Content Provider UncleSash Posted December 28, 2016 Author Content Provider Share Posted December 28, 2016 Yes I got everything from you July 6,2016 @ $119US. As you can see in the previous post I have already tried ST-Link 007. The note that came with the 2 units said that the newest firmware was on them that all I needed to was activate them. I though I already had activated them but upon looking at my PayPal account It doesn't appear so. Also, I believe doing the donation at www.pin2dmd.com PayPal is in German. Although I am of German birth, I can;t read or speak it. Is there an English version?All Sets that I shipped are tested with my DMD. And also preloaded with the latest FW that was available on the day before shipping. I am not responsible for the pin2dmd page. Please contact Lucky1 for that. My support was only for the OpenSource Version no longer for the licensed Version. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted December 28, 2016 Content Provider Share Posted December 28, 2016 10 hours ago, draziw1 said: Yes I got everything from you July 6,2016 @ $119US. As you can see in the previous post I have already tried ST-Link 007. The note that came with the 2 units said that the newest firmware was on them that all I needed to was activate them. I though I already had activated them but upon looking at my PayPal account It doesn't appear so. Also, I believe doing the donation at www.pin2dmd.com PayPal is in German. Although I am of German birth, I can;t read or speak it. Is there an English version? I changed the language button to english. Please try again Link to comment Share on other sites More sharing options...
draziw1 Posted December 29, 2016 Share Posted December 29, 2016 Still no go on PayPal, I clicked on the Donate button in your sig, Is there another place I need to do this?? Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted December 29, 2016 Content Provider Share Posted December 29, 2016 There is a e-mail address displayed on the top of the paypal link. You can also send it to that address. Link to comment Share on other sites More sharing options...
draziw1 Posted December 29, 2016 Share Posted December 29, 2016 OK I was able to send the donation for device #39004F00085152 but put the wrong user name. I put draziw when it should have been draziw1. I had to login to PayPal in order to get the English part to complete the transaction. Thanks. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted January 12, 2017 Author Content Provider Share Posted January 12, 2017 A new batch of V3.2 Shields are planned. They will be in Stock in mid of February. I try to lower the price for my Shields, but first I have to Order the naked PCBs and then I can quote them. Thank to all my customers.... YOU made PIN2DMD great again! regards Sascha Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted February 6, 2017 Author Content Provider Share Posted February 6, 2017 Hello everybody. I decided to make a new batch of RGB DMD Shields aka Pin2DMD Shields. After Louis is doing his own stuff, I like to support our community with some more non exoensive shields.@pinballsp I must say I like his new DMD Version with his own Controller, deep respect from my side, it is a lot of work!!! Today I was able to place my Order at the PCB manufacturerer, small delay because of the Chinese NEW Year!@lucky1 I hope that you don't changed anything in your Hardware Layout for the Pin2DMD. A small sneak peak from the new Layout; (I send NO more PCBs with the WiFi! It is to expensive and useless for me, but the Pins for a ESP-01 or ESP-12 are on the PCB) changes: STM mounting is like on the rev 1 and 2 Shields, a second choice for a smaller rtc Module (a very small one, that I use for my Pi) for the Go-DMD features. Full SD or micro SD Card reader, a connector for a direct mount on the DMD Displays (but I don't have the long female headers!) Thats all@OzStick I haveyou in my mind, I was just extremly busy the last weeks! Sorry, regards Sascha Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted February 7, 2017 Content Provider Share Posted February 7, 2017 8 hours ago, UncleSash said: @lucky1 I hope that you don't changed anything in your Hardware Layout for the Pin2DMD. No change since my V3 shield layout on github. Here is an example for the elevated pin headers https://www.aliexpress.com/item/10PCS-2X7-Pin-2-54-mm-Stackable-11mm-Long-Legs-Female-Header-Shield/32713400083.html Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted February 7, 2017 Author Content Provider Share Posted February 7, 2017 11 hours ago, lucky1 said: No change since my V3 shield layout on github. Here is an example for the elevated pin headers https://www.aliexpress.com/item/10PCS-2X7-Pin-2-54-mm-Stackable-11mm-Long-Legs-Female-Header-Shield/32713400083.html Thanks. Edit: That was for 2x7 pin, but we need 2x8 Pin. Sorry. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted February 7, 2017 Content Provider Share Posted February 7, 2017 9 hours ago, lucky1 said: No change since my V3 shield layout on github. Here is an example for the elevated pin headers https://www.aliexpress.com/item/10PCS-2X7-Pin-2-54-mm-Stackable-11mm-Long-Legs-Female-Header-Shield/32713400083.html of course you need the 16pin version for the panels Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted February 7, 2017 Author Content Provider Share Posted February 7, 2017 4 hours ago, lucky1 said: of course you need the 16pin version for the panels Well, when they are some... I can't find them. But I found a different Soultion.@lucky1Thank you anyway to help me out. for all: All V3 Shields from UncleSash are now able to get Piggy Mounted to the DMD. All parts are orderd. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted February 8, 2017 Author Content Provider Share Posted February 8, 2017 Hello together! brecause of missing communication and my fault, is there a problem with the signal enhance on my V3..1 Shields and also on the new orderd shields, I missed the HIGH signal (5V DC) on the CLR pin (Pin3) from the 74LS123N chip. The solutions is easy, solder a wire bridge from Pin16 to Pin3 or put a small wire in both sides stranded and put the 74LS123N back in place. 1st picture the solutions2nd picture the schematic with the missing 5V line.Now I hope that everybody understand what the problem is and how the circuit is connected When someone like to get the whole schematic, feel free to contact me. regards Sascha. Link to comment Share on other sites More sharing options...
