latin625 Posted July 22, 2017 Share Posted July 22, 2017 can I buy a kit to convert my pindmd3 to pin2dmd? How much and where can I order? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted July 23, 2017 Author Content Provider Share Posted July 23, 2017 can I buy a kit to convert my pindmd3 to pin2dmd? How much and where can I order?Send me a PM Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 11, 2017 Author Content Provider Share Posted September 11, 2017 Hello Folks. I am back from Vacation, but not in Town for the next week. But I Ordered the first batch from the V4 Shield, they should be available in 2 Weeks. (except the SD Card reader) The PCB Design is the reference design from Lucky1. I also Orderd the Original WaveShare micro SD Card Shield , from the Waveshare webdside (delivery takes 2-4 weeks) The Price is all most the same. just 5 Bugs more, because of teh Expensive SD Card Shield and the new Controller. The rest is the same. I have also 14 pcs V3 shields (+ 9 STM Dicovery Controllers), still here. The will go for a nice Discounted price, when I am back in South Carolina (next week). Link to comment Share on other sites More sharing options...
jesperpark Posted September 13, 2017 Share Posted September 13, 2017 PM Sent Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted September 16, 2017 Author Content Provider Share Posted September 16, 2017 Hello Guys. I have an update for all. My Company send me to the Tesla Plant in CA. The Plan was that my flight back home is on the 09-18-2017, but that plan changed. Our Customer need me for Production Start up.Now I stuck here for the next 1-2 weeks.That means, that all Orders have to wait, until I am back Home in SC. Sorry for that. - Sascha Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 1, 2017 Author Content Provider Share Posted October 1, 2017 The NEW V4 Shield is coming ...That means... ALL V3 Shield, who are left in Stock, are going on SALE!25% Discount on ALL V3 Sets! Frames are still out of Stock, but they should arrive in the next Days. And last but not least: I am in California (Freemont, TESLA Motors Plant), from Mondaz 10-02-2017 until Friday 10-13-2017. Everybody can Order, but I am not able to Ship them before: Monday 10-16-2017. regards Sascha Link to comment Share on other sites More sharing options...
jk40001 Posted October 7, 2017 Share Posted October 7, 2017 Sorry for a dumb question from a newbee, but is there any list of o V4 benefits over V3 so I can decide whether to wait for of new version or take advantage of V3 sale? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 7, 2017 Author Content Provider Share Posted October 7, 2017 Sorry for a dumb question from a newbee, but is there any list of o V4 benefits over V3 so I can decide whether to wait for of new version or take advantage of V3 sale?Maybe@Lucky1 is able to list the real benefits of the new V4 Shield. But when you go within a V-Pin, is this V3 Sale offer perfect. So far is understood him, are the new benefits more on the real Pinball side. Like the CAN Bus output.And thats it on the Hardware side for now. But in the near future will be there a option to run it as replacement for old DataEast 128x16 DMDs. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 7, 2017 Author Content Provider Share Posted October 7, 2017 Double post Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted October 7, 2017 Content Provider Share Posted October 7, 2017 3 hours ago, UncleSash said: Maybe@Lucky1 is able to list the real benefits of the new V4 Shield. The discovery board has a lot of hardware onboard like sound output or gyro which is not needed for pin2dmd but limits the number of usable pins for it. The Nucleo board is cleaner. The Nucleo design is also more future proof because it supports a wider range of processors without changing the pinout. So if STM decides to stop production for the discovery F4 board we already have an equivalent alternative. And even if they stop the production of the STM32F429 Nucleo board we can switch to a newer Nucleo board without changing the shield. From the functional side it is exactly the same except the 128x16 support for real DataEast pinball machines we recently added and the CAN bus interface we added without really having a specific use case in mind. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 11, 2017 Author Content Provider Share Posted October 11, 2017 Hello Folks. I ordered new PCBs and this time also #Pinscape Shields. Available in week 44, October the 30th, 2017! They go on sale WITH NO PARTS, PCB ONLY! For only: 4.00 USD = Mainboard 4.00 USD = Powerboard 3.00 USD = Chimeboard 9.00 USD = complete Set of all Just add Shipping costs to your Country. It is Shipped from inside USA (South Carolina) Shipping starts with 4.00 USD. Example: 9.00 USD = 1x Set of all 3 8.00 USD = Shipping from SC to CA (USPS priority or Ground) Total: 17.00 USD Link to comment Share on other sites More sharing options...
