Mgkush Posted April 5, 2019 Share Posted April 5, 2019 Can you please help me out with a tutorial from start to end of pin2dmd I just get my dmd and I’m lost in the installation.... i got the key but I do t understand much the instructions please if someone can help me out I will aprecciate ...pin2dmd came with last firmware update too Link to comment Share on other sites More sharing options...
outhere Posted April 5, 2019 Share Posted April 5, 2019 Did you check Google, Did you click on the (pic) pin2dnd at the top of the page What have you tried? Link to comment Share on other sites More sharing options...
Content Provider malenko Posted April 5, 2019 Content Provider Share Posted April 5, 2019 put the keyfile on a micro SD card. put the card in the pin2dmd. Link to comment Share on other sites More sharing options...
Mgkush Posted April 5, 2019 Author Share Posted April 5, 2019 Ok ...I did finish that step and I did put the card in..so far I don’t see the numbers on the panel...I did try to run a table but pin2dmd still on screen Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 Info https://pin2dmd.com/installation/ http://vpuniverse.com/forums/topic/3370-attack-from-mars-colorization/?page=3&tab=comments#comment-42753 https://vpinball.com/forums/topic/masters-of-the-universe-vpx-pup-pack-royal-boob-edition/page/3/#post-104546 Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 4 hours ago, Mgkush said: Ok ...I did finish that step and I did put the card in..so far I don’t see the numbers on the panel...I did try to run a table but pin2dmd still on screen When you 1st turn your pin2dmd on, If it gives you the version number and never asked for the key code that part should be done.... From what I remember if the key code is not in it will work for 3 minutes and then ask for the key code Here's how to get it up and running. Download zadig from here... https://zadig.akeo.ie/ Install zadig. Got to this link, skip to step 2 to install the libusb drivers. http://pin2dmd.com/installation/ 4.Once you get the libusb drivers installed, you can start vpinmame setup and set the "use pindmd" checkbox. If you need more help with this step, Post screenshot. Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 Please can you email me screen shots? im sorry man I’m being away from computers for a while .. [email protected] since now thank you very much Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 screen shots of What? Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 where is located vpinmame set up Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 In the Vpinmame forlder Visual Pinball\VPinMAME Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 Ok I have ...setup and setup64 I have to double click to any of those right Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 Here is my dmddevice.ini file dmddevice.ini Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 setup Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 You will want to be up-to-date on this Each time you install new version right click the Set up file in the VPinMame folder and run Administrator Install this VPinMAME_3_2_beta.zip <--- it's been a while do this one 1st, Then do the One below https://www.vpforums.org/index.php?showtopic=27063&hl= Then official rev 4730 - At the bottom of the 1st post http://vpuniverse.com/forums/topic/3651-sambuild32-beta-thread/ Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 Ok I copy the set up you have ...I did double click on setup ...And nothing came up to make the dmd work ...I start a table and pin2dmd still on...son I will smash it on the floor lol Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 ok I did download the new version 3.2 so what I do now ? just install the new version? man im so lost in this,,,,i think I will quit Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 I'm none of those things you mentioned in the other post So if I could get it working, So can you... Well maybe take a break till tomorrow... I bought mine from dpanell2 too and he's an excellent seller 1 - When you 1st turn your pin2dmd on, If it gives you the version number and never asked for the key code that part should be done.... ---- If not what is it doing And then look like the picture 2 - You did this ---> Here's how to get it up and running. 3-You did this---> In your VPinMame folder run set up change defaults or Use F1 during game to change the default for that game Turn off Show DMD and Turn on external DMD Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 i don't have the code anymore....so we are good i think on that... Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 On mine I have 2 different spot I can plug the USB Mini cable into make sure you have it in the right one.... I believe if I'm standing at the pinball machine by the flippers and looking at the DMD it would be on the back side on the right... But your DMD may be built different than mine Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 I have a micro usb and other usb connector by the ethernet port,,,,i have connected with the micro usb Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 one is the regular micro usb and the other usb connetion I never see before Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 Mine looks like this Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 is just exactly like mine....I re-install visual pinball,i did notice when I restart the cabinet the dmd light up showing the firmware version and change again to virtual pinball logo... i did install with support for pin2dmd ,in the options setup i mark cabinet mode,i did hide Show dmd/display window and i mark use externall DMD dll,i try to start a table and i have a window saying pin2dmd not found and of course table is not working...im etting close?lol Link to comment Share on other sites More sharing options...
Mgkush Posted April 6, 2019 Author Share Posted April 6, 2019 after a long battle with the DMD and SET up finally I make it run...thank you very much to all specially you OUTHERE!! Link to comment Share on other sites More sharing options...
outhere Posted April 6, 2019 Share Posted April 6, 2019 Glad to see you have it working.... What was causing it not to work? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.