osujd Posted October 24, 2015 Share Posted October 24, 2015 I can't decide if this is a hardware or software issue. I have recently purchased one of Zeb's analog plungers. I think for most people these work great; however I am having issues with mine. I am not sure whether this is a scripting issue on my end or an actual hardware issue. I have attached a video of whats going on but basically the plunger doesn't seem to consistently strike the ball and seem to get out of calibration very easily. If anyone has experienced this and fixed it I would appreciate any feedback IMG_1212.MOV Link to comment Share on other sites More sharing options...
Content Provider allknowing2012 Posted October 25, 2015 Content Provider Share Posted October 25, 2015 So you say the plunger is indeed holding tightly to the ring on the inside? Assume of course, that the plunger is not binding in the tube as well. Some folks say they need some 2 faced tape on the end to hold it to the plunger. One thing to try is to see what windows controller calibrate shows for the z-axis. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.