dpannell2 Posted April 28, 2019 Share Posted April 28, 2019 About 3 months ago, I made a goDMD wall clock. The clock has been running without issue since then, I really like it and decided to make a few more. As you are probably aware, the clock was designed/programmed by steve45. For more info, see https://go-dmd.de/. Below are some pics and video links of my clock. This is a very basic frame that probably only works for wall hanging. I have 3 of them that are close to completion. If you are interested in one, send me a PM. Just like pin2dmd, the clocks require activation with Steve at the listed website. Features: WiFi for clock configuration and time sync. IR remote for menu navigation/configuration. 8GB SD card for loading animations and activation key. 12ft. white power cord(brown also available). Here is a link to some short videos showing the operation of the clock and animations. https://drive.google.com/open?id=1-BQrRJGZCSoQs3Bas7cUQUzCBOIHmsZP Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted April 30, 2019 Content Provider Share Posted April 30, 2019 Latest version will support colorized animations Link to comment Share on other sites More sharing options...
dpannell2 Posted May 1, 2019 Author Share Posted May 1, 2019 That's very cool! Where is this version? I don't see any newer firmware on bintray. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted May 1, 2019 Content Provider Share Posted May 1, 2019 Coming soon. Are your clocks Nucleo or VET based ? Link to comment Share on other sites More sharing options...
dpannell2 Posted May 1, 2019 Author Share Posted May 1, 2019 These are VET shields. Link to comment Share on other sites More sharing options...
dpannell2 Posted May 8, 2019 Author Share Posted May 8, 2019 To give a perspective of size, here is a pic of the clock compared to the standard size pin2DMD display. Link to comment Share on other sites More sharing options...
outhere Posted May 9, 2019 Share Posted May 9, 2019 Be cool to used on top of the pinball and have the game trigger an animation Link to comment Share on other sites More sharing options...
dpannell2 Posted June 1, 2019 Author Share Posted June 1, 2019 Hey outhere, good to here from you. That would be cool but I'm not aware of any way to do that with the go dmd VET6 board. However I believe you could use the same frame and LCD panels to accomplish what you suggest using the pin2DMD shield/board set. I could make some that way if there is enough interest. Link to comment Share on other sites More sharing options...
dpannell2 Posted October 6, 2019 Author Share Posted October 6, 2019 I still have a few of these available. Send a PM if you are interested. Link to comment Share on other sites More sharing options...
MikeDASpike Posted November 1, 2020 Share Posted November 1, 2020 I ordered 1, package delivered from US to the NL within 10 days. It has a good place in my room now Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.