reko19 Posted February 10, 2015 Share Posted February 10, 2015 Is there an explanation of the syntax for the directoutputconfig.ini available somehere? For instance, begining of the AFM entry looks like this for my setup: afm,L88 m550 Blink fu500 fd600,W18 Blink fu500 fd600,0,L86 m800,ON,... L88 is lamp number, W18 is a switch number, S is for solenoid. Numbers correspond to the numbers in a particular VP table.Entries are separated by comas. First entry after afm corresponds to port 1 on LedWiz, etc. 0-means this particular ledwiz channel is not ised, on-channel is always on. But how about all the other stuff? The reason I am asking is because I was able to get fire and extra ball buttons to work properly using old setup. Want o see if I could recreate it with direct output. thank you. Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted February 10, 2015 Content Provider Share Posted February 10, 2015 check old guide here http://www.hyperspin-fe.com/forum/showthread.php?10980-Tutorial-How-to-config-Ledwiz-PacDrive and dof specific here http://directoutput.github.io/DirectOutput/index.html Link to comment Share on other sites More sharing options...
reko19 Posted February 10, 2015 Author Share Posted February 10, 2015 Thanks for the reply. I am familiar with this guide, this is what I was using with my previous setup. But I haven't seen @t@/W57, fu500 fd600, and some other entries before. Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted February 10, 2015 Content Provider Share Posted February 10, 2015 @t@ and @dt@ replaces the values in the script by the variables like below, you can change the values in the port assignment tab,target and drop target [Variables DOF] t = 300 I32 dt = 180 I40 [Config DOF] aar,0,ON,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 aavenger,ON,ON,0,0,S3 60/S3 60 Invert/S9,S13,S8/W23 @t@/W44,S12/S14/W43,S48,S10/S46,0,0,S17,0,0,0,S9 Blue/W35 Cyan f200,W34 Cyan f200/W38 Yellow f200/W44 Red/W45 Red,W51 Red f200/W52 Blue 60 fd800/W59 Yellow f200,W37 Yellow f200/W40 Cyan f200/W43 Red/W60 Red f200,S13 Blue/W39 Cyan f200/W42 Red Link to comment Share on other sites More sharing options...
reko19 Posted February 10, 2015 Author Share Posted February 10, 2015 ok, starting to make sence. thank you my guess fu and fd is fade up and fade down duration Link to comment Share on other sites More sharing options...
Content Provider arngrim Posted February 11, 2015 Content Provider Share Posted February 11, 2015 yes, it should be on the dof doc, isn't it? Link to comment Share on other sites More sharing options...
reko19 Posted February 11, 2015 Author Share Posted February 11, 2015 not sure, pretty extensive documentation for DOF, I could've missed it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.