Jump to content

EXCEPTION: Could not parse setting S12W16 in column data S12W16//W41|W42|W43|W44 60 I48/E103 60 I48.


Guest mrmul8r

Recommended Posts

Guest mrmul8r

I've just finished building a fairly basic DOF enabled (8x solenoids, knocker & shaker) cab and installed DOF R3++ edition.

Everything seems to be working properly in VPX, however, I'm getting the following error(s) in my DirectOutput log file:

EXCEPTION: Could not parse setting S12W16 in column data S12W16//W41|W42|W43|W44 60 I48/E103 60 I48.

Initially, I thought these errors were table specific? But now realise I'm getting the same error(s) for all tables.

More specifically:

Warning: Previous exceptions occured in the line nautilus,W11 Red f200/W25 Green f200,W12 Red f200/W16 Red,W13 Red f200/W15 Green,W17 Yellow,W48 Forest_green/E101 Red f200,S1 300/S4 300/S5 300/S7 300,0,S5,S12W16//W41|W42|W43|W44 60 I48/E103 60 I48,S4/S6 60/S6 60 Invert/S7/S11/W17/W35|W36|W37|W38 60 I48/E104 60 I48,W15,0,0,0,0,S3/S46,S48/E105,S1,0,0,0,0,0,0,0,ON Red,0,0,0,S5,S12W16//W41|W42|W43|W44 60 I48/E103 60 I48,S4/S6 60/S6 60 Invert/S7/S11/W17/W35|W36|W37|W38 60 I48/E104 60 I48,S3/S46,S48/E105,W15,0 of the ledcontrol file

So seems to have something to do with "nautilus"?

I did notice that instead of the following in my directoutpuconfig20 file...

S12W16//W41|W42|W43|W44 60 I48/E103 60 I48

I have...

S12/W16/W41|W42|W43|W44 @dt@/E103 @t@

So 60 I48 has been replaced by @dt@ and @t@, but I don't understand what it means?

Anyway, I haven't a clue how to fix this?

Perhaps this is nothing to worry about?

Any help would be GREATLY appreciated because I'm really struggling.

One other thing... Could someone please explain how to customise the "PinballX" line in my directoutputconfig20 file please? I understand how to edit it, I just need a list of available options if that makes sense? 

The guide I've read (DOF WIP) only gives 3 examples?

Thanks in advance!

Link to comment
Share on other sites

  • Content Provider

well, i don't see a problem at the config of nautilus, for @dt@, or @t@, the values are taken from targets and drop targets drop down lists, ee image attached and they are replaced at runtime of DOF, in my case for example  @t@ is replaced by 300 I32, 300 ms and intensity of 32 (min = 0 and max 48)

please show the top of the dof logs to see the DOF version you use and your user in the configtool so i can see your setup

 

Untitled.png

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
  • Create New...