martymoose69 Posted October 11, 2017 Share Posted October 11, 2017 Hello Folks. I ordered new PCBs and this time also #Pinscape Shields. They go on sale WITH NO PARTS, PCB ONLY! For only: 4.00 USD = Mainboard 4.00 USD = Powerboard 3.00 USD = Chimeboard 9.00 USD = complete Set of all Just add Shipping costs to your Country. It is Shipped from inside USA (South Carolina) Shipping starts with 4.00 USD. Example: 9.00 USD = 1x Set of all 3 8.00 USD = Shipping from SC to CA (USPS priority or Ground) Total: 17.00 USD Is there any changes and if so a updated parts listSent from my Redmi Note 3 using Tapatalk Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 11, 2017 Author Content Provider Share Posted October 11, 2017 It is the Original PCB from MJR Webside. I use his GERBER Files to Order PCBs. Partlist is exactly the same! http://mjrnet.org/pinscape/expansion-board.html Everyone can Order PCBs for a low Price from my Thread here. ALL PCB's are PCB ONLY! NO PARTS! The picture is just a reference, because I don't have the PCB's in my Hands, they need 2 weeks to get delivered. As soon I get them, I will update the pictures! But I think the Price is interesting. I orderd a batch of 10 each. And when it works out, I will Order more and reduce the Price a little bit more (from 4 USD down to 3USD each, Set of 3 would be 7 USD then). But first, must the 1st batch been sold. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 20, 2017 Author Content Provider Share Posted October 20, 2017 Hello Folks. All V3 Controllers are SOLD OUT. But there are still a few V3 Shields there! Get the Chance and grab yours! You can get the Controller from ebay, DigiKey, Ali, etc. - Sascha Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 20, 2017 Author Content Provider Share Posted October 20, 2017 V4 Shields are LIVE! Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted October 21, 2017 Author Content Provider Share Posted October 21, 2017 V4 Shield SALE is LIVE! V4 Supports XL DMDs for SEGA Machines!Start to Order on the first page of this Thread! V4 Set 1: Pinball with WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball and WiFi)WITH soldering service (up to 14 Days lead time for every soldered set!) costs: 65.00 USD + Shipping V4 Set 2: Pinball NO WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball)WITH soldering service (up to 14 Days lead time for every soldered set!) costs: 60.00 USD + Shipping V4 Set 3: DIY - Pinball with WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball and WiFi)NO soldering service!!! costs: 60.00 USD + Shipping V4 Set 4: DIY - Pinball NO WiFi !!!V4!!! STM Controller Nucleo, preloaded with latest Pin2DMD Firmware (need activation on Pin2DMD.com) V4 Shield (with parts for Virtual/real Pinball)NO soldering service!!! costs: 55.00 USD + Shipping Plus Shipping costs: 7.50 USD = Shipping inside US with USPS Priority Mail Small Flat Rate Box (for one Set, when you have more as one, please ask me for pricing) or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted November 19, 2017 Author Content Provider Share Posted November 19, 2017 some small update...https://www.facebook.com/UncleSash/posts/698432687031029 Link to comment Share on other sites More sharing options...
chicco73 Posted December 27, 2017 Share Posted December 27, 2017 Hello, I need a shield for pin2dmd for a DataEast pinball Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted January 14, 2018 Author Content Provider Share Posted January 14, 2018 Inventory clearance from some old Order V4 Shields. The very 1st official design has one missing connection. And now I have over 30 boards for V-Pin only. Anyone need some? 1.75 USD each (pcb only, + shipping) quantity discount possible 1 set of V-Pin only parts (NO WiFi, NO max232, NO real pin enhancer ) = 10 USD (WiFi is extra 5 USD, but not really needed for V-Pin, because of the uninterrupted USB connection) Nucleo 144 = 27.00 USD - Sascha Mail: [email protected] Link to comment Share on other sites More sharing options...
SoCalPlayer Posted January 15, 2018 Share Posted January 15, 2018 I would like to buy a full set of Pinscape boards. Does anyone have a set for sale? If not, let me know I will go online and order some. David Link to comment Share on other sites More sharing options...
Rappelbox Posted January 15, 2018 Share Posted January 15, 2018 Depending on where you’re from unclesash should have some for you or I can help you with them too. Ready soldered or naked pcbs Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted January 19, 2018 Author Content Provider Share Posted January 19, 2018 Hello VPU User. Tonight was the time to upgrade mit Go-DMD Clock with Ambi Light. My Go-DMD runs with a VET6 Board (the cheaper one) and not with the Pin2DMD Shield. Hardware for my Test: VET6 Board (FW godmd-stm32-vet6-v1.07-59) Shield (bei Steve) CD74HCT245E (THT IC for easy Soldering) with a small DIY dirty Adapter Board 8x8 Feld WS2812 Matrix field And I reached the Goal after 20 minutes. It looks very nice. The next step is, to integrate the WiFi, make it attachable directly to the LED Display and my Frame for P2.5 Panels (like the Pin2DMD). Is anyone interested in that? When YES, I will go forward and create a nice Shield for it. - Sascha Attached some pictures.... Link to comment Share on other sites More sharing options...
lcancel Posted February 7, 2018 Share Posted February 7, 2018 On 11/3/2015 at 12:53 PM, UncleSash said: V4 Set 1: Pinball with WiFi !!!V4!!! On 11/3/2015 at 12:53 PM, UncleSash said: V4 Set 5: DC-DC Converter (ready to use) On 11/3/2015 at 12:53 PM, UncleSash said: Frame for P2.5 DMD Panels 128x32 pixel (black acrylic): 1x 128x64 pixel P2.5 RGB 1/16 scan LED Module (2x 64x32 pixel, or 1x 64x64 pixel 1/16 scan to detache them) Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted February 8, 2018 Author Content Provider Share Posted February 8, 2018 1x 128x64 pixel P2.5 RGB 1/16 scan LED Module (2x 64x32 pixel, or 1x 64x64 pixel 1/16 scan to detache them) Please send me a PM. Link to comment Share on other sites More sharing options...
esmoger Posted February 20, 2018 Share Posted February 20, 2018 are these still available? sent a pm Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.