Content Provider UncleSash Posted August 19, 2016 Author Content Provider Share Posted August 19, 2016 Of course... I do this to become a rich person! The Ferrari is all ready ordered! There is no User from the orders who get a 1.37 or older Version, since there is the 2.x out. But it is OK. Because from now on, is eveytime the OpenSource Version on my Controllers! Because the german Pin2DMD is selling it Products commercial! Good bye OpenSource... But UncleSash is still the bad one... Oh yes! Maybe we find some Users from the last Orders, who are able to proof that there kits are shipped with the latest FW on the Controller..... @Jörg: Typisch Deutsch wie du reagierst! Wegen Egomanen wie dir, bin ich ausgewandert! Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted August 19, 2016 Author Content Provider Share Posted August 19, 2016 Right ! That´s what happens when someone get´s caught with his hand in the till and now trying to save his own skin. It is well know to us that UncleSash is selling his hardware with the old open source version of our software, we just draw the consequences now. Anyone in doubt that the money from the activation is not forwarded to the associations we support dann get in contact with them. http://www.soh-kenya.de www.stelzenmaennchen.de/ Everybody with a healthy brain can imagine that a 10 Euro activation key can´t have a commercial reason. From Steve and my side the project will stay non commercial and every cent will be forwarded to our charity projects. It is really sad that there is envy even for charitable commitment Lucky1 P.S.: I will leave the decision if that post is enough to block him out of this forum to the admin. I will simply ignore this stupidity. Just to make it clear... here is the Official list from my Paypal account and the Donations to Lucky1! https://www.dropbox.com/s/3q8yhe504s32egg/Spenden%20an%20Joerg%20-%20Pin2DMD.png?dl=0 He refunded my last Donation, because he is pissed off! And maybe, some from last clients from the last orders, can say something about there FW Version on the Controllers. Or maybe every USer since the FW Version 2.0. That would be great! And maybe about what I charged them, for there FW Version?! Because Lucky1 says, that I'll be a Thief! Thank you Community! @ Joerg: Ironie versteht wohl nicht jeder... Money money money... Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted August 19, 2016 Content Provider Share Posted August 19, 2016 One of the reasons for the split is that there is no explanation for the upload of the old firmware with the comment (no key) in May when the first V2 firmware came out in February. This is simple sabotage of our charity idea. Link to comment Share on other sites More sharing options...
mpad Posted August 19, 2016 Share Posted August 19, 2016 Hmmmm. Why do such noble ideas always go down the wrong way... Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted August 19, 2016 Author Content Provider Share Posted August 19, 2016 I must be guilty, because of uploading an OpenSource Code..... When my last PCBs are gone.. Is there no more support for Pin2DMD. After it, I will upload all my Eagle Files, so everybody can use it.... A very sad Sascha.... :( Link to comment Share on other sites More sharing options...
martymoose69 Posted August 19, 2016 Share Posted August 19, 2016 Hmmmm. Why do such noble ideas always go down the wrong way...Yea seems all good projects go down the tubeVery sad and sorry to here Sent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
supermoot Posted August 19, 2016 Share Posted August 19, 2016 I bought two boards from Sash, and they had the most current firmware un-activated. It would be nice to have a copy of the old firmware around in case you disappear. I don't really understand. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted August 19, 2016 Author Content Provider Share Posted August 19, 2016 Send me a PM and you get a link to download the old OpenSource Version. And don't worry. I stay here and support all my clients. I just stop to work in one Team with the inventors from Pin2DMD. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted August 19, 2016 Content Provider Share Posted August 19, 2016 I bought two boards from Sash, and they had the most current firmware un-activated. It would be nice to have a copy of the old firmware around in case you disappear. I don't really understand. PIN2DMD is a project from Steve45 and me. The project itself is not affected at all through what is going on here. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 13, 2016 Author Content Provider Share Posted September 13, 2016 Hello everybody. After 3 weeks vacation time... I am back in the States and I still sale my Pin2DMD Shields for Lucky1's great Pin2DMD Firmware! Ther are still enough PCBs in Stock. Whenever they are empty and there are still some people who like the cheap and easy Version, I go forward and Order another batch of 10 or 20 pcs. Right now, is there no future for the V3 Shield from my side, for my own Shield Version. I hope that everybody understand my Situation. But I work on a small PCB with a few Buttons. 4 Service Buttons (to browse the rom) 2 Buttons for the PC Volume Control 1 Button for PC-HARD-Reset function Just give me some feedback if anybody likes it or has an Idea which Button is missing. When I find just 1 or 2 Persons who takes one, I will order a Batch of 10. The Price will be 4 USD for the PCB and maybe 1 to 3 Dollar for the parts. best regards Sascha Link to comment Share on other sites More sharing options...
