Content Provider lucky1 Posted December 27, 2016 Content Provider Share Posted December 27, 2016 I updated the files in the download section to support the latest pinmame 2.8and dmddevice.dll. You also need pin2dmd firmware 2.36 This patch is for V-Pins only. For real pinball machines you need to have the pinballbrowser PBM file from the author to patch it for the serial number of your machine. You also need a serial connection from the controller to the SAM board. For V3 shields you need a cable from pinheader to SUB-D9 connector. For older shields you need a TTL converter from eBay and connect it to these pins. B6 - USART1 TX to Max232B7 - USART1 RX to Max232 Search for DB9 TTL on eBay For the macro files please contact the author Link to comment Share on other sites More sharing options...
roar Posted January 22, 2017 Share Posted January 22, 2017 Got this one up and running today... amazing what happens when you actually read the directions left behind by others. You need to right version of the table, you need to patch it, you need to run it with the right exe... and you can't run it in windowed mode! Anyway, after all that... holy smokes, another beauty! These coloured roms are so amazing, thank you so much for your efforts on these Sharkky! Link to comment Share on other sites More sharing options...
stefanaustria Posted January 22, 2017 Share Posted January 22, 2017 Really great ! Was there ever a Avengers PM5 Table ? Link to comment Share on other sites More sharing options...
roar Posted January 25, 2017 Share Posted January 25, 2017 I do not believe there is a PM5 version... not one that I can find anyway. I wonder if this is on anyone's VPX list. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.