breikers Posted June 13, 2017 Share Posted June 13, 2017 Hi I want to use a pin2dmd display with my Stern T3 real pinball machine. I read some artikels on the forums, but i don't understand fully. The DMD Controller in my machine uses a DMD Rom chip. Do I need the DMD driver board (like the colorDMD display) ? If not how do I get the required files to use the display as a replacement (even if not using colors) ? This topic is propably discussed but i cannot find it. Excuse my ignorence Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted June 13, 2017 Content Provider Share Posted June 13, 2017 read at pin2dmd.com Link to comment Share on other sites More sharing options...
ibjeepin Posted June 14, 2017 Share Posted June 14, 2017 You still need your dmd controller. Think of this project as a replacement part to a DMD screen albeit color. All of the programming and stuff disussed in these forums is all about the programming of the display to support color conversion of the 4 color dmd code coming from the controller. Link to comment Share on other sites More sharing options...
ibjeepin Posted June 15, 2017 Share Posted June 15, 2017 Breikers, see pic Link to comment Share on other sites More sharing options...
breikers Posted June 15, 2017 Author Share Posted June 15, 2017 Thanks guys. This explaines alot ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.