martymoose69 Posted September 13, 2016 Share Posted September 13, 2016 Maybe a way to add a mercury switch for tilt. Just a idea? Sent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 13, 2016 Author Content Provider Share Posted September 13, 2016 Maybe a way to add a mercury switch for tilt. Just a idea? Sent from my SM-G900I using TapatalkSounds interesting to me. I was thinking about mercury switches, but never worked with them. But I order some tonight to play with it. Usually we need just one?Like a regular tilt switch. It is a nice Idea. Link to comment Share on other sites More sharing options...
martymoose69 Posted September 13, 2016 Share Posted September 13, 2016 Sounds interesting to me. I was thinking about mercury switches, but never worked with them. But I order some tonight to play with it. Usually we need just one?Like a regular tilt switch. It is a nice Idea. Here a PIC of mine on the brace that's behind the cash boxSent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 13, 2016 Author Content Provider Share Posted September 13, 2016 Here a PIC of mine on the brace that's behind the cash boxSent from my SM-G900I using TapatalkI try it out and make the design. My first idea is to put the switch on the pcb somehow. Link to comment Share on other sites More sharing options...
martymoose69 Posted September 13, 2016 Share Posted September 13, 2016 Has to be above or on side so you can bend to adjustSent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 13, 2016 Author Content Provider Share Posted September 13, 2016 20 switches are on the way, hopefully they will work out. 0.60 $ a piece is a good deal ;-)Edit: 0.40 a piece... Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 13, 2016 Author Content Provider Share Posted September 13, 2016 Got the Data online for the V3 Shield! (GitHub page from Lucky1)It looks like, that I use the Data and made a improved Shield Version and sell it here!Updates are coming in the next Days!When someone wants it!!! And everybody who is interested in the schematic for the V3 shield, just ask me!It will be ready in a couple of days! Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted September 14, 2016 Content Provider Share Posted September 14, 2016 11 hours ago, UncleSash said: Got the Data online for the V3 Shield! (GitHub page from Lucky1) It looks like, that I use the Data and made a improved Shield Version and sell it here! What do you want to improve ? Put your name on it ? I wouldn´t even care if you or anybody else would take the design as it is and just order the pcbs and sell them. Copy is the highest form of flattery. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 14, 2016 Author Content Provider Share Posted September 14, 2016 Also deleted...To much Kindergarten trouble Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 14, 2016 Author Content Provider Share Posted September 14, 2016 And well, before I forget it:My goal was not to create any new shield. My goal was something different and it is all ready reached. The new goal is: support the community and friends from the Pinball world with a non expensive RGB-DMD-V3-USA Shield. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted September 15, 2016 Content Provider Share Posted September 15, 2016 On 19.8.2016 at 3:05 PM, UncleSash said: When my last PCBs are gone.. Is there no more support for Pin2DMD. After it, I will upload all my Eagle Files, so everybody can use it.... On 13.9.2016 at 9:35 PM, UncleSash said: Got the Data online for the V3 Shield! (GitHub page from Lucky1) It looks like, that I use the Data and made a improved Shield Version and sell it here! ... and again money seems to be more important to you than integrity. Find what ever excuse for your behaviour and go on however you want. You have my deepest compassion. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 15, 2016 Author Content Provider Share Posted September 15, 2016 Deleted... Link to comment Share on other sites More sharing options...
martymoose69 Posted September 15, 2016 Share Posted September 15, 2016 Boys you both have done fantastic work. But the banter is getting down to a Facebook spat. Just sayinSent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 15, 2016 Author Content Provider Share Posted September 15, 2016 Boys you both have done fantastic work. But the banter is getting down to a Facebook spat. Just sayinSent from my SM-G900I using TapatalkSorry, you are right! Link to comment Share on other sites More sharing options...
Brian74 Posted September 16, 2016 Share Posted September 16, 2016 Pm sent Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.