MTPPC Posted January 17, 2014 Share Posted January 17, 2014 I read somewhere that if an output on the ledwiz was active when you closed a VP table, it would stay active until reinitialized on another table. Does this happen with DOF? I'm not using DOF with my table menu, so I'm just wondering. Link to comment Share on other sites More sharing options...
Content Provider gtxjoe Posted January 17, 2014 Content Provider Share Posted January 17, 2014 When DOF exits, it will turn off all the LEDwiz outputs. In actual practice though, if VP crashes upon exiting, the LEDWiz outputs can be left on. I had this issue with PinballX, so I added the LEDoff or LEDclear.bat routines to Pinballx setup to make sure the lights shutdown when returning to PinballX. Maybe they have fixed this issue by now, but I haven't bother to remove them. Link to comment Share on other sites More sharing options...
ArcadiusMaximus Posted March 21, 2015 Share Posted March 21, 2015 Hello, I have the opposite request. Can you disable DOF from shutting off the LEDwiz? I'm using a VP cabinet and when I exit a table in hyperspin, DOF is clearing my cabinet LEDs. I would like to disable that feature and resort back to using the ledset.bat + ledclear.bat method if possible. Or is there a new method ( not stop.controller scrpit edit though) that can do the same thing? Can this be achieved? Thanks ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.