Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
breikers

PIN2DMD real pinball machine ?

Recommended Posts

Hi,  I have been using a PIN2DMD display in a Virtual Pinball. I would like to use this PIN2DMD in my real pinball Machine. Stern whitestar system.  Is there a tutorial available for connecting this to power etc ? I can't seem to find it. Any help is appreciated.

 

Share this post


Link to post
Share on other sites
13 minutes ago, breikers said:

Hi,  I have been using a PIN2DMD display in a Virtual Pinball. I would like to use this PIN2DMD in my real pinball Machine. Stern whitestar system.  Is there a tutorial available for connecting this to power etc ? I can't seem to find it. Any help is appreciated.

 

https://pin2dmd.com/hardware/

Share this post


Link to post
Share on other sites

Hi Lucky. Thanks for your reply. Where can i download the pin2dmd.exe ?  Can't find the link on pin2dmd.com

Share this post


Link to post
Share on other sites

Ok found it on vpuniverse. I will look into it. Thank you for your reply

Share this post


Link to post
Share on other sites

Empty link ? Refers to github, but no such page. I am very confused which files to use etc. 

Share this post


Link to post
Share on other sites

Hello! I'm continuing reading and dealing with the instlaation. I have updated the board, I put the key on the SD the files of the colored display of the Street fighter II Gottlieb and configured the options with gottlieb V2 and enhancer on. When I plug  the pin2dmd on the machine I only can see the Gottlieb V2 and nothing else. I don't know what I'm doing wrong or I f a need another files on the sd. With the pin2dmd.exe I selected the same option. I already tested with Gotlieb V3 with the same result.

I really apprecite your help.

Share this post


Link to post
Share on other sites

If your display is stuck on the splash screen it means that my software is not getting valid data. Most likely a hardware problem. Please run the input test as described on pin2dmd.com

Share this post


Link to post
Share on other sites

pin 9 and pin 13 are open. 🥺 for sure they will be important and there isn't a cheap solution 😭

Share this post


Link to post
Share on other sites

Did you read "It displays which of the input pins 1,3,5,7,11 (and 13 for Nucleo and EVO boards) " ??

If it is a discovery based shield that is o.k. Which hardware do you have ? Could it be it is a PinballSP DMDST32 board ?PinballSP did not populate all necessary circuits to save some money. Please make a picture.

Share this post


Link to post
Share on other sites

I have standar DMD from ali expres. It's extrange because now I see the picture in black and white.   I enclose a picture of the seller and my hardware. Thanks.

20200712_111114.thumb.jpg.5278f4abfe0d8f2fcfd35fec538b85c5.jpg20200712_111045.thumb.jpg.689e995cf3826f098fd86f2abe82b9d1.jpgU4b9e78ace15446e99cfae534f872f3681.jpg.ec5253eecce33c93aae9403503edf90c.jpg20200712_111414.thumb.jpg.2e41bdbd49cbfc763ca681e795b108ad.jpg

20200712_111353.jpg

Share this post


Link to post
Share on other sites

Yeah! I just solded the resistence form the old Shield and worked 😭 I thought I will never see it working!. IN-CRE-DI-BLE!!

I still have to fix the plunger becuasue it looks its small and the ball never exit the ramp. But this is another story. I can see the scores.

Thanks for the support! 💓

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...