nairolf Posted August 17, 2020 Share Posted August 17, 2020 Hello, I am encountering a problem on a field that I built myself for Nucleo. No files on my SD are being read.Neither the .key nor the ROM files. I guess the problem comes from my SD drive on my shield and I am looking for a way to find out exactly if this is the problem. I tried to redo the soldering without success and I use a WaveShare micro SD drive. Is there a way to test this drive on my PC (via a micro usb connection)? Thanks! Link to comment Share on other sites More sharing options...
nairolf Posted August 17, 2020 Author Share Posted August 17, 2020 Well, I've find a reply by Lucky1: "If you go into the onscreen menu and initiate a Save Config a pin2dmd.dat should be generated on an empty SD card." I'll test this this evening! Link to comment Share on other sites More sharing options...
SteveNZ Posted August 18, 2020 Share Posted August 18, 2020 I had 2 faulty Waveshare SD drives. You may have the same problem. Link to comment Share on other sites More sharing options...
nairolf Posted August 19, 2020 Author Share Posted August 19, 2020 Thanks for this information !? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.