coyote Posted April 22, 2016 Share Posted April 22, 2016 Hey guys - Anyone seen this before? Whatever this is, it's been getting worse. The first time it happened, a couple weeks ago, I simply moved my display cable (display driver to shield) and it stopped. It came back later, and I had to move the cable again, but had to move it a lot more before it cleared. Now, today, it returned again - and this time - no matter how I move the ribbon cable, it doesn't clear up. Thoughts? -Me. Link to comment Share on other sites More sharing options...
mikeww1 Posted April 22, 2016 Share Posted April 22, 2016 If its a real machine I had a similar problem . The reason was the ribbon cable connecting the DMD and the related contacts. After treatment with contact cleaner spray and reseating of both ends it works well again Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted April 22, 2016 Content Provider Share Posted April 22, 2016 If its a real machine I had a similar problem . The reason was the ribbon cable connecting the DMD and the related contacts. After treatment with contact cleaner spray and reseating of both ends it works well again ...or bad soldering on one of the pins. Link to comment Share on other sites More sharing options...
coyote Posted April 22, 2016 Author Share Posted April 22, 2016 Thanks guys - will tear it apart and do a close look at soldering on both areas..! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.