Pin2Dmd Color - Pindmd Compatible Interface With Led Rgb Color Dmd

[malenko 708]

just wanted to say 1,000th reply.

[dboyrecords 24]

That was It! Thanks for sticking with me, lucky1!!!

[lucky1 766]

Glad that it is working now.

This jumper does not even exist in my reference design on github. Sad that it causes trouble and I have to take care of it.
 

 

[UncleSash 120]

Glad that it is working now.

This jumper does not even exist in my reference design on github. Sad that it causes trouble and I have to take care of it.
 

 

It is so sad, that you blame me all the time. Just because of your ego.
I have no real pinball to try something and all jumpers are labeled. My real life job keeps me busy (yours may be not) and I don't check all the threads every day.
We worked so good together and just because of your ego it is all gone...
You say all the time "one phone call can fix a lot of issues"... so call me, when you like to fix it!

And now you can blame me again, like every time...

[dboyrecords 24]

You're both pretty.

 I didn't mean to stir the pot, I'm quite pleased with all of it. I hope you guys work out your differences for the good of the hobby. There's plenty of anger and ill will around these days...

Thank you both and everyone else involved...

[UncleSash 120]

On 23.6.2017 at 8:04 AM, lucky1 said:

Glad that it is working now.

This jumper does not even exist in my reference design on github. Sad that it causes trouble and I have to take care of it.
 

 

Good Morning Lucky1.

Today I found some time to check back with your reference Design.
And well.... just thought what I found in your Design... a Jumper for the Enhancer.
But OK... mine is a bit different, that is really my fault... Pin1 and Pin3 is changed.... sorry for that...

refernce Design:

 

UncleSash's Design:

 

[lucky1 766]

You are right ! I added this jumper because of the problems real pin pin2dmd users had with your first V3 design.
Users had to remove the LS123 and add a wire bridge to make these boards work. You like to add your own ideas
to your board designs which is O.K., but I would recommend to first discuss these ideas with us in the future. 

[UncleSash 120]

1 hour ago, lucky1 said:

You are right ! I added this jumper because of the problems real pin pin2dmd users had with your first V3 design.
Users had to remove the LS123 and add a wire bridge to make these boards work. You like to add your own ideas
to your board designs which is O.K., but I would recommend to first discuss these ideas with us in the future. 

Sound like I am invited to bring up some Ideas,

But, that Jumper Idea comes from @Rappelbox
So sad that is not mine, because I really like the Hardware bypass and would be happy when it would be my Idea.

[JosHagenaars 0]

Hello, 
will either of you be coming to the DPO 2017 NFV  in Eindhoven 2017 ?

and if so , will you bring some acryl-frames & shields for sale with you  ?
(will that be version 3 or version 4??)

greetings 
Jos 

[Rappelbox 129]

I’ll have a booth there
Bringing all the good things with me !

[JosHagenaars 0]

Sweet ! count me in !
will that be shield version 3 or version 4??) Pre-assembled ofcourse 
price indication ?

 

[Rappelbox 129]

I think both! Complete Sets, single parts and of course V3 and V4

[UncleSash 120]

I think both! Complete Sets, single parts and of course V3 and V4

Don't forget to post pictures from your "Messestand"

[Rappelbox 129]

Sure!

[JosHagenaars 0]

nice ! CU there then.
Please bring me a V4 (already solderder) and acryl-plate 

 

[UncleSash 120]

V4 Shield SALE is LIVE!
V4 Supports XL DMDs for SEGA Machines!

Edited October 24, 2017 by UncleSash
V4 Update description

[UncleSash 120]

some small update...
https://www.facebook.com/UncleSash/posts/698432687031029