Search the Community

VR room for the incredible Willy Wonka Pro table submitted by 'marty02'. This VR room was design based on the Jersey Jack Willy Wonka Limited Edition cabinet. This download comes with the table with VR room and the required PUP video pack that goes into your PinUpSystem/PUPVideos/ folder. NOTE: If you already have the required PUP video pack for this table, choose the version WITHOUT the PUP pack. The table itself has not been changed or modified in any way from the original submitter. ENJOY!

Updated VR room for Stranger Things, created for Scottywic's Stranger Things original table. This is for VR only, not a hybrid. Thanks to Scottywic for the permission. VR Cabinet Assets taken from Sixtoe's minimal VR table, with permission. PUP pack required and can be downloded from Scottywic page here: https://orbitalpin.com/downloads/ (Or direct link here: https://mega.nz/file/6UEnSQyC#Wm57VL2YfCzi2Sr3bVEUBIc4KGwThQX3fVInnuhj8jM) (password for the unzip is friendsdontlie) After unzipping, place the STLE folder in the PUPVideos folder. If you enjoy the VR room, please click the like button or leave a comment. Enjoy! Stranger Things.mov

This is a VR Room Conversion from Hanibals 4k Blood Mod. There are two minimal VR Rooms because i wanted to save Performence for the 32bit Version. You can change the Cab Decals and Backglass to Premium, Images in File included. Thanks to Rascal my Friend for the alternative Laser Mod and Hybrid. VR user meeting point: https://discord.gg/8CRnkssmbh -nFozzy Physics -Fleep Sounds -Hybrid by Rascal -alternative Laser Mod (better Performence) by Rascal Attention: This Table should only be played in 32bit until the 64bit Bug gets resolved!!! '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'If you want to switch the VRROOM from NORMAL to DARK then hit 2 times left Magnasafe!!! 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 ' END USER VR-OPTIONS '*************************************************** Link to Altcolor: Link to Pup Pack: Thanks to Hanibal2001 for Permission! Link to original File from Hanibal2001: Credits: ICPJUGGLA, FRENETICAMNESIC, GTXJOE, RANDR, FLUPPER, DARK, ZANY, NORTHVIBE, URIELL, PAULO, PINBILL, DOZER, HANIBAL2001, SIXTOE, RASCAL And a big THANKS to Apophis for his nice tutorials!

I want to share a VR Room Conversion of Blade Runner 2049 with you today. I converted this table for VR because it is a Beauty from "wpilot" and should not be missing in any VR collection. I hope someone has as much fun with it and like it as I do, so I'm going to share it with you guys now. I had to adjust a few little things, prettify and hide them, but the table works quite well now in VR. Edit 10/03/2024: New Version Blade Runner 2049 (2021) FULLDMD PUP Edition.zip Attention: If the Ball is too bright open in VPX->Preferences->Video/Graphics Options and activate under Ball Rendering "disable Lighting" then click on the left "Specific table overrides" and save. For all of you with VPMFlips Error open Script and look at Line 79 "Const UseSolenoids = 2" turn it to 1 and try again. Thanks to Panasony, one of our Community Members from "VR Pinball Group." (https://discord.gg/dKSP9eTPt7) we can present you a better looking Full DMD now. Hopefully this is the last update at least for now. You should definitely use the linked pup pack (and leave a like) so that the new FuLL DMD works properly. Then copy the pup files from my .zip file into your pup folder (make a backup). Sorry guys for the inconvenience but the Full DMD update is worth it, I didn't want to withhold it from you. '********************* VR OPTIONS ************************************************** '*********************************************************************************** 'VR PuP/Backglass - Switch the VRBackglass with your right MagnaSafe !BEFORE! you start a Game! 'If you want to use the Pup-Pack hit 3 times the right MagnaSafe Button to switch to PuP Backglass! 'LUT Change - Switch the LuT Options with your left MagnSafe! 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 'VR Poster-Right - Set VRPosterR = 0 to turn off VR Poster-Right. VRPosterR = 1 'VR Poster-Left - Set VRPosterL = 0 to turn off VR Poster-Left. VRPosterL = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 '*********************************************************************************** If you want to use the Pup Pack follow this Link! A big thanks to wpilot for creating such a beautyfull table and Rajo Joey for the LUT Template and more importantly the elimination of the annoying Flex DMD error and the possibility to change the backglass via Magnasave button and some other fixes. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and of course Studlygoorite and Solters for beta testing . And not to forget JP Salas for making the Original 'Pokemon Pinball' Table. And a big THANKS to Apophis for his nice tutorials! Link to the original Blade Runner Table: https://www.vpforums.org/index.php?app=downloads&showfile=14820&st=50#commentsStart

