Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
UncleSash

Pin2Dmd Order Thread - Worldwide

Recommended Posts

Of course... I do this to become a rich person!

The Ferrari is all ready ordered!

There is no User from the orders who get a 1.37 or older Version, since there is the 2.x out.

But it is OK.

Because from now on, is eveytime the OpenSource Version on my Controllers!

Because the german Pin2DMD is selling it Products commercial!

Good bye OpenSource...

But UncleSash is still the bad one... Oh yes!

Maybe we find some Users from the last Orders, who are able to proof that there kits are shipped with the latest FW on the Controller.....

@Jörg: Typisch Deutsch wie du reagierst!

Wegen Egomanen wie dir, bin ich ausgewandert!

Share this post


Link to post
Share on other sites

 

 

Right ! That´s what happens when someone get´s caught with his hand in the till and now trying to save his own skin.

It is well know to us that UncleSash is selling his hardware with the old open source version of our software, we just draw the

consequences now. Anyone in doubt that the money from the activation is not forwarded to the associations we support

dann get in contact with them. 

 

http://www.soh-kenya.de

www.stelzenmaennchen.de/

 

Everybody with a healthy brain can imagine that a 10 Euro activation key can´t have a commercial reason.

From Steve and my side the project will stay non commercial and every cent will be forwarded to our charity 

projects.

 

It is really sad that there is envy even for charitable commitment

Lucky1

P.S.: I will leave the decision if that post is enough to block him out of this forum to the admin.

I will simply ignore this stupidity.

 

 

Just to make it clear...

here is the Official list from my Paypal account and the Donations to Lucky1!

https://www.dropbox.com/s/3q8yhe504s32egg/Spenden%20an%20Joerg%20-%20Pin2DMD.png?dl=0

 

He refunded my last Donation, because he is pissed off!

 

 

And maybe, some from last clients from the last orders, can say something about there FW Version on the Controllers.

Or maybe every USer since the FW Version 2.0.

That would be great!

And maybe about what I charged them, for there FW Version?!

 

Because Lucky1 says, that I'll be a Thief!

 

 

Thank you Community!

 

 

@ Joerg: Ironie versteht wohl nicht jeder...

 

Money money money...

:D

Share this post


Link to post
Share on other sites

One of the reasons for the split is that there is no explanation

for the upload of the old firmware with the comment (no key) in

May when the first V2 firmware came out in February.

This is simple sabotage of our charity idea.

post-7772-0-38076500-1471590249_thumb.png

Share this post


Link to post
Share on other sites

Hmmmm. Why do such noble ideas always go down the wrong way...

Share this post


Link to post
Share on other sites

I must be guilty, because of uploading an OpenSource Code..... :(

 

When my last PCBs are gone.. Is there no more support for Pin2DMD.

After it, I will upload all my Eagle Files, so everybody can use it....

 

 

A very sad Sascha.... :( :( :(

Share this post


Link to post
Share on other sites

Hmmmm. Why do such noble ideas always go down the wrong way...

Yea seems all good projects go down the tube

Very sad and sorry to here

Sent from my SM-G900I using Tapatalk

  • Upvote 1

Share this post


Link to post
Share on other sites

I bought two boards from Sash, and they had the most current firmware un-activated. It would be nice to have a copy of the old firmware around in case you disappear. I don't really understand.

  • Upvote 1

Share this post


Link to post
Share on other sites

Send me a PM and you get a link to download the old OpenSource Version.

And don't worry.

I stay here and support all my clients.

I just stop to work in one Team with the inventors from Pin2DMD.

  • Upvote 1

Share this post


Link to post
Share on other sites

I bought two boards from Sash, and they had the most current firmware un-activated. It would be nice to have a copy of the old firmware around in case you disappear. I don't really understand.

 

 

PIN2DMD is a project from Steve45 and me. The project itself is not affected at all through what is going on here.

Share this post


Link to post
Share on other sites

Hello everybody.

After 3 weeks vacation time... I am back in the States and I still sale my Pin2DMD Shields for Lucky1's great Pin2DMD Firmware!

Ther are still enough PCBs in Stock.

Whenever they are empty and there are still some people who like the cheap and easy Version, I go forward and Order another batch of 10 or 20 pcs.

