Output Shield For Arduino Leonardo "led Wiz Clone"

[UncleSash]

Hello Pinball Folks!

 

Here is Sascha.... the #Pin2DMD Shield Hardware Designer.

 

Here is another nice Shield for the LWClone2U Project.

 

As DIY Set, Soldered Set, Single Parts or complete Set with Arduino Leonardo

 

Maybe someone likes it and want to buy one or more.

I made that Shield usually for myself as HIGH Current OUTPUT Driver Shield.

You can connect everything to it!

Shaker, Becan, LED, High Power LED's, Solenoids, etc.

 

For use with any Inductive Load I recommend you my "Flyback Diode Shield" http://vpuniverse.com/forums/topic/2607-flyback-diode-board-for-solenoids/#entry29621

 

Tech Specs:

• 22 High Current Output Channels
• each Channel can run on a Different Voltage
• all components are THT (Through-hole technololgy) for aesy self repair
• easy to Install

 

Here some nice Pictures from the Shield:

 

Attached to the Leonardo Board:

 

Test with RGb Strips:

 

 

And now the Pricing...

Oh no, not to expensive!

Check the Parts and you see, it is not to expensive!

 

Partlis / BOM:

Leonardo OUT PCB - Partlist.pdf

 

I am not a professional Salesman... this is still a Hobby!

 

 

Set: Soldered PCB

• 4.00 USD = 1x PCB rev 1.0
• 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive)
• 5.00 USD = 1x Soldered
• 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw)

 

Total:

30.00 USD

 

+ Shipping with USPS (rates on request, starts with 4.00 USD)

 

 

 

Set: Complete PCB with Arduion Lenardo

• 9.00 USD = 1x Arduino Leonardo (with FREE LWClone2U Firmware)
• 4.00 USD = 1x PCB rev 1.0
• 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive)
• 5.00 USD = 1x Soldered
• 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw)

 

Total:

39.00 USD

 

+ Shipping with USPS (rates on request, starts with 4.00 USD)

 

 

 

Set: PCB DIY

• 4.00 USD = 1x PCB rev 1.0
• 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive)
• 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw)

 

Total:

25.00 USD

 

+ Shipping with USPS (rates on request, starts with 4.00 USD)

 

 

 

Parts ONLY  - select here what ever you need and send me a PM with you wishes!

• 4.00 USD = 1x PCB rev 1.0
• 19.00 USD = 1x ALL Parts (check the Partlist and compare when you think it is to expensive)
• 2.00 USD = 1x 4 PCB Stand-Offs for easy mounting (incl. 4x M3 Screw, 4x Wood Screw)

 

+ Shipping with USPS (rates on request, starts with 4.00 USD)

 

 

And when anybody needs any Kind of PCB, just contact me.

We can Design one and I made the Rest for you!

 

Cheers

Sascha

[martymoose69]

hi got the boards today all fine

 

where can i get the LWClone2U Firmware  on Github?

 

cheers

[UncleSash]

I will upload the code tonight.

And post the link here