Jump to content

Blashyrk

Supporting Member
  • Posts

    144
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Blashyrk

  1. Blashyrk

    Blashyrk

  2. @fren did you name the rom acd_168c? and do you have the latest vpinmame.dll from Lucky1?
  3. Awesome where do I find the vpinmame version ?
  4. Ahhh, you renamed them to shields. I thought maybe you were working on something to fix the dreaded green dots or to shield the pin2dmd from interference.
  5. @unclesash - What's this shield thingy you are working on?
  6. I'll post my cabinet.xml file tomorrow
  7. There's something fishy with my setup, I'm gonna hook up my 5 rgb flasher bar just so I can finish my cabinet and after a while come back to the addressable leds strips and see if I can get it to work. Thanks for your help swisslizard
  8. Ledstrip PF right - 60 leds direction front to back PF Back - 6*32 leds rows Bottom to top, columns with rows arranged right to left PF Left 60 leds - Direction Back to front <LedStrip> <Name>BackBoard</Name> <Width>32</Width> <Height>6</Height> <LedStripArrangement>LeftRightAlternateBottomUp</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>61</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>TeensyStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>Sideboard Right</Name> <Width>1</Width> <Height>60</Height> <LedStripArrangement>BottomUpRightLeft</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>1</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>TeensyStripController</OutputControllerName> </LedStrip> <LedStrip> <Name>Sideboard Left</Name> <Width>1</Width> <Height>60</Height> <LedStripArrangement>TopDownLeftRight</LedStripArrangement> <ColorOrder>GRB</ColorOrder> <FirstLedNumber>312</FirstLedNumber> <FadingCurveName>SwissLizardsLedCurve</FadingCurveName> <OutputControllerName>TeensyStripController</OutputControllerName> </LedStrip>
  9. Thanks swisslizard, I got the ledstrips to actually turn on but they light up in the wrong place .. In the cabinet xml when you define first led number i'm not sure how calculate it.. Ive got 60 leds on each side and 192 (32x6) on the backboard.. I have connected the right side strip to the teensy controller
  10. Hello, I'm having problems with my ledstrip controller, I think i did the configuration right but it won't work, I have setup a global config and the configs get loaded. I check the dof log and i says : Warning: Direct Strip Controller with number 1 not found. Device manager shows Teensy USB serial (Com8) is correctly installed (flashedwith hex file form swiss) do i need more drivers?
  11. When injecting power to the strips at different "points", do you connect the 5v and ground line from the previous strip or just the data line and then get 5v and ground from the psu?
  12. Randr could you please post some pictures of your addressable led setup?? How did you wire the ledstrips? And how you made the led matrix,how did you attach the tinted plexi, where did you route the wires and such? That would be much appreciated.
  13. @rappelbox I already got the card reader, so if you could just ship mine without that would be fine
  14. Blashyrk: 1x set 2 (Board assembled and tested) + shipping to Norway
  15. Thanks swisslizard, I'll try to wire it this way
  16. Will 18awg wire be safe to supply 5v to the leds? Or should I use even thicker wire?
  17. I used Arduino Ide, I get no errors during the programming so maybe it's ok.
  18. When I program the teensy with the Hex file i get a error when checking the verbose information log Error can't load ***********.elf .. there is no *.elf file included in the firmware download
×
×
  • Create New...