BamBam Posted February 25, 2017 Share Posted February 25, 2017 On 2015-11-03 at 11:53 AM, UncleSash said: Welcome to UncleSash´s offical Pin2DMD order thread! Save money and just buy here in the Forum! All Parts are sold for almost the cost what I have to pay for it! Pin2DMD is invented by Lucky1 and Steve45! Pin2DMD Froum: http://vpuniverse.com/forums/forum/132-pin2dmd/ How to Order: Select your matching Set or ask for a different combination send me a PM with the Set that you want and the destination Country and I will send you a total When you don't know what you need, feel free to ask me with a PM! Shipping: Worldwide with USPS or any Carrierer that you want Payment: How: only with PayPal All Orders have to be paid in advanced when you place your Order! exceptions possible Firmware Version: rev 2.xy (the latest, need activation) - features all new functions for a perfect experience in real Pinball! FW Version 2.x activation or/and Download: have to be made on www.Pin2DMD.com Start to Order here: Available rev 3.2 RGB-DMD Shield for Pin2DMD and GO-DMD: (18-02-2016 09:30 PM, ET) 0 pcs rev 3.2 SHIELD (PCBs) in stock - new ones are coming in on 25-02-2017! V3.2 - front view with Controller: picture follows in the next days (18-02-17) V3.2 back of the shield: picture follows in the next days (18-02-17) Here the 10 different combination, Pinball, GO-DMD, DIY, etc.:Set 1: Pinball STM Controller (25.50 USD) V3.2 Shield (with parts for Virtual/real Pinball) (20.00 USD)WITH soldering service (10.00 USD) costs: 55.50 USD + Shipping Set 2: Pinball, DIY STM Controller (25.50 USD) V3.2 Shield (with parts for Virtual/real Pinball) (20.00 USD)NO soldering service costs: 45.50 USD + Shipping Set 3: Pinball, but no Controller V3.2 Shield (with parts for Virtual/real Pinball) (20.00 USD)WITH soldering service (10.00 USD) costs: 30 USD + Shipping Set 4: Pinball, just the PCB, DIY V3.2 Shield (with parts for Virtual/real Pinball) (20.00 USD)NO soldering service costs: 20 USD + Shipping Set 5: GO-DMD STM Controller (25.50 USD) V3.2 Shield (with GO-DMD parts) (26.50 USD)WITH soldering service (10.00 USD) costs: 62.00 USD + Shipping Set 6: GO-DMD, DIY STM Controller (25.50 USD) V3.2 Shield (with GO-DMD parts) (26.50 USD)NO soldering service costs: 52.00 USD + Shipping Set 7: GO-DMD, DIY, no Controller V3.2 Shield (with GO-DMD parts) (26.50 USD)NO soldering costs: 26.50 USD + Shipping Set 8: Pinball and GO-DMD STM Controller (25.50 USD) V3.2 Shield (with parts for Virtual/real Pinball and GO-DMD) (28.50 USD)WITH soldering service (10.00 USD) costs: 64.00 USD + Shipping Set 8: Pinball and GO-DMD, DIY STM Controller (25.50 USD) V3.2 Shield (with parts for Virtual/real Pinball and GO-DMD) (28.50 USD)NO soldering service costs: 54.00 USD + Shipping Set 10: hardcore DIY - V3-Shield PCB only V3.2 Shield (NO parts at all) (6.00 USD) costs: 6.0 USD + Shipping Plus Shipping costs: 7.00 USD = Shipping inside US with USPS Priority Mail Small Flat Rate Box variable Shipping costs for Wold wide shipping, please contact me for pricing Available rev 1.0 V-Pin Service Button Shield (black edition): (18-02-2016 09:30 PM, ET) 4 pcs rev 1.0 SHIELD in stock rev 1.0 black Edition V-Pin Service Button Shield Shield and Parts for rev 1.0 PCB: 3.00 USD Parts: 5.50 USD (includes all parts, also mercury switch) Parts NO mercury switch: 4.60 USD assembly service: 5.00 USD PCB Standoffs: 2.00 USD Plus Shipping costs: 3.00 USD = domestic USPS first clas package 7.00 USD = domestic USPS Priority Mail (1-3 days) Small Flat Rate Box or Low cost shipping - price depends on weight - very recommend for Orders outside from the US! Available STm32F4 Controllers: (18-02-2016 09:30 PM, ET) 2 in Stock, more on the way (from US Store, 3 days delivery time) Controllers: (select your Products, Controller + FW Version!) 25.50 USD each = Stm32F407 VGT6 "DISC1" Board (21.17 Controller (Digi-Key) + TAX + Shipping + 0.50 for Sascha) 0.00 USD = Pin2DMD Firmware Version preloaded (need activation) Plus Shipping costs: 7.00 USD = Shipping inside US with USPS Priority Mail Small Flat Rate Box variable Shipping costs for Wold wide shipping, please contact me for pricing What you still need by yourself: 1x USB 2.0 Cable: Type-A male to Type-B MICRO male, like from your old android Phone, it is for Data transfer to PinMame or Config Tool 1x USB 2.0 Cable: Type-A male to Type-B MINI male), like from your old external 2.5" USB Harddrive, it is for Download the Firmware and to Power the Board (when no ext. source is connected) 1x 128x64 pixel P2.5 RGB 1/16 scan LED Module (2x 64x32 pixel, or 1x 64x64 pixel 1/16 scan to detache them) 5V DC, 10 A, Power Supply micro SD Card (1Gb to 16GB ist tested) I think that´s all what you need. The ribbon cables, to connect the display, comes with the display