nexus79000 Posted August 2, 2019 Share Posted August 2, 2019 Hello everyone I make a face a PIN2DMD a little annoying ... Until now everything worked very well. I changed my graphics card and since when I launch the PC, the PIN2DMD is well recognized with its driver libusb-win32 but then, as soon as I test a rom with VPinName, VPinName freezes, the DMD displays 'PIN2DMD' in red and or after a while, the DMD turns off. For the time being: - I reflash the card and install the latest version of PIN2DMD, - handed the old graphics card (nothing to see but had to try) - Change the USB cable ... Nothing works Do you have an idea? Thank you! Sorry for my english i use translate for this post.... Link to comment Share on other sites More sharing options...
outhere Posted August 2, 2019 Share Posted August 2, 2019 This is what I use Link to comment Share on other sites More sharing options...
nexus79000 Posted August 3, 2019 Author Share Posted August 3, 2019 Thanks for your answer, but i tried it and not work. Windows reconized the STM32 with a good driver. Link to comment Share on other sites More sharing options...
slippifishi Posted August 3, 2019 Share Posted August 3, 2019 I had some strange behaviour with my PIN2DMD recently that I believe were caused by me using a USB 3 port; the problem went away when I moved it to USB 2... Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted August 4, 2019 Content Provider Share Posted August 4, 2019 On 8/3/2019 at 5:20 PM, slippifishi said: I had some strange behaviour with my PIN2DMD recently that I believe were caused by me using a USB 3 port; the problem went away when I moved it to USB 2... Good point ! I myself needed to turn some options off in the bios to make it work properly ! Link to comment Share on other sites More sharing options...
mrtr32 Posted February 26, 2022 Share Posted February 26, 2022 Hello everyone, I own a pixelcade LED display using COM3 Port and working great with DMDext. Is it possible with your mod to make P-ROC DMD to work with the Pixelcad LED? Port used is COM3 idVendor=1B4F idroduct=0008 Thanks for your work! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now