Gottlieb's 1984 Alien Star! Journey to an Alien Star for a pinball battle in space! Multiball, skill shots, and plenty of fast action! So much fun to play! Thanks to Borgdog for providing original playfield and plastic scans, cabinet stencils, and physical measurements of his actual table. He also had lots of authentic Gottlieb primitives to use, and did a tremendous amount of testing! Thanks also to Redbone who took those scans of the playfield and plastics and did a tremendous amount of work to get them to look so good! He also spent a ton of time with all the other graphics on the table as well as a ton of testing! Hauntfreaks provided the higher resolution VR backglass. DarthVito did the VR wall environment. I updated to latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, playfield mesh for a saucer bevel, roth standup targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Dozens and dozens of hours were spent studying gameplay videos (2 streams were recorded by Borgdog) to match the table skill shots and action. Thanks also to Rothbauerw for providing updated flipper physics code to help with the skillshots. That code was needed to be able to do some of the skillshots. This table is loaded with options. Various balls, ball brightness, flippers, tents, caps, plastic edge colors, LUTs, Dip settings, siderails, and plenty of other VR stuff. Redbone encouraged me to include special edge LED lighting in the plastics that iaakki originally did for another table. Looks really cool, and is included as an option. The ROM can be found at pinballnirvana.com... alienstr.zip). There's an option in the script to change the DIPS, however it will load a default set when you launch the table. NOTE: YOU HAVE TO START THE TABLE 1ST, EXIT, AND THEN RESTART FOR DIP CHANGES TO TAKE EFFECT. This is ONLY the first time you launch the table. There's also an option for "Tourney Mode". In that mode it'll play a little harder with different DIP settings, which excludes extra ball... and only allows for points on 3 balls. Tourney mode also sets colors and rainbow'ed LEDs on plastics. NOTE: you'll have to start and restart the first time in that mode for the DIP changes to take effect. If you want to change the DIPs... you will need to go into the script options and change SetDIPSwitches to 1, then open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options. Once entered, you can exit out, and restart. That will then set the new ROM settings. These are the default DIPS that are and set at original table launch: 1=Coin Chute same 0=3rd coin chute no effect 0=Game mode of replay for hitting threshold 1=Number of balls =3 1=Playfield Special of extra ball (However in tourney mode this is zero) 0=Novelty of normal game mode (However in tourney mode this is zero) 1=Match feature 1=Background Sound Thanks again to Borgdog and Redbone for the playfield and plastic images, the stencils, the testing, and all the feedback! Also thanks to Hauntfreaks for the updated Backglass images, and to Rothbauerw for his flipper physics code. Also thanks to pinstratsdan, and everyone else from the VPW team that provided testing and feedback!

This table was originally done by Herwey, and he gave me the permission to add all the latest physics, sounds, etc. to this fun table. Thank you very much, Herwey! On his version 1.1 he had help from several others including Schreibi, 32assassin, OldSkoolGamer, Cosmic80, Bord, Rosve, Batch, Vogliadicane, Flupper, Ninuzzu, Dark, DJRobX, and Thalamus. I did quite a few updates in version 2.0 mentioned below (and detailed in the vpx script), essentially getting up to the latest VPW physics, lights, and sounds, and other corrections. This was the first table I put the 3D inserts in (Thanks to apophis for his tutorial, feedback, and advice!). Also thank you to all the testers on the VPW team for testing, feedback, and suggestions for improvement: nFozzy, apophis, Aubrel, Wylte, Rik, Rajo Joey, iaaki, BountyBob, rothbauerw, tomate, PinStratsDan, and Lumi! Note: If you are playing in VR... you MUST select VR_Room = 1 in the script!! There are several options to select in the script, including ball brightness, color mods, GI and Flasher options, VR Room, VR clock, VR posters, VR topper. Sub mods and flippers can be changed by clicking the right and left magna save buttons. (You can turn that option off in the script as well) IF YOU experience performance issues... there are options to change that. First of all, you can uncheck "Reflect Elements on Playfield in the table options window. Also, you can turn dynamic shadows off for additional performance if needed. Version 2.0 Updates include: - Implemented the table to a hybrid (desktop, cab, and VR), and has options for ball brightness. - Added VR to include an animated backglass (image from Wildman), and several VR options (room, poster, clock, topper). (Thanks to Sixtoe's VR templates). Also animated all the flippers, plunger, etc. - The table and flipper physics have been updated to the latest VPW standards, as well as dynamic shadows, drop targets, standup targets, ramprolling sounds, and several other tweaks. - Fleep sounds added, as well as relay sounds. - Added Flupper domes. - Adjusted the flippers to be actual size, and tweaked the flipper physics. - Added 3D insert primitives and tuned the lighting significantly for those. Lots of work on the playfield cutouts, and associated text layer. - Changed lamp control to VPW Lampz. - Corrected some errors in the table, including spinner movement, rebounder action, some ramp lift code, timing on saucer entry, and a few other things. - Adjusted the lighting levels, and GI overhead. - Tomate added new Bally Flipper primitives, wall textures, and fixed an issue with the ramp lift primitive... as it wasn't built correctly in blender. - Enhanced performance as much as I could by removing all getballs calls and no longer destroy and recreate balls. I implemented only the gBOT global call. - Updated the trough code to manage all balls on the table. - Updated some images to implement see through holes in the apron and sub. - Created new background for desktop mode, with animated lighting. - Added updated center drain post dome from Bord's space shuttle (done by Rothbauerw). - And so many other updates, all documented in the script. Once again thank you to Herwey, nFozzy, apophis, Aubrel, Wylte, Rik, Rajo Joey, iaaki, BountyBob, rothbauerw, tomate, PinStratsDan, and Lumi for testing, and feedback!!