Right now, is there no future for the V3 Shield from my side, for my own Shield Version.

I hope that everybody understand my Situation.

 

But I work on a small PCB with a few Buttons.

  •     4 Service Buttons (to browse the rom)
  •     2 Buttons for the PC Volume Control
  •     1 Button for PC-HARD-Reset function

Just give me some feedback if anybody likes it or has an Idea which Button is missing.

When I find just 1 or 2 Persons who takes one, I will order a Batch of 10.
The Price will be 4 USD for the PCB and maybe 1 to 3 Dollar for the parts.

best regards

Sascha

Share this post


Link to post
Share on other sites

Maybe a way to add a mercury switch for tilt. Just a idea?

Sent from my SM-G900I using Tapatalk

  • Upvote 1

Share this post


Link to post
Share on other sites
Maybe a way to add a mercury switch for tilt. Just a idea?

Sent from my SM-G900I using Tapatalk





Sounds interesting to me.
I was thinking about mercury switches, but never worked with them.
But I order some tonight to play with it.

Usually we need just one?
Like a regular tilt switch.

It is a nice Idea.

Share this post


Link to post
Share on other sites


Sounds interesting to me.
I was thinking about mercury switches, but never worked with them.
But I order some tonight to play with it.

Usually we need just one?
Like a regular tilt switch.

It is a nice Idea.

Here a PIC of mine on the brace that's behind the cash box10bc2c07c4a2e4b555c043d23aac5a64.jpg

Sent from my SM-G900I using Tapatalk

Share this post


Link to post
Share on other sites

Here a PIC of mine on the brace that's behind the cash box10bc2c07c4a2e4b555c043d23aac5a64.jpg

Sent from my SM-G900I using Tapatalk



I try it out and make the design.
My first idea is to put the switch on the pcb somehow.

Share this post


Link to post
Share on other sites

Has to be above or on side so you can bend to adjust

Sent from my SM-G900I using Tapatalk

  • Upvote 1

Share this post


Link to post
Share on other sites

20 switches are on the way, hopefully they will work out.
0.60 $ a piece is a good deal ;-)



Edit: 0.40 a piece...

Share this post


Link to post
Share on other sites

Got the Data online for the V3 Shield! (GitHub page from Lucky1)

It looks like, that I use the Data and made a improved Shield Version and sell it here!

Updates are coming in the next Days!
When someone wants it!!!

And everybody who is interested in the schematic for the V3 shield, just ask me!
It will be ready in a couple of days!

Share this post


Link to post
Share on other sites
11 hours ago, UncleSash said:

Got the Data online for the V3 Shield! (GitHub page from Lucky1)

It looks like, that I use the Data and made a improved Shield Version and sell it here!

What do you want to improve ? Put your name on it ? :lol:

I wouldn´t even care if you or anybody else would take the design as it is and just order the pcbs and sell them.

Copy is the highest form of flattery.

Share this post


Link to post
Share on other sites

And well, before I forget it:
My goal was not to create any new shield.
My goal was something different and it is all ready reached.

The new goal is: support the community and friends from the Pinball world with a non expensive RGB-DMD-V3-USA Shield.

Share this post


Link to post
Share on other sites
On 19.8.2016 at 3:05 PM, UncleSash said:

When my last PCBs are gone.. Is there no more support for Pin2DMD.

After it, I will upload all my Eagle Files, so everybody can use it....

 

On 13.9.2016 at 9:35 PM, UncleSash said:

Got the Data online for the V3 Shield! (GitHub page from Lucky1)

It looks like, that I use the Data and made a improved Shield Version and sell it here!

 

... and again money seems to be more important to you than integrity.

Find what ever excuse for your behaviour and go on however you want.

You have my deepest compassion.
 

Share this post


Link to post
Share on other sites

Boys you both have done fantastic work. But the banter is getting down to a Facebook spat. Just sayin

Sent from my SM-G900I using Tapatalk

  • Upvote 1

Share this post


Link to post
Share on other sites
Boys you both have done fantastic work. But the banter is getting down to a Facebook spat. Just sayin

Sent from my SM-G900I using Tapatalk





Sorry, you are right!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...