mgpasman Posted May 16, 2016 Share Posted May 16, 2016 I have my display built in my Getaway, the USB cable is easily accessible from the cabinet, but to access the SD I have to open the backbox every time. That gets old real quick . As I am getting ready to dive into the coloring, I think it would be very useful if there was a way to send the project files (mostly palettes.dat) to the display using USB (in a way it gets stored on the SD as well). I have not yet found it. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted May 16, 2016 Content Provider Share Posted May 16, 2016 There is a upload function integrated in pin2dmd.exe and the firmware which is also used by Steves editor. The last time I tested it it was not working correctly with the editor but Steve might have fixed it in the latest release. If not you can use the /u command line option followed by source filename and destination filename. Link to comment Share on other sites More sharing options...
Content Provider comicalman Posted May 20, 2016 Content Provider Share Posted May 20, 2016 Is this supposed to upload to the SD-Card? Is the syntax something like this: >pin2dmd /u file1.dat palettes.dat >pin2dmd /u file2.fsq pin2dmd.fsq I tried this, and it does not seem to overwrite the files on the card. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted June 1, 2016 Content Provider Share Posted June 1, 2016 fixed in the next version. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.