psmmacker Posted November 11, 2017 Share Posted November 11, 2017 hi guys i asked the designer of pindmd v2 maker if we could flash he code on to the stm32 discovey and io pins from the hex data to be feed in to a raspberry pi zero pins as dr pinball said it may be too slow and needs to be 100mhz to improve timing issues i can only get 80 frame rate a second on pindmd itself i know pin2dmd uses a bin but the pindmd uses a dfu type firmware regards paul Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.