I Added the VR conversions to Apollo 13 last year (2020), the version of the table that was modified was done by Balater (Thanks for the permission to mod!), originally done by Herweh, Fransisco666, and 32assassin. Over time several authors worked on the early versions of that table including, Thalamus, JP, DJRobX, Rothbauerw, Amgrim, ClarKent, Chucky87, agentEight6, and Bigus1. I also used the dark image from chucky87's backglass file and imported into the table for use in VR. That mod done in 2020 had several updates specifically for VR, and other light mods. Sixtoe assisted at that time as well. Also, Retro27 added a topper and a few other VR updates and I animated the backglass for VR as well. Since that time I added several more updates, including nFozzy and Roth physics and flippers, Fleep sounds, several physics updates to the table, slings, and bumpers. A few other modifications were done as well to the sounds, playfield, and other adjustments. Thanks to Bord for posting tutorial videos. Also thanks to the VPW team for their help and examples. I also added dynamic shadows done by Iakki, Apophis, and Wylte. The latest update, Version 2.0, includes so many fixes and updates. I've corrected the number of balls coming out of the rocket during multiball, as well as the rocket timing, and subway trough. The ramp behind the moon now works for the orbiter and moon gravity missions, the trap door for the 8-ball lock is animated, fixed the slings, and added holes under the sling movements. Also the left spinner lane didn't send the ball into the upper saucer. That is now corrected. I've also added 16 switchable LUTs. Then, several members from the VPW team jumped in and made this table so amazing. What a great group! Thank you all! oqqsan: Added Flupper dome lights and flashers. Also fixed the ball stuttering when the moon rotated with the ball. Tomate: created new ramps and textures (they look so real!) Also wire ramps, posts, gates, apron, missing materials in some screws, and other stuff. Skitso: redid the GI lighting, spot lights and inserts. Also warmed the LUT a bit. Sixtoe: Did some visual updates to the ball, moon, rocket, and plastic ramp Apophis: Updated the playfield image for alpha cutouts for Lampz inserts. Added Lampz code, and new inserts. Updated some flipper nudge physics. Corrected the triangularization dynamic shadow effects, removed the subway ball shadows, and lowered the number of dynamic sources. Sheltemke: Provided an updated translite image for the backglass. It's now included in the VR version, and Wildman created a new b2s file. Also, modified the text on the inserts to a text flasher to make it more readable. RIK, Fluffhead35, Lumi, and Wylte all tested and provided feedback. Wylte: Updated the ball shadow code to not turn on when in subways, and other optimizations. Also modified for better performance. Separated dynamic and ambient ball shadow options, and added lockbar key as plunger alternative. This table is a hybrid release, so it will work on desktop, cabinet, and VR. OPTIONS: Options can be selected in the script to change to desktop, cabinet, or VR mode. For VR mode, there's an option for two different room environments, and to add a clock on the wall. Also... VR users... the Dynamic Shadows performance issue has been corrected. However, if you still experience performance issues, you can turn off dynamic shadows or ambient shadows or both in the script. Anyway, I hope you enjoy! And thanks again to Balater, retro27, Sixtoe, oqqsan, tomate, skitso, apophis, sheltemke, RIK, Fluffhead35, Lumi, and Wylte, and the entire team of authors that have contributed to this table over time. If I missed anyone in the credits, let me know, and I'll add, as I don't mean to miss anyone.

Thanks to ckpin for the permission! I had to create a text document with the download link because it somehow did not work with larger files Quote from ckpin: This is a modified version of what was uploaded to VPinball. All the changes and hopefully most of the credits are detailed in the table script prolog. One obvious change is a playfield screen option menu (F6) offering changes to the game rules to help less experienced players reach the more difficult modes (e.g. Somewhere Over the Rainbow). Installation Note Included in this release package are: vpx table, backglass, ultraDMD directory, and a PUPpack. There are also DOF Configtool entries for this table. The backglass file is large and loading may require applying the 4G patch to the backglass server. The backglass provides information on game progress. Removing the backglass is not recommended even when the PUPpack is installed. There is an option in the table script under GAME OPTIONS to turn off the PUPpack triggers if you don't install the PUPpack. Images, animations and sound files will replace the PUPpack videos. However, the PUPpack videos significantly enhance the gameplay experience. Whether the PUPpack is installed or not, the backglass should still be left in the table directory.

