DarenHawes Posted March 7, 2019 Share Posted March 7, 2019 Hi all I wish to create an 8 strip RGB LED array using Addressable LEDs, Teensy and DOF. I see Teensy is Tiny! Does anyone know where I can get a more robust solution (that can be mounted in cabinet) with maybe PSU for the 3.3 v? Or is that part of the fun? Link to comment Share on other sites More sharing options...
DarenHawes Posted March 7, 2019 Author Share Posted March 7, 2019 Need not say anymore Link to comment Share on other sites More sharing options...
Westworld Posted March 7, 2019 Share Posted March 7, 2019 just mount it on the Octo2811 adapter, you need that anyway. And magic, now it is 4 times bigger ! Great, isn't? And yeah, there are holes allowing you do use screws to mount to your cabinet. Power supply via USB from computer, done. Link to comment Share on other sites More sharing options...
DarenHawes Posted March 8, 2019 Author Share Posted March 8, 2019 Its very cool indeed. I have one question though. I will be having the strips down the side and the matrix at the back. Are the strips down the side and back matrix two different data circuits or do I wire them all together? If so will one Octo2811 and one Teensy do it? If I wire them all together is there a certain direction I need to go? For example starting at the plunger then zig zag across the matrix then down to the to the side near the start button? Does that make sense? Hope this makes sense Lol! Link to comment Share on other sites More sharing options...
outhere Posted March 8, 2019 Share Posted March 8, 2019 You can Daisy chain them together or Separate as far is the data single... will one Octo2811 and one Teensy do it? ---> YES My setup https://www.vpforums.org/index.php?showtopic=36156&page=14#entry421761 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.