along with Power connectors. Check my Pin2DMD Album for Images: Download the actual Install Instructions:You find all insturctions here in the Download Section: http://vpuniverse.com/forums/files/category/85-pin2dmd-documentation/ now have fun with your personal Pin2DMD! Hi. I am not really sure which one to order. I am thinking it is Option 8 as I want a DMD that I can use for Visual Pinball cabinet. Is this the one that has everything I need? thanks. john Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted February 25, 2017 Author Content Provider Share Posted February 25, 2017 for the use in a V-Pin Cab is the Set # 1 perfect. but when you like to use the GO-DMD features, is set 8 also a good choice. When you decide for set 1, is it possible to solder the missing stuff onto the board, when ever you like to use it as a Go-DMD. anyways, the actual batch is sold OUT since 2 Days. sorry. But I can put you on position #2 on my PreOrder list for the next batch. the next batch should be arrive in about 2 weeks. cheers Sascha Link to comment Share on other sites More sharing options...
rablack97 Posted February 26, 2017 Share Posted February 26, 2017 Hello Sascha, I purchased a V2 board and I am having issues with it, it was working fine, and now the controller seems to hang and the leds seem really dim now as compared to before. I am not sure if the controller or the shield is damaged or if it needs to be reflashed with updated software. The led boards no longer show any animations just fuzzy color lines or just random color blocks, any idea what could of happened? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted February 27, 2017 Author Content Provider Share Posted February 27, 2017 Hey Buddy. Sad to hear that. Can you upload a video or some pictures?Did you tried to use the controller without the shield and plug it into a pc?Which FW Version do you run?May be update to the latest Version. Link to comment Share on other sites More sharing options...
rablack97 Posted March 1, 2017 Share Posted March 1, 2017 Hello Sascha, I have fixed the issue, apparently i bricked the controller board, I ordered a new board, updated to the new firmware, and its now working as expected. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 11, 2017 Author Content Provider Share Posted March 11, 2017 Some nice news...New rev 3.2b Shields are here. I just wait for the SD reader (scheduled for next week, but looks like a big delay). But Frames are also some available (15 usd each, made from black acrylic by ponoko)Over all, one complete set (the dmd ($60) and 5V power supply ($9) sold on aliexpress!) is arround 160 USD!Here a picture from a Go-DMD set with full size reader (very tight on the ribbon cable)And the Frame (3 left at the moment): Link to comment Share on other sites More sharing options...
ibjeepin Posted March 17, 2017 Share Posted March 17, 2017 So what happened to UncleSash? Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 17, 2017 Author Content Provider Share Posted March 17, 2017 I am alive!And guilty. All parts and shields are ready to be assembeld. But I have no time... my company send my to Tesla Motors in CA and all projects are sleeping on my Desk till I am back home. Next week Friday... [emoji53] Link to comment Share on other sites More sharing options...
martymoose69 Posted March 17, 2017 Share Posted March 17, 2017 Ask them to borrow car and drive hone. LolSent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Content Provider malenko Posted March 23, 2017 Content Provider Share Posted March 23, 2017 I sent you a msg on FB, but figured it cant hurt to post here (since I never do) Just wondering if you had a kit for a Gottlieb SFII , I think if I redid the DMD in color and made new animations, the game would be a shit ton better. Link to comment Share on other sites More sharing options...
Content Provider lucky1 Posted March 23, 2017 Content Provider Share Posted March 23, 2017 Just for your information Gottlieb only supports color palette switching and replacement of scenes since it already uses more than 4 shades. Link to comment Share on other sites More sharing options...
Content Provider UncleSash Posted March 28, 2017 Author Content Provider Share Posted March 28, 2017 Hello Pinball Folks. I am back home! It was a nice and streesfull time in California at the Tesla Plant. But now is time to give more Pinballs a full color RGB DMD with an Pin2DMD. These days I work hard to get the few missing order to process but I am open for new ones! Over 20 pcs Shields are in stock! Feel free to Order yours today! regards Sascha Link to comment Share on other sites More sharing options...
s3xyGerkin Posted March 29, 2017 Share Posted March 29, 2017 Yaaaaay Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.