With this tool it's possible to switch tables without the need of removing your VR-headset. You can use this tool as launcher for 2D-VPX too. For setup instructions see hints below. Now you can stay at your cabinet while playing and switching tables without the need of VR-controls. The newest version includes most of the released VR-tables as preview-tables. If you want me to add new tables simple leave a comment here. Check out, how it works: Version 4 (coded in Unity) Big thanks to A. Rubin for his amazing work on hundreds of tableskins! Big thanks to Rajo Joey for providing his tablesound-archive! Installation: ---------- install into your VPX folder start only the launcher4.exe inside your VPX folder setup your paths and keys via settings at trayicon-menu restart launcher optimize your single-klick speed rotation-speed (inside launchers overlay-settings) start with 0.0 and increase to 0.1 ... problems with autoupdate? -> try starting launcher as admin Performance problems? 1) Set renderScale to 1.0 ⁠in VR!⁠ 2) Try disabling table-videos 3) Try disabling "room" Changelog: --------- What's new in version 4.8x - new circular tableselection - random table function What's new in version 4.67 Tablesounds are included in the resources. If you want to overwrite the existing sound you can can place your own tablesounds inside /vrlauncher4/config/tablesounds/ The filenames have to match against the tablearray like the vpx-names. What's new in version 4.64 If you want to hear backgroundmusic place mp3 here: /vrlauncher4/config/music.mp3. What's new in version 4.63 You can (it's optional) launch vpx with special params for vr or novr. vrlauncher4/config/config.xml: <vpparams2d>-ini novr.ini -Minimized -Play</vpparams2d> These params will be passed to VPX if you are in launcher 2d-mode. Since 10.8 Beta 5 you can launch VPX with an ini-file with settings. If you setup a novr.ini with the following setting... [PlayerVR] AskToTurnOn = 2 ... VPX will start in 2d mode (turn off VR). <vpparams2d>-ini novr.ini -Minimized -Play</vpparams2d> in vrlauncher4/config/config.xml will load this ini-file while launching tables. The result of these settings is that you can set in the launcher whether you want to play in VR or 2D. The launcher automatically detects if you have a VR device connected, so you won't receive any more error messages in VPX because of that. (F9 toggles VR/2D) What's new in version 4.62 online /config/offlinedata/mytables.csv merges into tablearray You can place your special tables there (readme.txt) What's new in version 4.61 + VR-settingseditor in VR-mode + 2D-settingseditor in 2D-mode Hint: If you want a full table-rotation set rotation angle to 180° What's new in version 4.53 The program was created with the latest Unity LTS compiler and is delivered with an MSI installer to prevent blocked DLLs and read-only directories from causing issues. New features in this version include automatic online and offline updates. Starting from this version, the program can update itself automatically online or manually through copied update files. What's new in version 4.50 1) tablename.bat files will launch corectly. 2) Autoupdate-function added. Please check if /vrkauncher4/update/xdelta.exe is not blocked! Otherwise the update will not work. To activate autoupdates you have to setup settings in config.xml to: <autoupdate>1</autoupdate> Problems: to fix update pls check /vrlauncher4/update/ ✅ check if the xdelta.exe in this folder is not blocked. ✅ check if update_{YOUVERSION}.zip was downloaded ✅ there is a file version.cfg - check if it‘s {YOURVERSION}. if not, zip was not extracted ✅ set version in version.cfg back to {YOURVERSION} to reset update ✅ restart launcher What's new in Version 4.36 <suspendmode>4</suspendmode> Launcher4 will stay alive without animation and userinteractions until vpx finishes. Launcher4's CPU-usage is low. Good loading-times. (waits in an own task) <msaaSampleCount>4</msaaSampleCount> Antialiasing higher = better quality but less performance possible values: 0 disabled 2 = 2x 4 = 4x 8 = 8x <renderScale>1.0</renderScale> UniversalRenderPipelineAsset render scale (Renderresolution of viewport) <floor>1</floor> 0 = disable floor and shadow-rendering on it <bgcolor>0.0,0.0,0.0</bgcolor> Backgroundcolor float values R , G , B 1.0,0.0,0.0 = red 1.0,0.0,1.0 = purple (red+blue) What's New in Version 4.35 <vpxpreviewx>-1</vpxpreviewx> <vpxpreviewy>-1</vpxpreviewy> <vpxprevieww>1200</vpxprevieww> <vpxpreviewh>800</vpxpreviewh> You can move and resize the VPX-Preview window. (x,y,w,h) (-1,-1 disables this movement.) What's New in Version 4.34 <settings> <vrrecentermode>0</vrrecentermode> <gamma>1.0</gamma> </settings> vrrecentermode: 0: launcher calls device-recenter-function. 1: launcher calls device-recenter-function AND resets main camera to viewport. (Meta does not allow device-recenter-function anymore.) gamma: Values between 0.0 and 2.0 will change gamma post process. What's New in Version 4.33 Released October 13 focusgrab works with vpx 10.8 (hidden sdl window) recenter workaround for oculus and openxr What's New in Version 4.32 Released October 12 -ini param removed (because VPX 10.8 beta is handling them automatically) What's New in Version 4.31 Released October 10 If you have a 64bit-system this is your config: <paths> <tables>E:\Tables-VR\</tables> <vpexe32bit>C:\VP\VPinballX_GL_32bit.exe</vpexe32bit> <vpexe64bit>C:\VP\VPinballX_GL_64bit.exe</vpexe64bit> <defaultversion>64bit</defaultversion> <vpparams>-Minimized -Play</vpparams> <highscores>C:\VP\PINemHi\PINemHi.exe</highscores> </paths> If you have 32bit tables you can name them something with "32bit" inside filename. If you have a 32bit-system this is your config: <paths> <tables>E:\Tables-VR\</tables> <vpexe32bit>C:\VP\VPinballX_GL_32bit.exe</vpexe32bit> <vpexe64bit>C:\VP\VPinballX_GL_64bit.exe</vpexe64bit> <defaultversion>32bit</defaultversion> <vpparams>-Minimized -Play</vpparams> <highscores>C:\VP\PINemHi\PINemHi.exe</highscores> </paths> If you have 64bit-tables you can name them something with "64bit" inside filename. What's New in Version 4.30 Released October 1 This time a little update for technicians: Launcher checks for tablepath/tablename.ini sends -ini params to vpx. Launcher checks for tablepath/tablename.bat to launch this instead of exe+params. Tablename and vpx params are sent as params to the bat-file. Make sure, that your bat file waits for VPX to exit. What's New in Version 4.29 alpha Released September 24 64bit compiled with newest stable Unity release all 2023 table-artwork included new "openxr" device value 4.28 FEATURES tabledata offline or ONLINE coded in unity/c# for oculus vr OR openvr (32bit windows) starts only once and takes control, when vpx is quitting 0% CPU-usage while playing VPX much faster loading time than v.3 Favourites are controlled ingame. Hold filterkey and add/remove current table as favourite. You can share your tableartwork and get online artwork inside app since 4.29 coded in unity/c# for oculus vr OR openvr, openxr (64bit windows) ------------------------------------------ INSTALLATION Install downloaded VPX VR-Launcher 4.57.msi. Setup instruction inside /vrlauncher4/readme.txt! start VPX VR-Launcher 4.exe (from the root) right click trayicon and select settings ---------------------------------------------------------- Details are described in the included "/vrlauncher4/readme.txt". Please read this readme.txt before asking. Thanks. ---------------------------------------------------------- have fun! BaSti

