CptCheesycrust Posted February 12, 2018 Share Posted February 12, 2018 Hi, i have a "PinControl1" which is controlled via DOF as a "ledwiz". Solenoids, Analog-Plunger, LED Stripes, Everything works perfectly, only the Shaker Motor makes problems. Once activated, it does not turn off anymore. This happens at all tables. I asked the manufacturer of PinControl for help. He said, he now this error, "but it's an error in the implementation of the DOF script", and has no solution. :-/ Maybe someone of you? If it helps, THIS is my Port Assignments and THIS is my DOF Config Folder. DOF.log shows no error. Link to comment Share on other sites More sharing options...
outhere Posted February 12, 2018 Share Posted February 12, 2018 On the DOF configure tool website under my account where it says LEDwiz framework make sure that is set to directoutput... If it needs changing download the files after changing and try again Link to comment Share on other sites More sharing options...
CptCheesycrust Posted February 12, 2018 Author Share Posted February 12, 2018 Hi, thx for the help. But that's not the solution. Framework is set to directoutput. Link to comment Share on other sites More sharing options...
randr Posted February 13, 2018 Share Posted February 13, 2018 Try a different port maybe it’s shorted Link to comment Share on other sites More sharing options...
CptCheesycrust Posted February 13, 2018 Author Share Posted February 13, 2018 Tested and, did not help. :-( Link to comment Share on other sites More sharing options...
outhere Posted February 13, 2018 Share Posted February 13, 2018 It sounds like you have a controller board for the shaker motor, might be a bad controller board... Link to comment Share on other sites More sharing options...
Rappelbox Posted February 13, 2018 Share Posted February 13, 2018 Return it and get a Pinscape for the same price! Has way more outputs, inputs and can drive almost everything out of the box. Additionally you don’t need an extra ledwiz etc for additional toys. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.