dpannell2 10 Report post Posted August 24, 2018 I ordered some parts a while ago to build a few displays for my machines. I decided to make up a few extra displays with the parts I have left. I've sold a few here and I have a few left. PM me if you have any interest. The displays have the SD card reader, no wifi. I also have some shields and power supplies and frames. While they last... 2 lucky1 and NetzZWerg reacted to this Share this post Link to post Share on other sites
cb3 210 Report post Posted August 26, 2018 Dan got me setup with three devices and they were all TOP NOTCH QUALITY and LOOK AMAZING! He ships fast and also helps with setup if you need, I highly recommend him if you need a pin2dmd! 1 NetzZWerg reacted to this Tip Share this post Link to post Share on other sites
tiim 0 Report post Posted August 30, 2018 I just received a completed kit from Dan. He shipped it quickly and was there for me when I had questions. I'm new to this forum, but I can say I'm sure glad I found it! Tiim Share this post Link to post Share on other sites
EddCase 0 Report post Posted August 31, 2018 Dan Shipped to me and was wonderful at answering all my questions. I cannot praise him enough. It did seem to go missing for a while and he offered to send me out a replacement. Thankfully it started showing up on tracking again. This was shipped to the UK. Thanks again Dan really quality soldering job and everything works flawlessly Share this post Link to post Share on other sites
delt31 3 Report post Posted October 5, 2018 Another happy customer - I received the pin2dmd in no time works perfect thanks! 1 lucky1 reacted to this Share this post Link to post Share on other sites
dpannell2 10 Report post Posted October 20, 2018 Thanks everyone for the feedback, much appreciated. I still have some complete displays and parts left. Please send a PM if you need something. Share this post Link to post Share on other sites
outhere 41 Report post Posted October 28, 2018 I paid for it on August 24th had it in hand on August 27, very fast shipping I now have it installed and works perfectly, very helpful with questions Share this post Link to post Share on other sites
adamcian 1 Report post Posted November 16, 2018 Ordered my DMD from Dan after a quick DM convo and got it within 2-3days, SUPER well packed and ready to rock once I activated it with Lucky1. Worked right away and have been working through the config side since getting it ready for my VPin cab: 1 dpannell2 reacted to this Share this post Link to post Share on other sites
dpannell2 10 Report post Posted November 21, 2018 Hi Adam, Glad you got it running. Please post some pics once you get it up and running in your cabinet. Share this post Link to post Share on other sites
malenko 306 Report post Posted January 1 Its great to order something and get it a few days later. I really appreciate the fast shipping dpannell2 1 1 BambiPlattfuss and adamstillman reacted to this Tip Share this post Link to post Share on other sites
dpannell2 10 Report post Posted January 3 Hi Malenko, Thanks for the nice feedback. Thanks for all the great colorization work you have done. I'm looking forward to seeing your next project! 1 2 malenko, BambiPlattfuss and adamstillman reacted to this Share this post Link to post Share on other sites
Gwen 13 Report post Posted January 5 I ordered a pin2dmd from Dan and had it installed in my cabinet just a few days later (and I live across the continent from Dan). I have to say the build work is extremely professional and I have had no problems at all with it! It took me a day or so working on configuring the software to run with all the different pinball apps I'm using but the results are just beautiful. I will post a few photos and maybe a video of my cab with the pin2dmd running in a few days. I am currently doing a bit of work on finishing detailing on the cabinet and would rather get the images when it's finished. Thanks again Dan, great job! Gwen Share this post Link to post Share on other sites
Thalamus 220 Report post Posted January 5 I live in Europe and the day after I've picked up the parcel. Dan contacted me asking if everything was ok. For anyone that is looking for a pre-built Pin2dmd. You will be very lucky if Dan is still making these. Both looked and feels like a professional build. That's all I have to say about the matter. 1 1 NetzZWerg and dpannell2 reacted to this Share this post Link to post Share on other sites
dpannell2 10 Report post Posted January 5 6 hours ago, Gwen said: I ordered a pin2dmd from Dan and had it installed in my cabinet just a few days later (and I live across the continent from Dan). I have to say the build work is extremely professional and I have had no problems at all with it! It took me a day or so working on configuring the software to run with all the different pinball apps I'm using but the results are just beautiful. I will post a few photos and maybe a video of my cab with the pin2dmd running in a few days. I am currently doing a bit of work on finishing detailing on the cabinet and would rather get the images when it's finished. Thanks again Dan, great job! Gwen Thanks Gwen, Glad you got it installed. I would love to see some pics once you get everything sorted with your build. Share this post Link to post Share on other sites
Gwen 13 Report post Posted January 9 Ok I finally shot some photos of the cabinet as promised. You can see the brass inlay work I did earlier this week on the lockdown bar in the last photo. That took several days and a lot of freaking work. I still need to re-stain the lockdown bar darker. I also replaced my dmd monitor with the PIN2DMD with which I am extremely happy 😃 Gwen 2 dpannell2 and NetzZWerg reacted to this Share this post Link to post Share on other sites
NetzZWerg 414 Report post Posted January 9 That looks really great and unique! Tip Share this post Link to post Share on other sites
Gwen 13 Report post Posted January 9 8 hours ago, NetzZWerg said: That looks really great and unique! Thanks 😃 Share this post Link to post Share on other sites
dpannell2 10 Report post Posted January 9 Very cool! Love that backbox and lockdown bar. You are an artist! Share this post Link to post Share on other sites
zeenon 4 Report post Posted January 21 Just another vote for Dan if you're in the market for a pin3dmd in the US. I ordered Friday and it was on my door step by Monday. Dan answered all my questions and checked in to make sure every thing was working!!! Z 1 1 dpannell2 and Thalamus reacted to this Share this post Link to post Share on other sites
dpannell2 10 Report post Posted January 27 Thank You Bill, it looks great in your cabinet. The spider man colorization looks especially good. I need to get that one on my machine. Share this post Link to post Share on other sites
slippifishi 78 Report post Posted 2 hours ago And another satisfied UK purchaser here - thanks Dan! Excellent quality unit and no problems getting it set up and working fine with 220v, no further modification required! I will be using it mostly with my desktop for real time previews and play testing, but I may eventually migrate it to my pincab, who knows... 1 Thalamus reacted to this Share this post Link to post Share on other sites