It's a long way to the top if you wanna rock n' roll! This mod started out as a simple collaboration between Hauntfreaks and Fluffhead35 to add new physics and VR room ended up as so much more. This table has had the bell code completely reworked by Apophis to work more like the real table. The playfield has been tweaked by none other than nFozzy himself to be more in line with the blueprint. He also fixed the right and left ramps to be true to the real table. nFozzy has graced this table with his experience to make it table amazing to play. This table was a mod of Sixtoe's AC/DC VR Room, where we made it a hybrid table. Fluffhead35 - Fleep, nFozzy physics, dynamic shadows, drop target code and new drop targets, 3d inserts, added new flipper bats, lighting tweaks, added Lampz code, adjusted nudge HauntFreak - Added new VR Room, Lighting Adjustments, Playfield Shadows Sixtoe - Original VR, Lighting, separated out horns on the train, many more he could not remember. Fixed right ramp, fixed bumper flashers. Realignment and prettying up rubbers and stuff. Apophis - New Bell Physics, scripting, guidance nFozzy - new collidable ramps to fix the shapes of them, moved top hole variance, bell metal/orbit metal tweaks, playfield reshape to correct dimensions. implemented ramp protectors, blank sidewalls, ramp stickers, adjusted bell position. Tomate - New visual ramps Retro27 - VR Room / Cabinet Reworked, New DMD Decals, Start button, tournament mode lights added. Adjustment to Instructions cards, added new render mode for VR Schlabber34 – reworked drop targets and other objects in blender for use in table. Bietekwiet, PinStratsDan, BountyBob, VPW Team - Beta testing! Many thanks to the original team who built this table from the ground up: ninuzzu, DJRobX, dark, tom tower, knorr, rysr, Peter J and Javier. And thanks to the VPDevTeam for the freaking amazing VPX.

Thanks to Balutito for permission. This is the english version. So Thank's to them and to: ' randr for VPX conversion ' TerryRed: DOF (converted from DOFLinx mod of FP table), SSF, testing, and Pup-Pack ' HauntFreaks: basic first table build, lighting and playfield images ' Flupper: Dome stuff ' rothbauerw: assisting with flashers code ' Thalamus: SSF ' LynnInDenver: PostDMD PuP Functionality - Requires TerryRed's Pup-Pack for additional files

VR Room added to @agentEighty6's table.

The next VR Room Conversion i want to share with you is the great Hellraiser Table from BALUTITO. This is a cooperation between Jasmin Gagnon and me. Jasmin Gagnon made the start and created a solid basis on which I built up this Conversion. I converted this table for VR because he creates this creepy atmosphere and i love that and of cause it should not be missing in any VR collection. I hope someone has as much fun with it and liked it as I do, so I'm going to share it with you guys now. New in this Version: -nFozzy Physics -Fleep Sounds -new Backbox -missing Rampsound get fixed in future update... '*************************************** VR OPTIONS ************************************************** '***************************************************************************************************** 'VR Room - Set VRRooms = (1) or (2) to switch between the two Rooms. VRRooms = 1 'VR table Glass - Set Glass = 0 to turn off VR playfield Glass. Glass = 1 'VR Playfield Glass Scratches - Set to 0 if you want to turn them off. GlassScratch = 1 'VR Logo - Set VRLogo = 0 to turn off VR Logo. VRLogo = 1 '************************************END OF VR TABLE OPTIONS****************************************** '***************************************************************************************************** You Don't need the B2S File!!! To take full advantage of this table, I strongly advise you to use the superb Puppack made by TEAMTUGA, it expands the atmosphere drastically!!! Link to Pup Pack: Link to original Table from Balutito: A big thanks to BALUTITO for creating such a creepy nice table and give me permission to bring it to the next Dimension. I also want to thank Rawd for his VR toys and Sixtoe for his great templates and of course Studlygoorite and Solters for beta testing and Jasmin Gagnon for the great basic work . And not to forget JP Salas for making the Original 'Mago of Oz' Table and TEAMTUGA for the great Pup Pack.

