/download the new config ini files. Rename the 2 new ini files to have numbers 20 and 21. Try if it works. If it doesn't work, please let me know and post a excerpt of the log file containing the lines for the session where you have tried the above setup. Regards Tom Link to comment Share on other sites More sharing options...
V1kt0R52 Posted December 18, 2013 Author Share Posted December 18, 2013 Hi SwissLizard Thanks for your response Unfortunately, no change... In the config tool, I've assigned: "DEVICE 1" - Port 1 : Start Button- Port 2 : Launch Button ==> directoutputconfig20.ini "DEVICE 2" - Port 1 : Start Button - Port 4 : Launch Button ==> directoutputconfig21.ini DirectOutput.log --------------------------------------------------------------------------------- 2013.12.18 19:05:18.865 DirectOutput Logger initialized 2013.12.18 19:05:18.865 DirectOutput Version 0.6.5053.22548 as of 2013.11.01 12:31 2013.12.18 19:05:18.866 Debug: Writting of debug log messages is enabled 2013.12.18 19:05:18.866 Global config loaded from: D:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml 2013.12.18 19:05:18.866 Loading Pinball parts 2013.12.18 19:05:18.866 Loading script files 2013.12.18 19:05:18.868 Script files loaded 2013.12.18 19:05:18.868 Loading cabinet 2013.12.18 19:05:18.869 No cabinet config file loaded. Will use AutoConfig. 2013.12.18 19:05:18.871 Cabinet auto configuration started 2013.12.18 19:05:18.968 Detected and added PacLed64 Id 1 with name PacLed64 1 2013.12.18 19:05:18.978 Cabinet auto configuration finished 2013.12.18 19:05:18.978 Cabinet loaded 2013.12.18 19:05:18.978 Loading table config 2013.12.18 19:05:18.979 Warning: No table config file found. Will try to load config from LedControl file(s). 2013.12.18 19:05:18.979 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName cv_14 2013.12.18 19:05:18.982 Loading LedControl file D:\DIRECTOUTPUT\directoutputconfig20.ini 2013.12.18 19:05:19.037 Loading LedControl file D:\DIRECTOUTPUT\directoutputconfig21.ini 2013.12.18 19:05:19.082 2 directoutput.ini or ledcontrol.ini files loaded. 2013.12.18 19:05:19.086 Config for RomName cv_14 exists in LedControl data. Updating cabinet and config. 2013.12.18 19:05:19.101 Table config loading finished 2013.12.18 19:05:19.101 Pinball parts loaded 2013.12.18 19:05:19.101 Starting processes 2013.12.18 19:05:19.103 Initializing cabinet 2013.12.18 19:05:19.108 PacLed64 Id:1 initialized and updater thread started. 2013.12.18 19:05:19.109 Cabinet initialized 2013.12.18 19:05:19.112 Framework initialized. 2013.12.18 19:05:19.112 Have fun! 2013.12.18 19:06:41.739 Finishing framework 2013.12.18 19:06:41.742 Finishing cabinet 2013.12.18 19:06:42.768 PacLed64 Id:1 finished and updater thread stopped. 2013.12.18 19:06:42.768 Cabinet finished 2013.12.18 19:06:42.768 DirectOutput framework finished. 2013.12.18 19:06:42.768 Bye and thanks for using! Link to comment Share on other sites More sharing options...
Content Provider swisslizard Posted December 18, 2013 Content Provider Share Posted December 18, 2013 That is strange. According to the log DOFdetects the Pacled64 and the config files. It even finds the table config in the ini files. Just to be sure, to which physical outputs of your PacLed64 have youi connected your leds? Port 1,2,33 and 36? Can you please post the lines for circus voltaire (the lines stating with cv), so I can check out your config. Regards Tom Link to comment Share on other sites More sharing options...
Content Provider Itchigo Posted December 19, 2013 Content Provider Share Posted December 19, 2013 Sorry couldn't resist: https://www.youtube.com/watch?v=RztfjHdM-pg Link to comment Share on other sites More sharing options...
V1kt0R52 Posted December 20, 2013 Author Share Posted December 20, 2013 LEDs are connected to ports 1,2,33 and 36 yes directoutputconfig20.ini cv,L88 Blink fu500 fd550,W18 Blink fu500 fd550,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 directouputconfig21.ini cv,L88 Blink fu500 fd550,0,0,W18 Blink fu500 fd550,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 Link to comment Share on other sites More sharing options...
V1kt0R52 Posted April 14, 2014 Author Share Posted April 14, 2014 Hi all I'm back with my pacled64 and DOF problem... @Swisslizard: I saw your video with pacled64 and Cyclone table. Can you explain how did it works ? Which file and config are you using ? Please Thanks for all [EDIT] Did someone use pacled64 and DOF and can explain how it works ? Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted April 14, 2014 Content Provider Share Posted April 14, 2014 It is indeed the ini20. I am busy with extending configtool, configuring and generating ini20 for pacled, with max 64 outputs, it is already, is working in dev Link to comment Share on other sites More sharing options...
Content Provider swisslizard Posted April 14, 2014 Content Provider Share Posted April 14, 2014 QUick explanation on Arngrims post: The current official release of DOF uses 2 ini files to configure all 64 outputs of a Pacled64. With the next release this is going to change, since ini files with mre than 32 columns will be supported, so we only need 1 ini file for the pacled64. Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted April 14, 2014 Content Provider Share Posted April 14, 2014 Ah ok i wasn't aware Link to comment Share on other sites More sharing options...
V1kt0R52 Posted April 28, 2014 Author Share Posted April 28, 2014 Works fine with the new version of DOF !!! Link to comment Share on other sites More sharing options...
justow Posted May 27, 2014 Share Posted May 27, 2014 hi I am having the same problem no matter what I try I cant get it working, I have the exact same log as above but no output I followed these instructions and still no good please help Link to comment Share on other sites More sharing options...
V1kt0R52 Posted May 27, 2014 Author Share Posted May 27, 2014 Hi justow The last official release have this issue. Swisslizard send me the link via email for the beta version which works all good Send him a pm. Link to comment Share on other sites More sharing options...
Content Provider swisslizard Posted May 27, 2014 Content Provider Share Posted May 27, 2014 I'll be back from vacation by the end of the week and hope to find find a solution for you once I'm home. Link to comment Share on other sites More sharing options...
justow Posted May 28, 2014 Share Posted May 28, 2014 thanks Link to comment Share on other sites More sharing options...
Spektre Posted May 28, 2014 Share Posted May 28, 2014 One the new revision of DOF is released, the Advanced DOF Config tool will support these new controller boards. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.