DarenHawes Posted March 25, 2019 Share Posted March 25, 2019 Hi All I have been trying to figure this out now for a few weeks. I have to reach out for help. Here are the facts I have a Teensy that works well with Arduino testing. It is on COM3 as per the screen shot attached. It works when I test the Example files so COM3 is a goer. I have flashed the ROM on Teensy from https://github.com/DirectOutput/TeensyStripController/releases by downloading the file, opening in the TeensyProgram, pressing auto and loading the file and it says OK to reboot. Teensyprogramming.png I have unblocked all DLLs I have installed DOF under c:/directoutput I have removed DofLinx until I can get it sorted I dont have ANY other devices other than the Teensy I have am using all channels of Teensy. 71 x 6 (channels 1-6) for Matrix and 2 x 71 (channels 7 & 8 ) for right and left sides. Tried with Firewall On/Off - Re-installed Windows 10 My only hunch is that the flash of Teensy did not work?? Here is the issue Check out the video - 1. I open the Config tester and select the GlobalConfig_B2sServer.xml file and it opens 2. I then try to open Cabinet and it crashes with this error. 2019.03.25 14:22:31.665 Initializing cabinet 2019.03.25 14:22:31.665 Debug: Initializing output controllers 2019.03.25 14:22:31.681 TeensyStripController TeensyStripController intialized and updater thread started. 2019.03.25 14:22:31.681 Debug: Output controllers initialized 2019.03.25 14:22:31.697 TeensyStripController TeensyStripController updater thread started. 2019.03.25 14:22:31.697 Cabinet initialized 2019.03.25 14:22:31.697 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml 2019.03.25 14:22:31.728 Framework initialized. 2019.03.25 14:22:31.728 Have fun! 2019.03.25 14:22:32.337 EXCEPTION: TeensyStripController TeensyStripController updater thread could not connect to the controller. Thread will quit. 2019.03.25 14:22:32.337 EXCEPTION: Thread: TeensyStripController TeensyStripController updater thread 2019.03.25 14:22:32.337 EXCEPTION: Message: IOException --> The semaphore timeout period has expired. 2019.03.25 14:22:32.337 2019.03.25 14:22:32.337 2019.03.25 14:22:32.337 EXCEPTION: Stacktrace: at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str) 2019.03.25 14:22:32.337 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.EndWrite(IAsyncResult asyncResult) 2019.03.25 14:22:32.337 EXCEPTION: Stacktrace: at System.IO.Ports.SerialStream.Write(Byte[] array, Int32 offset, Int32 count, Int32 timeout) 2019.03.25 14:22:32.337 EXCEPTION: Stacktrace: at System.IO.Ports.SerialPort.Write(Byte[] buffer, Int32 offset, Int32 count) 2019.03.25 14:22:32.337 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.AdressableLedStrip.TeensyStripController.ConnectToController() 2019.03.25 14:22:32.337 EXCEPTION: Stacktrace: at DirectOutput.Cab.Out.OutputControllerCompleteBase.UpdaterThreadDoIt() 2019.03.25 14:22:32.353 EXCEPTION: Targetsite: Void WinIOError(Int32, System.String) If anyone can help that would be AMAZING! Its the last bit to this little mission! Daren DirectOutput.log directoutputconfig30.ini GlobalConfig_B2SServer.xml GlobalConfig_PinballX.xml Cabinet.xml Link to comment Share on other sites More sharing options...
lurch64 Posted March 28, 2019 Share Posted March 28, 2019 i would disconnect all make one cabinet file to check the teensy and with one strip only connected ,, that would proove teensy for you to start with if they all light white when starting then you need to bridge pin 15-16 on teensy,,, try that firstly also you say you installed dof as I have installed DOF under c:/directoutput i assume you meant backslash not forward C:\DirectOutput just use the first cat port and just the one connector on white/whiteorange test it there first Link to comment Share on other sites More sharing options...
outhere Posted March 28, 2019 Share Posted March 28, 2019 These are my files, I have 3 strips hook up http://vpuniverse.com/forums/topic/3896-dof-doflinx-teensy-addressable-leds-prob/?tab=comments#comment-42561 Link to comment Share on other sites More sharing options...
ericcsgmu Posted July 27, 2019 Share Posted July 27, 2019 Did you ever resolve this? I just got my teensy plugged into my cab and Freeze dll does not work and when exiting a vpx game everything locks up. What could be wrong on my end? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.