"Pinball Fans, Sometimes you gotta run before you can walk!" At last! Here it is! VPW are very proud to present our first blender toolkit table! This table requires at least VPX 10.7.2 and the VR version requires at least 10.8.0-514 **edit** PinMAME 3.5 is also required. (Download Links Below) Iron Man is a very hard arcade style pinball by John Borg with short brutal games and is a regular of the pinball competition circuit. Development started in September 2021, Sixtoe had talked about wanting to redo it as there was no accurate version, but the only available playfield was wrongly aligned, poor quality and there were no other decent assets for it so it was a non-starter. But whilst Sixtoe was finishing off Judge Dredd, out of the blue Bord supplied a full playfield scan including all plastics! So at this point it was all systems go, we then spent some t-shirt money on a full set of decals, Dazz got the Iron Monger toy and EBisLit got the Whiplash and Warmachine toys and Dazz 3D scanned them all in for us. A few months into development when it was playing well and being built in Blender by Sixtoe, Niwak started to make real progress with the blender toolkit, and rather than going through the process of Tomate running it through blender octane and building all the UVmaps (which takes a looong time) we decided to shift development to the toolkit version and put it on hold whilst that was developed further. A few months later when the toolkit was working well, development was picked up again on Iron Man with Sixtoe, Tomate and Niwak working together developing both the table and Niwak bugfixing the toolkit as problems arose (particularly with the Iron Monger toy!). Then just lots of testing and tweaking and here we are! Current default ROM is 1.85ve as 1.86ve does not have fastflips enabled yet. New Options Menu *WHILE IN GAME* hold the left magnasave and tap right magnasave. *Requires FlexDMD (linked below) - Light Level - Colour Saturation - Outpost Difficulty - Mech Volume - Ramp Volume - Ball Volume - Cabinet Mode (Hides Rails) - Incandescent GI (Real machine has pure white LED's, not incandescent bulbs) - Dynamic Ball Shadows - Spotlight Shadows - Ambient Ball Shadows - VR Room Choice (Minimal / Ultra Minimal) - VR Backglass (Static / Animated) - VR Sideblades (Original / Static image with no reflections) - VR Topper (On / Off) VPW Iron Man Mechanics ******************** Project Lead - Sixtoe Playfield & Plastic Scans - Bord Table Modeling - Sixtoe & Tomate Blender Toolkit Work - Tomate, Niwak & Sixtoe Lighting - Sixtoe & iaakki Fleep Sounds & Sound Scripting - Apophis & Sixtoe Iron Monger Toy - Dazz for the model & 3D scanning it, Flupper for the 3d model simplification Whiplash & Warmachine Toys - EBisLit for the models, Dazz for 3D scanning, Tomate for the 3d model simplification Iron Monger Animation Code - DJRobX, Sixtoe, iaakki, apophis, NNiwak Various fixes and script assistance - apophis, iaakki, Bord, flux, fluffhead35, Niwak Plastic Redraws - Sixtoe & Embee Iron Man Custom Topper - Rawd Backglass Image - Wildman VR Backglass - leojreimroc Desktop Background - JoePicasso Testing - Entire VPW Team VPX 10.7.2 Official Release (Required) https://github.com/vpinball/vpinball/releases/tag/v10.7.2-366-f94da1e VPX 10.8.0-514 Pre-Release (fixes for VR Users) https://github.com/vpinball/vpinball/actions/runs/3405492533 Flex DMD (Required) https://github.com/vbousquet/flexdmd PinMAME 3.5 (Required) https://github.com/vpinball/pinmame/releases ROM Iron Man Rules https://www.pinballnews.com/games/ironman/index5b.html

Thanks also here Gedankekojote97 Thanks to Sixtoe for your artwork and VR ROOM Original Table (MOD): Gedankekojote97's Table

World Cup Soccer Minimal VR Room (Bally 1994)

Gottlieb's Super Orbit! Lots of fun to play, with a varitarget, orbits, and lots of bonus opportunities. Redbone spent considerable time to get the playfield and plastic images just right, as resources for this table were very limited. As usual lots of hours were put in on this one, and lots of tweaking on the varitarget and physics to emulate a real machine. I implemented the latest VPW standards, physics, GI and shadow baking, Lampz and 3D inserts, dynamic shadows, updated backglass for desktop, roth standup and varitarget targets, standalone compatibility, sling corrections, optional DIP adjustments, updated flipper physics, VR and fully hybrid modes, Flupper style bumpers and lighting, gBOT system and trough. Redbone provided the playfield and updated the plastics and apron, and other images. Hauntfreaks provided the higher resolution VR backglass and Silversurfer updated the cab artwork. I also added options for balls, ball brightness, LUTs, Dip settings, siderails, and plenty of other VR stuff. DarthVito provided a few additional wallpaper VR Room walls. You can find the ROM at pinballnirvana.com... sorbit.zip. Also, I've included the nvram file to initially set the Dips, as the ROM creates settings that should be adjusted. You can either grab the nvram file and put it in your nvram directory, or follow this process to do an initial setup for yourself. (When you open the table, hit F6 (that'll load the default DIPS and display them). You can then select various ROM options, and I recommend these shown below. Once entered, you can exit out, and in the script, you can set the SetDIPSwitches to zero. That will set the ROM settings and turn off the option. If you later want to change that, you can turn it back on and change the dips.) - 3 ball - Playfield special of "extra ball" - Game mode of "replay" - Novelty of "normal" - Check the Match, Credits Thanks again to Redbone for the playfield and plastic images, Rothbauerw for the varitarget code, Hauntfreaks for the updated VR Backglass, DarthVito for additional VR walls, and Silversurfer for the cab art images! Also thanks to everyone else from the VPW team that provided feedback!

A version of Laser Cue VPX was originally done by Goldchicco, however in this release, most everything was done or redone once again, as the original table size was incorrect, and the playfield he used was high rez, but wasn't aligned correctly. This required me to completely redo everything like I did on Jungle Lord and Barracora. Thank you to Hauntfreaks for helping with the initial playfield image. He used his magic to get it upscaled and enhanced. I then got the text looking good, as well as various color mods. This is another early 80's Williams table like Black Knight, Solar Fire, Jungle Lord, Pharaoh, etc. This has a very basic ruleset, but good game play, Table instructions are included in the Table info section. Laser Cue is a four flipper game from 1984, and features an unusual “billiards in space”, science-fiction theme. The game is equipped with a bell that rings when billiard balls are collected or extra balls achieved. The main bank of drop targets are individually controlled, and must be collected in the indicated order to remain dropped. Extra ball play guarantees the player twenty-five seconds of play time, serving all lost balls within that time back to the shooter lane. (excerpt from Pinside). Since the table is basic, there were essentially two ways the table was set up to play... easy and hard. I have it defaulted to HARD. There is an option in the script to make it easy. (Easy mode adds a rail between the right two flippers. const FlipperGuideHard = "0" is the easy setting, and adds a guard rail between right flippers. "1" removes it. (Default is "1" / hard). Included in this Version 2.0 is Hybrid VR/desktop/cabinet modes, new upscaled playfield and plastics, VPW physics, flipper tricks, dynamic shadows, Fleep sounds, Lampz, 3D inserts, new general illumination lighting, sling corrections, drop and stand-up targets, etc. Significant time was spent on researching online videos, to ensure accuracy of shots, ball drops, and overall playability. I also created a desktop backglass with a cool lighting effect, as well as the VR backglass and other VR options. There are also some performance improvements. I would like to thank the VPW team for testing and feedback (especially Hauntfreaks, Apophis, Tastywasps, PinStratsDan and all others who tested!) Also thanks for prior assistance on items used in this table, including Tomate (lower rail prim), Goldchicco, and the rest of the VPW team! There are several options in the script. Including VR, ball brightness, LUT lighting options, and you can turn the bell off if you don't like that sound. Also, you can set the difficulty level, and the volume of the bell. The LUT changes are done by holding cntl (or left mangasave) and then while holding, scroll through the options with the right magnasave. This is a hybrid table done in VPX 10.72, and I have code in here to automatically choose between VR, desktop, and cabinet. Additional options in the script include two VR environments, a VR clock, a topper, posters, and settings for dynamic shadows if you experience a performance hit. Thanks again to the VPW team for feedback!

Thank you to Tony the Wrench who originally did this table in 2016. I was unable to reach him, however he indicated there is Full permission to mod without approval. I wanted to do this table to complete the series of the Williams early 80's tables that had the double playfields and magna saves (Black Knight, Solar Fire, Pharaoh, and Jungle Lord). I also would like to thank the VPW team for testing and feedback (especially Wylte, BountyBob, Thalamus, Astronasty, bietekwiet, leojreimroc, smaug, and PinStratsDan!)! And... an additional Thank you to leojreimroc for assisting with the VR backglass lighting! Updates in Version 2.0 done by UnclePaulie. Added VR, Desktop, and cab hybrid modes. Updated physics, drop targets, flippers, dynamic shadows, and lots of other updates to the VPW standards. Also added 3D inserts, updated lighting, the latest VPW physics, sounds, sling corrections and GI brightness and fading routines. Some other various fixes done. I also updated the desktop backglass as well as the VR backglass and other VR options. There are also some performance improvements, and I added a playfield mesh for upper and lower playfields, so there's a realistic bevel in the saucers. Significant changes were done overall, as the original table wasn't sized to the Williams era sizes. That resulted in nearly changing everything, lights, walls, ramps, etc. There are several options in the script. Including VR, ball brightness, and LUT lighting options. Since this table heavily relies on the usage of the magnasave buttons, the LUT changes are done by holding cntl (or left mangasave) and then while holding, scroll through the options with the right magnasave. This is a hybrid table, and it will automatically choose between desktop and cabinet, however, if you are playing in VR, you MUST change VR_Room to 1 in the script. Additional options in the script include two VR environments, a VR clock, and settings for dynamic shadows if you experience a performance hit. Thanks again to everyone that tested, provided feedback, and assisted!

Thank you to 32assassin for giving me permission to update this table! Also thank you to the VPW team for testing (especially Thalamus, Apophis, Bord, Rothbaurerw, leojreimroc, Sixtoe, and PinStratsDan)! Pharaoh (Williams 1981) is one of the four double playfield machines designed by Williams in 1980-81 (others are Black Knight, Jungle Lord and Solar Fire). It heavily uses the magna saves, and has lots of drop targets and other things to shoot for. Like Solar Fire, the captive ball is a tough shot, and there are other "tombs" that you can shoot the ball into. Updates in Version 2.0 done by UnclePaulie. Added VR, Desktop, and cab hybrid modes. Updated physics, drop targets, flippers, dynamic shadows, and lots of other updates to the VPW standards. Also added 3D inserts, updated lighting, the latest VPW physics, sounds, sling corrections and GI brightness and fading routines. Some other various fixes done. I also updated the desktop backglass as well as the VR animated backglass and other VR options. There are also some performance improvements, and I added a playfield mesh for upper and lower playfields, so there's a realistic bevel in the saucers. There are several options in the script. Including VR, ball brightness, and LUT lighting options. Since this table heavily relies on the usage of the magnasave buttons, the LUT changes are done by holding cntl (or left mangasave) and then while holding, scroll through the options with the right magnasave. This is a hybrid table, and it will automatically choose between desktop and cabinet, however, if you are playing in VR, you MUST change VR_Room to 1 in the script. Additional options in the script include two VR environments, a VR clock, and settings for dynamic shadows if you experience a performance hit, Thanks to everyone that helped!

Originally done by mfuegemann, and then version 102a released by:Goldchicco & 32assassin. Thank you to Goldchicco for giving me permission to update this table! Also thank you to Apophis, Wylte, Smaug, and PinstratsDan for testing and feedback! This is a lower production 80s Williams table, but LOTs of fun to play. There is a lot to do on this table with all the targets to hit to enable other functions. You'll find similarities to Black Knight, Grand Lizard, and other tables of that era. This table significantly utilizes magnasaves to keep your ball from going into the outlanes. (see the rulesheet I typed up in the table info section for how to enable that and more). Updates in Version 2.0 done by UnclePaulie. Added VR, Desktop, and cab hybrid modes. Updated physics, drop targets, flippers, dynamic shadows, and lots of other updates to the VPW standards. Also added 3D inserts, updated lighting, the latest VPW physics, sounds, sling corrections and GI brightness and fading routines. Some other various fixes done, including a lot of work on the solar gun operation. I also updated the desktop backglass as well as the VR backglass and other VR options. There are also some performance improvements, and I added a playfield mesh for upper and lower playfields, so there's a realistic bevel in the saucers. There are several options in the script. Including VR, ball brightness, and LUT lighting options. Since this table heavily relies on the usage of the magnasave buttons, the LUT changes are done by holding cntl (or left mangasave) and then while holding, scroll through the options with the right magnasave. This is a hybrid table, and it will automatically choose between desktop and cabinet, however, if you are playing in VR, you MUST change VR_Room to 1 in the script. Additional options in the script include two VR environments, a VR clock, and settings for dynamic shadows if you experience a performance hit, Thanks to everyone that helped!

Laser War! This table was originally done by Herwey (with help from others noted in the script), and he gave me the permission to add all the latest physics, sounds, etc. to this fun table. Thank you very much, Herwey! It's a fun yet challenging table. Testers have indicated that the balls falling to the drain is tough, but acts identical to a real table. So, you might need to work on your nudging technique to save the ball from draining. I did quite a few updates in version 2.0 mentioned below (and detailed in the vpx script), essentially getting up to the latest VPW physics and sounds, 3D inserts, and other corrections, and making it a hybrid table (desktop, cabinet, and VR). Also thank you to all the testers on the VPW team for testing, feedback, and suggestions for improvement: Tomate (fixed ramp and wall primitives), Sixtoe (upper right wall placement), leojreimroc (VR backglass enhancements), and then AstroNasty, PinStratsDan, Smaug, and Rajo Joey for testing and feedback! If you are playing in VR... you MUST select VR_Room = 1 in the script!! Desktop and Cabinet mode should be automatic. There are several options to select in the script, including ball brightness, sidewalls and blades, color mods, GI and Flasher options, VR Room, VR clock, VR posters, VR topper. GI mods and ramp color can be changed by clicking the right and left magna save buttons if you have that option on in the script as well. IF YOU experience performance issues... there are options you can try to change that. First of all, you can uncheck "Reflect Elements on Playfield in the table options window. Also, you can turn dynamic shadows off for additional performance if needed. Also, you can turn off In-Game AO, Post-proc AA, and 4xAA on the table options. Version 2.0 Updates include: - Implemented the table to a hybrid (desktop, cab, and VR), and has options for ball brightness. - Added VR to include an animated backglass (image from Wildman), and several VR options (room, poster, clock, topper). (Thanks to Sixtoe's VR templates). Also animated all the flippers, plunger, etc. And thanks to leojreimroc for backglass enhancements. - The table and flipper physics have been updated to the latest VPW standards, as well as dynamic shadows, standup targets, ramprolling sounds, sling corrections, and several other tweaks. - Fleep sounds added, as well as relay sounds. - Added Flupper domes. - Adjusted the flippers to be actual size, and tweaked the flipper physics. - Added 3D insert primitives and tuned the lighting significantly for those. Lots of work on the playfield cutouts, and associated text layer. - Changed lamp control to VPW Lampz. - Corrected some errors in the table. - Adjusted the lighting levels, and GI overhead. - Tomate fixed an issue with the ramp and wall primitive... as it wasn't built correctly in blender. - Enhanced performance as much as I could by removing all getballs calls and no longer destroy and recreate balls. I implemented only the gBOT global call. - Updated the trough code to manage all balls on the table. - Created new background for desktop mode, with animated lighting. - And so many other updates, all documented in the script. Once again thank you to Herwey, the VPW team, especially Tomate, AstroNasty, Sixtoe, PinStratsDan, Smaug, leojreimroc, and Rajo Joey for testing, feedback, and some updates!